Champion Big-Lock Pipe Support - Hanger Bracket and Cantilever Wall Bracket (73mm to 220mm)

Aluminum pipe is light, which is most of why people choose it, and it still has to be held up properly. Champion Big-Lock pipe supports come in two forms: a steel hanger bracket that drops the pipe from threaded rod, and a cantilever wall bracket that carries it off a wall or a column with a pipe strap and bolts.

Choose your size and bracket type from the dropdowns above.

Model Selection Chart

Two Very Different Parts, and Two Very Different Prices

The hanger bracket is $8 to $23 at list. It is a pipe clamp with a threaded insert: you run threaded rod down from the roof steel or a strut channel, and the bracket hangs the pipe on it. You will buy a lot of them.

The cantilever wall bracket is $282 to $344 at list. It is a structural arm that carries the pipe out from a wall or a column with no overhead support at all, supplied with its pipe strap and bolts. You will buy a few, in the places where there is nothing above to hang from.

Both are in this listing because they do the same job in the design, not because they are interchangeable. Most plants use hangers for the long runs and cantilevers at the walls, in the compressor room, and along the perimeter where the roof structure is out of reach.

Support Spacing, and Why It Is Not Optional

Champion does not publish a support spacing table for Big-Lock in the price list, and we are not going to invent one. What we can say about the principle:

• A grooved joint is not a structural element. Support the pipe, not the coupling, and do not let a run hang on its fittings.
• Support either side of anything heavy. Valves, flanged equipment and filter housings want a hanger each side rather than being carried by the pipe.
• Allow for thermal movement. Aluminum moves more than steel over a temperature swing, and a long run clamped rigidly at both ends has to put that movement somewhere.
• Pitch the main deliberately so condensate runs to a defined low point with a drain on it, rather than collecting wherever a sag happens to be.

Send us the run lengths and the building structure and we will have Champion confirm the spacing for your sizes before you order the brackets.

Shared Technical Specifications

Specification note. Champion's August 2026 price list publishes description, part number and list price for the Big-Lock range and nothing else: no load rating, no support spacing table, no bracket dimensions, no finish and no weights. We have not found a Big-Lock support datasheet. Rather than publish a spacing table from another manufacturer's aluminum pipe system and present it as Champion's, this listing states only what Champion publishes. If support spacing is going to be inspected, ask us and we will get Champion's figures in writing.

Ideal Applications

Hanging a plant header from roof steel or strut channel, carrying a main along a wall or down a column line where there is nothing overhead, supporting a run through the compressor room, and bracketing the pipe either side of valves, dryers and filter housings.

Building a Complete Big-Lock System

• Big-Lock aluminum pipe, 73mm to 273mm
• Straight union couplings
• Union elbows and union tees
• Outlet saddle clamps for drops off the supported main
• Quick-Lock overhead hanging system for the smaller 14mm to 63mm runs

Ordering Notes

• All Big-Lock products and accessories are NO CANCEL / NO RETURN, per Champion's current price list.
• Freight: freight collect from Huntersville, NC 28078 or Las Vegas, NV 89113.
• Shipping weights: Champion publishes no weight for any Big-Lock bracket, so no catalog weight is carried on these variants.
• Photography: Champion publishes no photograph of the Big-Lock brackets, so this listing is deliberately shown without an image rather than with a stand-in from another manufacturer's range.