Skip to content

Collection: ABAC 5 to 7.5 HP Air Compressors

ABAC 5 to 7.5 HP Air Compressors

Five to seven and a half horsepower is the band where a shop stops buying a compressor for a tool and starts buying one for the building. It covers the two to four bay automotive shop, the cabinet shop running a sander and a nailer at once, the small fabrication floor, and the maintenance department that needs air available all day rather than in bursts. ABAC serves the whole band twice over, once with two-stage piston machines and once with AS rotary screws, and the choice between them matters more than the horsepower number on the label.

Piston or rotary screw at the same horsepower

At 5 HP an ABAC two-stage piston delivers 14.6 to 16.6 CFM at 175 PSI, while the AS-5 rotary screw delivers 20.3 CFM at 125 PSI or 17.4 CFM at 150 PSI. At 7.5 HP the piston machines run 21 to 24 CFM at 175 PSI and the AS-7.5 rotary screws run 30.5 CFM at 125 PSI or 27.1 CFM at 150 PSI. The piston wins on pressure, the rotary screw wins on airflow and on duty cycle. If your tools need 175 PSI, buy the piston. If the compressor will run more than about half of every hour, buy the rotary screw, because a piston pump is built to rest between cycles and a screw element is not.

What the 5 HP machines cover

The piston side runs from the AB5 two-stage on a 60 or 80 gallon vertical ASME tank through the AB5-2180VP with the higher flow T39 pump, the AB5-2180VQP Quiet Power at 66 dBA for shops where the compressor shares space with people, and the Ironman ABC5 with its fully cast iron C1 pump for the longest duty cycles in the band. On the rotary side the AS-5 is offered as a bare base mount, on a 71 gallon tank, or on that tank with an integrated refrigerated dryer, all at 63 dBA.

What the 7.5 HP machines cover

The AB7 two-stage pistons come on 80 gallon tanks in vertical or horizontal orientation, with Premium builds and a Quiet Power model at 69 dBA. The Ironman ABC7 splits into a 21 CFM C1 pump and a 24 CFM C2 pump, so two machines sharing a 7.5 HP badge differ by roughly three CFM depending on the casting. The AS-7.5 rotary screws are the broadest group here: base mount, 71 gallon tank mount, or 131 gallon tank mount, each with or without an integrated dryer, at 67 dBA.

Do not skip the air treatment

Every compressor in this band produces water, and that water reaches your tools, your cylinders and your paint unless something removes it. The tank mount models with an integrated dryer handle this on the skid. If you buy a base mount machine or a piston compressor, pair it with an ABAC COOL refrigerated dryer and inline filtration rated for the compressor's actual flow, not for its horsepower. Need a hand sizing the package? Tell us the tools and the hours and we will work it out with you.