Skip to content

Collection: ABAC Hybrid Pro Air Compressors

ABAC Hybrid Pro Air Compressors

The Hybrid Pro range is where ABAC puts a lighter pump behind the same 175 PSI two-stage duty. The pump mixes aluminium and cast iron rather than running cast iron throughout, which takes weight and cost out of the machine while keeping the two-stage pressure a working shop needs. A 7.5 HP Hybrid Pro on an 80 gallon tank lands a long way under the equivalent Ironman, and for a shop that runs air in bursts rather than all day, that is the sensible trade.

The simplex machines cover 5 and 7.5 HP on 60 and 80 gallon ASME receivers, vertical or horizontal, with Premium Full Feature builds that add a magnetic starter and an automatic tank drain, and T39 pump options that lift output to 16.6 CFM at 5 HP and 22.2 CFM at 7.5 HP. The duplex pair two pumps and two motors on one 120 gallon horizontal receiver for 10 and 15 HP, so one pump can carry a quiet shift and both come online when demand spikes. The gas drive AB13-30GH puts a 13 HP Honda engine on a 30 gallon horizontal tank for job sites with no power at the wall.

Running air most of the day, or blasting? The fully cast iron pumps in the ABAC Ironman range shed heat better and tolerate longer duty cycles. See the whole brand in ABAC air compressors, the wider piston air compressors range, or step across to ABAC rotary screw air compressors for continuous duty. Pair any of these with an ABAC COOL refrigerated dryer to keep water out of the lines.