Champion Revolution Quiet Enclosed Air Compressor, 5 to 15 HP
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
BQR5 208-1
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Dimensions | |
|
1114.0 lb
|
|
A Revolution is an R-Series two stage piston compressor inside a 2 inch foam lined enclosure, running at 1800 RPM instead of the 3450 RPM a direct drive machine uses. Champion publishes the sound figures on both sides: the same pump and motor unenclosed measures 75 to 82 dBA depending on horsepower, and inside the Revolution cabinet it measures 62 to 68. That is the entire product. You get piston compressor economics, piston compressor rebuild parts and piston compressor duty cycle, in a package you can stand next to and hold a conversation.
Champion tests these to CAGI adopted ISO 2151, so the numbers below are comparable with the rotary screw figures published by other manufacturers. Eight configurations are built here, four base mount and four tank mounted, 5 through 15 HP. If you want the version with a refrigerated dryer already mounted and piped, that is the Revolution AirStation.
Model selection chart
| Model | Motor | Tank | Pump | Pump RPM | ACFM @ 175 PSIG | dBA | L x W x H (in) | Ship wt (lb) | Champion list | Our price |
|---|---|---|---|---|---|---|---|---|---|---|
| BQR5 | 5 HP | Base mount | R15 | 734 | 16.8 | 63 | 61 x 32 x 45 | 1114 | $14,870 | $6,982 |
| HQR5-8 | 5 HP | 80 gal horizontal | R15 | 734 | 16.8 | 63 | 70 x 32 x 64 | 1285 | $16,790 | $7,884 |
| BQR7F | 7.5 HP | Base mount | R15 | 990 | 22.4 | 65 | 61 x 32 x 45 | 1141 | $16,060 | $7,541 |
| HQR7F-8 | 7.5 HP | 80 gal horizontal | R15 | 990 | 22.4 | 65 | 70 x 32 x 64 | 1312 | $18,030 | $8,466 |
| BQR10 | 10 HP | Base mount | R30 | 720 | 33.5 | 62 | 68 x 33 x 50 | 1371 | $20,870 | $9,799 |
| HQR10-12 | 10 HP | 120 gal horizontal | R30 | 720 | 33.5 | 65 | 76 x 33 x 74 | 1647 | $23,430 | $11,001 |
| BQR15 | 15 HP | Base mount | R30 | 1035 | 46.6 | 65 | 68 x 33 x 50 | 1440 | $22,670 | $10,644 |
| HQR15F-12 | 15 HP | 120 gal horizontal | R30 | 1035 | 46.6 | 68 | 76 x 33 x 74 | 1716 | $25,630 | $12,034 |
Dimensions and sound levels come from Champion's Revolution brochure. Ship weights and list prices come from the August 2026 reciprocating price list. The brochure prints the 15 HP base mount as BQR15F where the price list prints BQR15; we have used the price list spelling on the SKU because that is what order entry takes, and we have asked Fulton Associates which is correct.
What base mount and tank mounted actually change
A base mount Revolution has no receiver. It is the enclosure, the pump, the motor and the controls on a skid, meant to feed an existing tank or a shop that already has plenty of storage. It is also the cheapest way into the family, and on the 10 HP it is the quietest configuration in the whole range at 62 dBA, because there is no tank skin to radiate noise.
A tank mounted Revolution is the same package bolted over an ASME coded horizontal receiver, 80 gallon on the 5 and 7.5 HP and 120 gallon on the 10 and 15. Three options only exist on tank models: the vinyl lined tank, the galvanized coated tank and the electric tank drain. Massachusetts code fittings are also tank only.
Shared technical specifications
- Two stage, splash lubricated R-Series pump. R-15 (two cylinder) on the 5 and 7.5 HP, R-30 (four cylinder) on the 10 and 15
- 175 PSIG rated, 80/20 duty cycle
- 1800 RPM motor, loadless starting, innovative belt tensioning system, enclosed belt guard
- NEMA 1 mounted control panel with hour meter, on/off switch, fault and power on lights, standard on every configuration
- Start/stop pressure switch control
- Integrated heavy duty bar and plate air cooled aftercooler, standard, not an adder
- Low oil level monitor and low oil stop control, standard
- Intake filter and silencer, air intake pre-filter, filter maintenance indicator, air pressure gauge, oil sight gauge
- Ball valve on the crankcase drain, so an oil change does not mean a drain plug and a pan
- Sound attenuating enclosure with 2 inch foam panels, bottom intake and bottom discharge, and a thermostatically controlled 1000 CFM fan
- Front and back panels remove for service, and Champion rates the package to run with the doors off for maintenance
- California code compliant receiver, standard at no charge on tank models
- ASME coded receiver on all tank mounted units
How quiet, in numbers
Champion publishes the unenclosed R-Series package sound level next to the Revolution figure for the same horsepower, which is unusually honest of them and makes the comparison easy.
| Motor | Unenclosed R-Series package | Revolution base mount | Revolution tank mounted |
|---|---|---|---|
| 5 HP | 75 dBA | 63 dBA | 63 dBA |
| 7.5 HP | 77 dBA | 65 dBA | 65 dBA |
| 10 HP | 78 dBA | 62 dBA | 65 dBA |
| 15 HP | 82 dBA | 65 dBA | 68 dBA |
Every 10 dBA is roughly a halving of perceived loudness, so a 15 HP Revolution at 68 dBA against 82 unenclosed is not a marginal improvement. It is the difference between a machine that needs its own room and one that does not. Champion's argument, and we think it holds, is that the enclosure costs less than building the room.
Voltage
Voltage does not change the price on any Revolution. The 5 and 7.5 HP are offered single phase at 208 or 230 volts and three phase at 208, 230, 460 or 575. The 10 and 15 HP are three phase only, and the book prints no single phase row for them at all. Pick the voltage that matches your service; the list price is identical across all of them. Champion asks that the voltage and phase be confirmed on the order, and we confirm it with you before anything is released.
Ideal applications
Dental and medical offices, veterinary practices, automotive and body shops with a customer waiting area, equipment rooms that share a wall with an office, schools and training workshops, lab and test benches, and any plant where the compressor sits in the working space rather than in a mechanical room. It is also a reasonable answer when a 10 or 15 HP rotary screw has been quoted for a shop whose air demand is genuinely intermittent, because a screw that spends its life unloaded is an expensive way to make 30 CFM.
Where the price list contradicts itself
We build and publish exactly what Champion prints, and we say so when what Champion prints does not add up. Three things on these pages:
- Massachusetts code fittings on the HQR5-8. Page 52 prints $163 where every other column in the family, including the HQR5-8 AirStation on page 57, prints $200. Built at $163 because that is the printed figure for this configuration.
- The 15 HP starter block is mislabelled. Page 55 prints "Control Panel - NEMA 4" as standard and "Control Panel - NEMA 4" again as not available, where pages 52 to 54 print NEMA 1 standard and NEMA 4 not available. The page's own footnote says NEMA 4 panels and electrics are not yet available for the Revolution package, so the standard panel on the 15 HP is a NEMA 1 like every other model and the label is a typo.
- No NEMA 4 anything, yet. The NEMA 4 control panel and the NEMA 4 electrical and pressure switch print N/A on every Revolution column. If your installation needs a washdown rated enclosure, this family cannot do it today and we will quote you an R-Series package instead.
Options, service and parts
Every priced factory option for this family, and for the AirStation, is listed on one page: Champion Revolution Factory-Installed Options and Adders. Factory installed means it goes on the order, not on a shelf; these are not field retrofit kits.
Three options print as standard at no charge on every column and are not sold separately: the air cooled aftercooler, the low oil stop control and the California code compliant receiver. Vibration isolators print N/A throughout, and Champion's note explains why: isolators are already fitted under the pump and motor base, so a second set under the tank is neither needed nor recommended.
When the pump eventually needs replacing rather than rebuilding, the Revolution uses the same R-15 and R-30 castings sold on our R-Series two stage bare pump page. The bare pump bore and stroke are 4.63 and 2.5 inch bores on a 3 inch stroke, 2 quarts of oil on the R-15 and 4 on the R-30.
Freight is prepaid by Champion on compressor orders over 400 pounds, which every configuration in this table exceeds.
Warranty
One year parts and labour on package components and three years on the compressor pump, standard, per Champion form BU-32. The Premium Extended Warranty Kit has to be bought at the same time as the compressor and doubles the pump cover to six years while taking the package to 24 months. It also includes the oil and filters for six years of annual maintenance, and it requires that approved Champion lubricants be used. It is on the options page, priced by horsepower band.
Why buy from Warthog
We are an authorized Champion distributor and we order through Champion's own system, so what you see here is a real order and a real factory lead time, not a drop ship gamble. We price off the current August 2026 Champion list rather than a stale sheet, we publish the ship weight and the dimensions before you ask, and we will tell you when a cheaper Champion model does the same job. If the shop is noisy anyway and nobody works near the compressor, the standard R-Series package does the same air for thousands less, and we would rather sell you that than have you pay for an enclosure you cannot hear the benefit of.
Questions we get
Is 63 dBA really quiet enough to put this in an office equipment room? It is about the level of normal conversation at a few feet. People do put them in offices and dental surgeries. What usually catches people out is not the compressor noise but the discharge air and the drain, so plan the piping and the condensate line with the same care.
Can I add the enclosure to a Revolution later, or take it off? No, and you would not want to. The intake and discharge path, the fan and the cooling design are all part of the cabinet. Running it with the panels off for maintenance is fine and Champion says so; running it that way permanently is not.
Why is the 10 HP base mount quieter than the 5 HP? Because the R-30 pump turns at 720 RPM where the R-15 in the 5 HP turns at 734, and the 10 HP package has more cabinet volume around it. Champion publishes 62 dBA for the BQR10 and 63 for the BQR5. It looks wrong and it is not.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.