Champion Revolution Factory-Installed Options and Adders
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
CHREV-OPT-VLT-A
|
|
These are factory installed options for the Champion Revolution and Revolution AirStation. Factory installed means exactly that: the option is added to the build at Sedalia before the machine ships. None of them is a field kit, and most of them cannot sensibly be added later, so they belong on the purchase order with the compressor rather than on a shelf.
Every priced cell printed on pages 52 to 55 and page 57 of the August 2026 Champion reciprocating price list is here, 77 cells in total, grouped into 18 line items where the price is the same across several models. Nothing printed with a price has been left out, and nothing here covers a model the book does not price it for.
The full adder table
| Option | Fits | Champion list | Our price | SKU |
|---|---|---|---|---|
| Vinyl (epoxy) Lined Tank | HQR5-8, HQR7F-8, HQR5-8-AS, HQR10-12-AS | $2,340 | $1,099 | CHREV-OPT-VLT-A |
| Vinyl (epoxy) Lined Tank | HQR10-12, HQR15F-12, HQR15F-12-AS | $2,880 | $1,353 | CHREV-OPT-VLT-B |
| Galvanized Coated Tank | HQR5-8, HQR7F-8, HQR5-8-AS, HQR10-12-AS | $2,700 | $1,268 | CHREV-OPT-GCT-A |
| Galvanized Coated Tank | HQR10-12, HQR15F-12, HQR15F-12-AS | $3,950 | $1,855 | CHREV-OPT-GCT-B |
| Mass. Code Fittings | HQR5-8 | $163 | $77 | CHREV-OPT-MCF-A |
| Mass. Code Fittings | HQR7F-8, HQR10-12, HQR15F-12, HQR5-8-AS, HQR10-12-AS, HQR15F-12-AS | $200 | $94 | CHREV-OPT-MCF-B |
| TEFC Motor - 1PH | BQR5, HQR5-8, HQR5-8-AS | $1,260 | $592 | CHREV-OPT-TEFC1-A |
| TEFC Motor - 1PH | BQR7F, HQR7F-8 | $2,350 | $1,104 | CHREV-OPT-TEFC1-B |
| TEFC Motor - 3PH | BQR5, HQR5-8, HQR5-8-AS | $750 | $353 | CHREV-OPT-TEFC3-A |
| TEFC Motor - 3PH | BQR7F, HQR7F-8, HQR10-12-AS | $940 | $442 | CHREV-OPT-TEFC3-B |
| TEFC Motor - 3PH | BQR10, HQR10-12 | $1,130 | $531 | CHREV-OPT-TEFC3-C |
| TEFC Motor - 3PH | BQR15, HQR15F-12, HQR15F-12-AS | $1,310 | $616 | CHREV-OPT-TEFC3-D |
| Food Grade Oil | BQR5, HQR5-8, BQR7F, HQR7F-8, HQR5-8-AS, HQR10-12-AS | $30 | $15 | CHREV-OPT-FGO-A |
| Food Grade Oil | BQR10, HQR10-12, BQR15, HQR15F-12, HQR15F-12-AS | $50 | $24 | CHREV-OPT-FGO-B |
| Electric Tank Drain | HQR5-8, HQR7F-8, HQR10-12, HQR15F-12, HQR5-8-AS, HQR10-12-AS, HQR15F-12-AS | $400 | $188 | CHREV-OPT-ETD-A |
| High Temp Switch | BQR5, HQR5-8, BQR7F, HQR7F-8, BQR10, HQR10-12, BQR15, HQR15F-12, HQR5-8-AS, HQR10-12-AS, HQR15F-12-AS | $520 | $245 | CHREV-OPT-HTS-A |
| Premium Ext Warranty Kit | BQR5, HQR5-8, BQR7F, HQR7F-8, HQR5-8-AS | $2,690 | $1,969 | CHREV-OPT-PEW-A |
| Premium Ext Warranty Kit | BQR10, HQR10-12, BQR15, HQR15F-12, HQR10-12-AS, HQR15F-12-AS | $4,380 | $3,205 | CHREV-OPT-PEW-B |
Models ending in -AS are the AirStation versions. Champion prints the same model number for a Revolution and its AirStation twin, which is a real problem at order entry; we add the suffix so the two can be told apart.
What each one is for
Vinyl (epoxy) lined tank and galvanized coated tank. Both fight rust from the inside. A lined tank is the normal answer in a humid shop or anywhere the drain gets neglected; galvanized costs more and lasts longer in genuinely wet service. If the machine is an AirStation with a dryer and an electric drain, you can reasonably skip both. If it is a plain tank model with a manual drain that nobody will pull, buy one.
Massachusetts code fittings. Buy it if the machine is going to Massachusetts, and not otherwise. It is tank models only.
TEFC motor, single and three phase. The standard motor is open drip proof. TEFC is the right call in a woodshop, a feed mill, a body shop with sanding dust, or anywhere the air carries anything. Inside a Revolution cabinet the motor is already better protected than an open package, so this matters less here than it does on a bare R-Series unit, but dust that gets through the intake still gets to the motor.
Food grade oil. Thirty or fifty dollars of list to have the machine factory filled with food grade lubricant. If you are in food, beverage or packaging and your air touches product, this is the cheapest compliance decision you will make all year. Note that it changes what you must keep topping it up with.
Electric tank drain. Tank models and AirStations only. A timed solenoid drain instead of a manual valve. The single most commonly skipped $188 on this page and the single most common cause of a rusted tank and water in the tools.
High temp switch. Shuts the machine down on high discharge temperature. Worth it on any unattended installation, and worth it on every enclosed machine, because an enclosure that loses its cooling fan gets hot faster than an open package does.
Premium extended warranty kit. Doubles the pump warranty from three years to six and takes the package from twelve months to 24, and includes the oil and filters for six years of annual maintenance. It has to be bought with the compressor; it cannot be added afterwards. It also obliges you to use approved Champion lubricants for the extended period. On a machine that will run every day for a decade this is good value, and on a machine that runs an hour a week it is not.
Four places the book is internally inconsistent
These are built as printed, because inventing a price is worse than publishing an odd one. All four are reported to Fulton Associates.
- Massachusetts code fittings cost $163 on the HQR5-8 and $200 on everything else, including the HQR5-8 AirStation, which is the same tank with a dryer bolted to it. That is why there are two Massachusetts line items here.
- The 10 HP AirStation carries the 7.5 HP option prices. Vinyl lined tank $2,340 and galvanized $2,700 are the 80 gallon figures, printed against a 120 gallon tank. The plain HQR10-12 on page 54 prints $2,880 and $3,950 for the same tank.
- TEFC three phase is $940 on the 10 HP AirStation and $1,130 on the plain 10 HP, same motor, same machine underneath.
- Food grade oil is $30 on the 10 HP AirStation and $50 on the plain 10 HP, same R-30 pump, same oil capacity.
Every one of those four is printed lower on the AirStation page, so following the book costs us margin rather than costing you money.
Standard at no charge, so not sold here
Four things print as Std. on every Revolution column and are included in the package price: the NEMA 1 mounted control panel with hour meter and on/off switch, the integrated air cooled aftercooler, the low oil stop control, and the California code compliant receiver on tank models. On AirStations the mounted dryer is standard too. Do not let anyone quote you for these as extras.
Not available on this family at all
The NEMA 4 control panel, the NEMA 4 electrical and pressure switch, and the ship loose panel or starter all print N/A on every column. Champion's footnote is explicit: NEMA 4 panels and electrics are not yet available for the Revolution package. Vibration isolators also print N/A, and that one is deliberate rather than a gap, because isolators are already fitted beneath the pump and motor base inside the cabinet.
There are no deducts anywhere in this family. Unlike the R-Series and PL-Series pages, there is no ship loose controller credit and no less motor credit; there is nothing you can take off a Revolution to save money.
Ordering notes
The configurator for the whole family is REV5-15A, and the stock variant suffix is, in the book's own words, a generic numeric suffix not specific to build detail. That means order entry cannot by itself distinguish a BQR5 from an HQR15F-12, let alone a tank model from its AirStation twin. We pin the model number and every option code on each order rather than relying on the configurator.
No weight is published for any of these adders, so they all carry zero shipping weight here. They ship on the compressor, not separately. Champion pays freight on compressor orders over 400 pounds.
Where these go
Champion Revolution quiet enclosed air compressor, 5 to 15 HP and Champion Revolution AirStation with mounted dryer. For the R-Series machines that share these pumps, see the R-Series bare pump options page, where several of the same options appear at a different price because bare pumps are discounted on a different Champion table.
Two questions worth answering
Can I add any of these to a machine I already own? The high temp switch and the electric tank drain are the only two with a realistic field equivalent, and neither is the same part. Champion does not publish field retrofit numbers or prices for any of them in this book. We can quote through Champion service parts.
Why does the same option cost different money on different pages of your site? Because Champion discounts packages and bare pumps on different tables, and an option follows the equipment it is installed on. A low oil stop control on a Revolution and the same part on a bare pump genuinely do land at different prices. We would rather show you the real number for the machine you are buying than average them.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.