Champion Revolution AirStation Quiet Enclosed Air Compressor with Mounted Dryer
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
HQR5-8-AS 208-1
|
|
|
|
|
|
|
|
|
|
|
Gallons |
|
|
|
|
|
|
|
| Dimensions | |
|
1401.0 lb
|
|
An AirStation is a Revolution with the refrigerated dryer already on it. Same enclosure, same R-Series pump, same 1800 RPM motor, same receiver, plus a mounted Champion X Series dryer, an X Series pre-filter and a three way bypass valve, piped and wired at the factory and shipped as one skid. You buy it when the air has to be dry and you do not want a second machine, a second electrical drop and a week of pipefitting.
The dryer is sized to the package, not sold as a generic add on. Champion's note on the page is that the dryer model will accommodate the CFM of the package it is fitted to, and the model changes with horsepower.
Model selection chart
| Model | Motor | Tank | Mounted dryer | ACFM @ 175 PSIG | dBA | L x W x H (in) | Ship wt (lb) | Champion list | Our price |
|---|---|---|---|---|---|---|---|---|---|
| HQR5-8 AirStation | 5 HP | 80 gal | XCNC25 | 16.8 | 63 | 71 x 32 x 64 | 1401 | $22,450 | $10,541 |
| HQR10-12 AirStation | 10 HP | 120 gal | XCNC42 | 33.5 | 65 | 93 x 33 x 71 | 1764 | $31,400 | $14,743 |
| HQR15F-12 AirStation | 15 HP | 120 gal | XCNC64 | 46.6 | 68 | 93 x 33 x 71 | 1833 | $34,350 | $16,128 |
The 7.5 HP AirStation is not on this page, and here is why
Champion prints a full specification column for the HQR7F-8 AirStation on page 57 of the August 2026 price list: 80 gallon tank, XCNC32 dryer, 22.4 ACFM, 1,412 lb ship weight, the whole option grid. Where the list price should be, the page prints #N/A, which is a spreadsheet error value rather than a price. We do not invent list prices, so the 7.5 HP AirStation is not built as a buyable configuration. We have asked Fulton Associates for the correct figure. If you want one, ask and we will quote it; nothing is wrong with the machine, only with the cell.
What the mounted dryer gets you
A compressor makes water. On a 10 HP machine in a humid shop that can be several gallons a day, and it ends up in your tools, your paint and your controls. The X Series refrigerated dryer on an AirStation takes the compressed air down to a pressure dew point in the high 30s Fahrenheit, which is dry enough for everything short of outdoor piping in winter and instrument air. The pre-filter protects the dryer from oil carryover, and the three way bypass means you can isolate the dryer for service without shutting the compressor down.
What it does not get you: desiccant class dryness. If you are running air to an outdoor line that freezes, or feeding an analyser or a breathing air system, you need a desiccant dryer downstream and the AirStation dryer becomes the pre-dryer for it.
Shared technical specifications
- Everything in the standard Revolution package, including the NEMA 1 mounted control panel, the integrated aftercooler and the low oil stop control
- Mounted Champion X Series refrigerated dryer, sized per model: XCNC25 on the 5 HP, XCNC42 on the 10, XCNC64 on the 15
- X Series pre-filter, mounted
- Three way bypass valve, so the dryer can be isolated without taking the compressor offline
- ASME coded horizontal receiver, 80 gallon on the 5 HP and 120 gallon on the 10 and 15
- 175 PSIG rated, 80/20 duty cycle, 1800 RPM motor
- Sound attenuating enclosure, 2 inch foam panels, bottom intake and discharge
An AirStation is longer and heavier than the equivalent plain Revolution, and the 10 and 15 HP grow more than the 5 does: 93 inches long against 76, and roughly 120 lb heavier. Measure the doorway before you order.
Voltage
The 5 HP is available single phase at 208 or 230 volts and three phase at 208, 230, 460 or 575. The 10 and 15 HP are three phase only. Voltage does not change the price. Champion asks that voltage and phase be confirmed at order entry and we confirm it with you first.
Where the price list contradicts itself
Page 57 prices the option grid differently from pages 52 to 55 for machines that are, apart from the dryer, the same thing. We build what is printed for the configuration you are buying, and we would rather show you the conflict than quietly pick a side.
- Tank coatings on the 10 HP AirStation. Page 57 prices the vinyl lined tank at $2,340 and the galvanized at $2,700 on the HQR10-12 AirStation. Those are the 80 gallon figures. The same 120 gallon tank on page 54, without the dryer, is $2,880 and $3,950. The 7.5 HP AirStation column on page 57 has the opposite problem: it carries the 120 gallon figures on an 80 gallon tank.
- TEFC motor on the 10 HP AirStation. $940 on page 57 against $1,130 on page 54 for the same 10 HP three phase motor.
- Food grade oil on the 10 HP AirStation. $30 on page 57 against $50 on page 54, for the same R-30 pump holding the same 4 quarts.
All four of those point the same way: the 10 HP column on the AirStation page carries the 7.5 HP column's option prices. They are reported to Fulton Associates. Note that every one of them is printed lower than the pattern implies, so nobody is overcharged by us following the book.
Options, service and parts
Priced factory options for the AirStation are on the shared Revolution options page, with the AirStation columns marked separately where they differ. The electric tank drain is priced on every AirStation column at $400 and is worth having on a dryer package, because the dryer only works on air that has already dropped its bulk water in the tank.
The plain enclosed version without the dryer is here: Champion Revolution quiet enclosed air compressor. Replacement pumps are on the R-Series bare pump page.
No standalone price is published anywhere in the reciprocating book for the XCNC25, XCNC42 or XCNC64 dryers, so a replacement dryer for an existing AirStation has to be quoted. Ask us and we will get it.
Warranty
One year parts and labour on package components, three years on the compressor pump, per Champion form BU-32. The Premium Extended Warranty Kit, bought with the machine, takes the pump to six years and the package to 24 months and includes six years of oil and filters. It is on the options page.
Why buy from Warthog
We sell the dryer package and we will also tell you when you do not need it. If your shop already has a dryer with capacity to spare, buying a plain Revolution and piping it in is cheaper and gives you one less thing mounted on a vibrating skid. If you have no dryer, the AirStation is almost always cheaper than a compressor plus a standalone dryer plus the install labour, and it arrives as one piece of freight.
Questions we get
Does the mounted dryer run all the time? The X Series dryers are non cycling, so yes, the refrigeration circuit runs whenever the dryer is powered. That is a few hundred watts, and it is the trade for a stable dew point.
Can I add a dryer to a plain Revolution later? You can put a dryer downstream, which is a perfectly good answer. You cannot convert a Revolution into an AirStation, because the dryer, pre-filter and bypass are mounted on the skid at the factory and the package dimensions change.
Why is the 15 HP AirStation the same length as the 10 HP? Both are 93 x 33 x 71 inches. Same receiver, same cabinet, bigger dryer in the same footprint. Only the ship weight moves, 1,764 lb against 1,833.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.