Skip to content

Collection: ABAC 131 Gallon Rotary Screw Air Compressors

ABAC 131 Gallon Rotary Screw Air Compressors

A 131 gallon receiver is the tank ABAC mounts its AS series screws on when the machine is meant to arrive as one piece. Air end, motor, controller and tank ship bolted together, so the install is a power feed and a line out rather than a slab, a separate receiver and a day of pipe work. Every machine on this page is an AS rotary screw on that 131 gallon tank, from 7.5 HP at 27.1 CFM up to 30 HP at 114.1 CFM.

Pressure is the next choice, and it trades directly against airflow on the same frame. Twelve of these run 125 PSI, twelve run 150 PSI and six run 175 PSI. The 15 HP machine shows the pattern: 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM at 175 PSI. Buy the lowest pressure that still carries the tools at the drop, because every 25 PSI of headroom costs real CFM and real power. Noise runs 65 to 71 dBA across the range, with the quieter 10S air ends at 65 dBA.

Seventeen of the thirty arrive with an integrated refrigerated dryer built into the package, including every 25 and 30 HP machine here, which is the simplest way to keep water out of the lines when the air goes to paint, plasma or pneumatic controls. If the shop already owns a receiver, the same air ends are sold bare on base mount frames. See every tank mounted build in ABAC tank mount rotary screws, the dryer equipped machines in rotary screws with integrated dryer, the full screw range in ABAC AS rotary screw air compressors, and the whole brand in ABAC air compressors. For intermittent rather than continuous air draw, compare the ABAC 120 gallon piston machines instead.