Champion Quick-Lock Overhead Hanging System - Wire Hangers, Cantilever Brackets and Beam Clamp

Most compressed air mains want to be overhead: out of the way of forklifts, above the machines they feed, and high enough that drops come down where the work is. Getting them up there is what this listing is for.

Three Champion parts cover the usual overhead problem. The wire hanging system suspends pipe from roof structure on 15 ft adjustable cables. The cantilever wall bracket carries a run out from a wall or column on strut channel, in 12 in and 18 in reaches. The beam clamp attaches a wire hanger or threaded rod to existing steel without drilling it.

Choose what you need from the dropdown above.

Model Selection Chart

Both wire hanger part numbers are listed at the same price in Champion's current book. The -1 suffix is the version Champion pairs with the 3/8 in insert teardrop hanging bracket. If your hangers have to land in a 3/8 in insert, order that one; if you are unsure what stud size the job needs, call us before you order, because these are no-return items.

How the Pieces Go Together

A typical overhead run is three parts stacked:

1. Something to hang from. A beam clamp onto existing steel, or an anchor into the deck. The beam clamp is the no-drilling option and at $7 list it is the cheapest part of the whole assembly.
2. Something to hang with. A wire hanger, cut to length on site, or threaded rod. The wire system is faster on a long run and it adjusts after the fact, which matters when the building is not level and your pipe needs to be.
3. Something to hold the pipe. A teardrop hanging bracket with a 3/8 in insert, in your tube size. Those are on the bracket listing and are ordered separately.

Where the run follows a wall or a line of columns instead, skip the hangers entirely: the cantilever bracket bolts to the structure and carries strut channel out to meet the pipe, and strut brackets then clamp the tube to the channel.

Shared Technical Specifications

Ideal Applications

Running a loop main at ceiling height around a shop, carrying a header down the centre of a bay above the machines, picking up an open-web steel roof without drilling it, bringing a run out past an obstruction on a wall, and any install where the floor has to stay clear and the pipe has to be high enough that forklifts and overhead doors never touch it.

Why Overhead, and Why Loop It

Two decisions set how well an air system works, and both are made before a single fitting goes on.

Get it overhead. Pipe at height is out of harm's way, drops land exactly where the work is, and the main can be pitched slightly toward a low point so condensate collects somewhere you can put a drain instead of somewhere you cannot.

Loop it. A main run as a loop feeds every point from two directions, which roughly doubles the usable flow of the same tube on Champion's own published figures, and it makes adding a machine later a non-event. Loops cost more hangers. They are still the right answer.

Take every drop off the top of an overhead main, or use a reduction outlet tee with water trap insert, which handles it inside the fitting.

Building a Complete Quick-Lock System

• Quick-Lock aluminum tubing, 14mm to 63mm
• Teardrop hanging brackets, strut brackets and wall brackets - you will need these alongside the hangers
• Equal tees and reduction outlet tees
• Outlet manifolds for the drop stations
• Tube cutter, deburring tools, marking gauge and wrench sets
• Condensate drains for the system low point

Ordering Notes

• All Quick-Lock products and accessories are NO CANCEL / NO RETURN, per Champion's current price list. Hanging hardware in particular is easy to order wrong, so talk the layout through with us first.
• Freight: freight collect from Huntersville, NC 28078 or Las Vegas, NV 89113.
• Shipping weights: Champion publishes no weight for the Quick-Lock accessory range, so no catalog weight is carried on these variants.
• Photography: Champion publishes no product photograph for the wire hanger, cantilever bracket or beam clamp, so this listing is deliberately shown without an image rather than with a stand-in from another part.