Skip to content

Collection: ABAC AS Rotary Screw Air Compressors

ABAC AS Rotary Screw Air Compressors

The AS range is ABAC's answer to a shop that runs air all day. A rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of cycling, overheating and waiting to cool like a piston machine. This page covers the whole AS line from 3 to 30 HP, at 125, 150 or 175 PSI, from 11.3 CFM up to 114.1 CFM, with sound levels between 59 and 71 dBA.

Every size comes in more than one configuration. Base mount units have no receiver and are meant to be piped into a shop that already has a tank. Tank mount units arrive on a 71, 131 or 132 gallon ASME receiver, wired and ready to pipe. Any of those can be ordered with an integrated refrigerated dryer, which is the simplest way to keep water out of tools, lines and finishes without finding floor space for a separate cabinet. The S variants, such as the AS-10S and AS-20S, trade a little pressure for noticeably more airflow and a quieter cabinet at 65 to 67 dBA.

Sizing it: work out the CFM your tools actually draw at the pressure you run, then add headroom rather than buying to the number on the box. If the shop uses air in short bursts instead of continuously, a two-stage ABAC Ironman cast iron piston compressor may be the cheaper machine. See the whole brand in ABAC air compressors, or pair a base mount unit with an ABAC COOL refrigerated dryer and a receiver from our air compressor tanks range.