Some filters could not be applied and were reset.
-
Sale ABAC AB5-2180V4FF 5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 14.6 CFM, 230V Single-Phase $2,746.00 Regular price $3,432.00 -
Sale ABAC AB5-2180VPFF 5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 16.6 CFM T39 Pump $3,323.00 Regular price $4,154.00Add to cart -
Sale ABAC ABC5-2180VFFS 5 HP Two-Stage Ironman Air Compressor - 80 Gallon Vertical Full Feature, 175 PSI, 16 CFM C1 Cast Iron Pump $3,651.00 Regular price $4,564.00Add to cart -
Sale ABAC ABC7-2180VFF 7.5 HP Two-Stage Ironman Air Compressor - 80 Gallon Vertical Full Feature, 175 PSI, 21 CFM C1 Cast Iron Pump $3,786.00 Regular price $4,733.00Add to cart -
Sale ABAC AB7-2180VFF 7.5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 22.2 CFM T39 Pump $3,846.00 Regular price $4,807.00Add to cart -
Sale ABAC AB7-2180HFF 7.5 HP Two-Stage Air Compressor - 80 Gallon Horizontal Premium, 175 PSI, 22.2 CFM T39 Pump $3,846.00 Regular price $4,807.00Add to cart -
Sale ABAC ABC7-2180V2FF 7.5 HP Two-Stage Ironman Air Compressor - 80 Gallon Vertical Full Feature, 175 PSI, 24 CFM C2 Cast Iron Pump $4,572.00 Regular price $5,715.00Add to cart -
Sale ABAC ABC10-23120HFF 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Horizontal Full Feature, 175 PSI, 32 CFM C2 Cast Iron Pump $5,324.00 Regular price $6,655.00Add to cart -
Sale ABAC ABC10-23120VFF 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Vertical Full Feature, 175 PSI, 32 CFM C2 Cast Iron Pump $5,649.00 Regular price $7,061.00Add to cart
ABAC Full Feature (FF) air compressors are the protected builds of the stationary piston range. Where a standard machine gives you the pump, motor and ASME receiver, the Full Feature package adds the parts that keep the compressor looking after itself between shifts: an automatic tank drain so condensate never sits in the receiver, an aftercooler that drops discharge temperature and knocks moisture out before it reaches your air lines, and low oil and high temperature protection that shuts the machine down before damage happens rather than after.
That matters most where a compressor runs unattended or where nobody is checking a drain valve every morning. Body shops, production cells, machine shops and any installation where the compressor sits in a back room are the usual buyers. The Full Feature premium is small next to a seized pump or a tank that rusted from the inside out.
What is in this collection
Both ABAC pump platforms are represented. The Hybrid Pro FF machines use the aluminum and cast iron T39 or PAT 49 pump and run 14.6 to 22.2 CFM at 175 PSI on 80 gallon vertical and horizontal tanks. The Ironman FF machines use the fully cast iron C1 and C2 pumps and run 16 to 32 CFM at 175 PSI on 80 and 120 gallon tanks, in single phase 230V through three phase 575V. Every machine here is two-stage and belt driven on an ASME receiver.
Choosing a Full Feature machine
Size on CFM first, against the air tools that will run at the same time, then decide pump construction. The hybrid pump is lighter and the better value where duty cycles are moderate; the cast iron Ironman pump sheds heat better and is what to buy if the compressor runs most of the day under load. Confirm the voltage and phase your panel actually supplies before ordering, because the FF models span 230V single phase to 575V three phase.
See the full ABAC piston air compressor range, the rest of the ABAC lineup, or add a refrigerated air dryer downstream when the work calls for genuinely dry air.








