Stoflex Swivel Extension Hose by Prevost
| Specifications (As Configured) | |
|---|---|
|
Prevost
|
|
|
RAL SISW3835
|
|
Prevost Stoflex Extension Hose, 3/8 Inch, with a prevoS1 Swivel Safety Coupler
Stoflex is the green non static rubber hose Prevost builds for paint work. This listing is the ready made extension: a length of 3/8 inch Stoflex with the coupler already crimped on, ear clamps set and the rubber protector fitted, so there is nothing to assemble and nothing to get wrong.
Static is the reason a booth buys this hose rather than a cheaper one. Air moving through ordinary rubber builds a charge, the charge pulls dust and overspray onto the hose, and the hose carries it to the next panel. Stoflex bleeds the charge off. The smooth cover also wipes down, which matters when the hose has been dragged across a floor between colors.
The prevoS1 coupler is Prevost's one push safety design. Pressing the button vents the hose downstream of the coupler before the plug is released, so the hose does not whip and the plug does not fire back at whoever is holding it. Prevost rates the system at 29 to 174 psi; the 29 psi floor is what the venting stage needs to work, not a minimum for the tool.
Why the swivel version
The coupler on this build rotates. That sounds minor until you watch someone work a die grinder or a paint gun through a full arc: the hose winds up, the wind up fights the operator, and the twist is what eventually kills the hose and backs the coupler loose. A swivel takes the rotation at the fitting instead of in the hose. If you do not need it, the fixed coupler version is the cheaper build.
Pick the profile to match your plugs
These three profiles are not interchangeable, so order the one your shop already runs. Industrial is the Milton style most US shops default to. Automotive is the Truflate style common on older equipment and in tire work. High Flow is Prevost's large bore profile and is the one to pick if the tool at the end is a sander, a big impact or anything that runs continuously, because on the other two the coupler passage necks down to 1/4 inch. Matching plugs are on the Industrial plug, Automotive plug and High Flow plug pages.
Technical specifications
- Hose inside diameter: 3/8 inch
- Operating pressure: 29 to 174 psi, maximum 174 psi
- Temperature: 5 deg. F to 158 deg. F
- Assembled at the factory with ear clamps and coupler protectors fitted
- Coupler passage: 1/4 inch on the Industrial and Automotive builds, 3/8 inch on the High Flow build
An extension, not a supply hose
This is the distinction that catches people out. A RAL extension carries a coupler on one end and a plug on the other, so it drops into a line you already have: unplug the tool from the wall coupler, plug the extension in, plug the tool into the far end, and you have another 35 or 50 feet. It does not thread onto anything. If what you actually need is a hose that screws onto a threaded outlet, that is the ESTO assembly, which ends in a male NPT fitting instead of a plug.
Bulk hose by the foot is on the Stoflex non static paint hose page, and the short drop between a hard line and a tool is the Stoflex whip hose. Loose couplers and plugs are in air hose quick couplers, and the drops they hang from are in Prevost aluminum air pipe.
Full RAL range
Prevost lists four lengths in this family. The 35 and 50 foot builds are stocked as buyable options above. The 25 and 100 foot builds are being discontinued at the end of 2026, so we are not listing them for sale, but we can still order them while Prevost has them. Chat or call if you need one.
| Part number | Coupler profile | Hose ID | Length | Status |
|---|---|---|---|---|
| RAL SISW3825 | Industrial (Milton) | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL SISW3835 | Industrial (Milton) | 3/8 inch | 35 ft | Current |
| RAL SISW3850 | Industrial (Milton) | 3/8 inch | 50 ft | Current |
| RAL SISW38100 | Industrial (Milton) | 3/8 inch | 100 ft | Discontinued after 2026 |
| RAL SESW3825 | High Flow | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL SESW3835 | High Flow | 3/8 inch | 35 ft | Current |
| RAL SESW3850 | High Flow | 3/8 inch | 50 ft | Current |
| RAL SESW38100 | High Flow | 3/8 inch | 100 ft | Discontinued after 2026 |
| RAL SUSW3825 | Automotive (Truflate) | 3/8 inch | 25 ft | Discontinued after 2026 |
| RAL SUSW3835 | Automotive (Truflate) | 3/8 inch | 35 ft | Current |
| RAL SUSW3850 | Automotive (Truflate) | 3/8 inch | 50 ft | Current |
| RAL SUSW38100 | Automotive (Truflate) | 3/8 inch | 100 ft | Discontinued after 2026 |
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
