Skip to content

Collection: ABAC 10 to 15 HP Air Compressors

ABAC 10 to 15 HP Air Compressors

Ten to fifteen horsepower is the band where compressed air stops being a tool supply and becomes a utility. It covers the multi bay collision centre, the CNC shop running a machine and a blow off station at the same time, the production line with cylinders and actuators, and any plant that cannot send people home because the compressor is down. ABAC covers the band from both directions: AS series rotary screws for continuous duty, and two-stage piston machines for higher pressure and intermittent load.

What the 10 HP machines cover

On the rotary side the AS-10 delivers 36.4 CFM at 125 PSI or 34.1 CFM at 150 PSI at 69 dBA, available as a bare base mount or on a 71 or 131 gallon ASME receiver, each with or without an integrated refrigerated dryer. The quieter AS-10S runs 65 dBA and adds a 175 PSI setting, delivering 39.8 CFM at 125 PSI, 35.6 CFM at 150 PSI and 29.9 CFM at 175 PSI. On the piston side the Ironman ABC10 runs a fully cast iron C2 pump for 32 CFM at 175 PSI on a 120 gallon horizontal or vertical tank, with Full Feature builds that add a magnetic starter and an automatic tank drain. The 10 HP duplex machines pair two 5 HP pumps on one 120 gallon horizontal receiver.

What the 15 HP machines cover

The AS-15 rotary screws deliver 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM at 175 PSI at 69 dBA, as a base mount or on a 131 gallon tank with an optional integrated dryer. The 15 HP duplex pistons pair two 7.5 HP pumps on a 120 gallon horizontal tank for 42 to 52 CFM at 175 PSI depending on whether the machine carries C1 or C2 castings.

Rotary screw, piston or duplex

Three answers at the same horsepower, and the load profile decides. A rotary screw is rated for 100 percent duty and holds its rated flow all day, which is what a production floor needs. A two-stage piston reaches 175 PSI and costs less to buy, but it banks air in a large tank and rests, so it suits intermittent draw. A duplex gives something neither single machine does: two pumps and two motors on one receiver, so light demand runs one side, peaks bring both on, and a pump can come down for service without stopping the shop. Size on the CFM your tools actually draw at once, add roughly a third for leaks and growth, then choose the configuration on duty cycle rather than on price.

Treat the air

A compressor in this band pushes a lot of water into the lines. Tank mount models with an integrated dryer handle it on the skid. For a base mount or piston machine, pair it with an ABAC COOL refrigerated dryer and inline filtration sized to the compressor's actual flow, not to its horsepower. See the rest of the range in ABAC air compressors, or step up to 20 to 30 HP if the load is larger than this band covers.