Airca Swivel Extension Hose by Prevost
| Specifications (As Configured) | |
|---|---|
|
Prevost
|
|
|
RAL AISW3835
|
|
Prevost Airca Extension Hose, 3/8 Inch, with a prevoS1 Swivel Safety Coupler
Airca is Prevost's oil resistant rubber air hose, and this is the factory built extension version: 3/8 inch hose, coupler already fitted, ear clamps crimped and protectors on. It is the general shop hose, the one that goes on a reel drop or runs out across a bay and gets stepped on.
Oil resistant matters more than people expect. A lubricated tool throws a fine mist back down the line, and on a hose cover that is not rated for it that mist softens the rubber over a couple of years until the cover blisters. Airca is built to take it.
The prevoS1 coupler is Prevost's one push safety design. Pressing the button vents the hose downstream of the coupler before the plug is released, so the hose does not whip and the plug does not fire back at whoever is holding it. Prevost rates the system at 29 to 174 psi; the 29 psi floor is what the venting stage needs to work, not a minimum for the tool.
Why the swivel version
The coupler on this build rotates. That sounds minor until you watch someone work a die grinder or a paint gun through a full arc: the hose winds up, the wind up fights the operator, and the twist is what eventually kills the hose and backs the coupler loose. A swivel takes the rotation at the fitting instead of in the hose. If you do not need it, the fixed coupler version is the cheaper build.
Pick the profile to match your plugs
These three profiles are not interchangeable, so order the one your shop already runs. Industrial is the Milton style most US shops default to. Automotive is the Truflate style common on older equipment and in tire work. High Flow is Prevost's large bore profile and is the one to pick if the tool at the end is a sander, a big impact or anything that runs continuously, because on the other two the coupler passage necks down to 1/4 inch. Matching plugs are on the Industrial plug, Automotive plug and High Flow plug pages.
Technical specifications
- Hose inside diameter: 3/8 inch
- Operating pressure: 29 to 174 psi, maximum 174 psi
- Temperature: 5 deg. F to 158 deg. F
- Assembled at the factory with ear clamps and coupler protectors fitted
- Coupler passage: 1/4 inch on the Industrial and Automotive builds, 3/8 inch on the High Flow build
An extension, not a supply hose
This is the distinction that catches people out. A RAL extension carries a coupler on one end and a plug on the other, so it drops into a line you already have: unplug the tool from the wall coupler, plug the extension in, plug the tool into the far end, and you have another 35 or 50 feet. It does not thread onto anything. If what you actually need is a hose that screws onto a threaded outlet, that is the ESTO assembly, which ends in a male NPT fitting instead of a plug.
If you would rather hang the hose off a reel than coil it, the DMO series reel and the DRFB safety retraction reel both ship with hose fitted. Loose couplers and plugs are in air hose quick couplers, and the drops they hang from are in Prevost aluminum air pipe.
Full RAL range
Prevost lists four lengths in this family. The 35 and 50 foot builds are stocked as buyable options above. The 25 and 100 foot builds are being discontinued at the end of 2026, so we are not listing them for sale, but we can still order them while Prevost has them. Chat or call if you need one.
| Part number | Coupler profile | Hose ID | Length | Status |
|---|---|---|---|---|
| RAL AISW3825 | Industrial (Milton) | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL AISW3835 | Industrial (Milton) | 3/8 inch | 35 ft | Current |
| RAL AISW3850 | Industrial (Milton) | 3/8 inch | 50 ft | Current |
| RAL AISW38100 | Industrial (Milton) | 3/8 inch | 100 ft | Discontinued after 2026 |
| RAL AESW3825 | High Flow | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL AESW3835 | High Flow | 3/8 inch | 35 ft | Current |
| RAL AESW3850 | High Flow | 3/8 inch | 50 ft | Current |
| RAL AESW38100 | High Flow | 3/8 inch | 100 ft | Discontinued after 2026 |
| RAL AUSW3825 | Automotive (Truflate) | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL AUSW3835 | Automotive (Truflate) | 3/8 inch | 35 ft | Current |
| RAL AUSW3850 | Automotive (Truflate) | 3/8 inch | 50 ft | Current |
| RAL AUSW38100 | Automotive (Truflate) | 3/8 inch | 100 ft | Discontinued after 2026 |
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
