Featured Articles
Air Compressors for Tire and Auto Service Shops
Sizing shop air by bays running at once, CFM and tank targets for 2 to 5 bay shops, and the setup mistakes that make a big compressor feel small.
Read moreFeatured Articles
Compressed Air for Breweries: What You Actually Need
Compressed air for breweries has to be oil free and dry. The air quality spec, the equipment list, real CFM by application, and what auditors ask for.
Read more
Air Compressor Control Modes: Start/Stop, Load/Unload, Modulation, VSD
The four air compressor control modes compared: how each one behaves at part load, what it costs you at zero flow, and which one fits your demand pattern.
Read more
Compressed Air Pipe Materials: Iron, Copper, Stainless, Aluminum
Black iron, copper, stainless, or aluminum? Compare cost, install labor, corrosion, and pressure drop before you pipe your shop air.
Read more
Desiccant Types Compared: Alumina, Silica Gel, and Molecular Sieve
Not all desiccant beads are the same. Activated alumina, silica gel, and molecular sieve compared on dew point, capacity, heat tolerance, and cost.
Read more
Rotary Screw Airend Rebuild: Repair, Replace, or Buy New?
An airend rebuild runs about half the cost of a new one and buys 30,000 to 50,000 more hours. Where the break-even sits and when to walk away from the machine.
Read more
What Size Wire and Breaker Does an Air Compressor Need?
Air compressor wire and breaker size explained: why motor circuits use table values instead of the nameplate, the 125 and 250 percent rules, and a chart by horsepower.
Read more
Process Chillers for Compressed Air: When You Need One and How to Size It
What process chillers do for compressed air and cooling loads, water cooled vs air cooled, how to size one in tons, and when a chiller beats a dryer.
Read more
How to Winterize an Air Compressor Before It Freezes
Freezing condensate is what wrecks compressors in winter, not the cold itself. A shop checklist for drains, oil grade, dryers, and heat.
Read more
When to Replace Compressed Air Filter Elements
Filter elements are a 12 month consumable. Why the dP gauge lies to you, the real change schedule, and how to swap them cleanly.
Read more
Nitrogen Generators: Make Your Own N2 From Compressed Air
How a nitrogen generator turns compressed air into 95 to 99.999 percent N2, membrane vs PSA compared, purity by application, and the feed air it needs.
Read more
Parts of an Air Compressor: What Each One Does
A plain guide to the parts of an air compressor: motor, pump, tank, pressure switch, check valve, and the rest, and what each one does.
Read more
What Size Air Compressor for a Plasma Cutter?
How to size an air compressor for a plasma cutter, why CFM at 90 psi beats tank size, and why clean dry air saves your consumables.
Read more
