Skip to content

Collection: ABAC 120 Gallon Air Compressors

ABAC 120 Gallon Air Compressors

A 120 gallon receiver is where a shop stops thinking about the tank. It stores enough air that a 10 HP pump is not restarting between every trigger pull, and it gives a duplex pair somewhere to put the output when both heads run together. Every machine on this page is a two-stage ABAC piston compressor rated 175 PSI on a 120 gallon ASME tank, from 10 HP at 32 CFM up to 20 HP at 64 CFM.

The first decision is simplex or duplex. Six of these are single pump machines, all 10 HP and 32 CFM on a C2 cast iron pump, in horizontal or vertical layout and in standard or Full Feature build. The other eight are duplex: two pumps and two motors on one tank, so the pair can alternate, share a heavy load, or keep the shop running while one head is down for service. Duplex output runs from 32 CFM at 10 HP through 64 CFM at 20 HP. Twelve machines here are Ironman builds on C1 or C2 cast iron pumps; the two AB5 and AB7 duplexes sit in ABAC's Hybrid Pro line.

Eleven of the fourteen are horizontal, which suits a low ceiling or a machine set against a wall, and three vertical builds give back the floor area. If 120 gallons is more tank than the work needs, see ABAC 80 gallon air compressors, and if the shop runs air continuously rather than in bursts, compare ABAC AS rotary screw compressors. Browse the whole brand in ABAC air compressors, and pair any machine with an ABAC COOL refrigerated dryer to keep water out of the lines.