Skip to content

Collection: ABAC Air Compressors Under 5 HP

ABAC Air Compressors Under 5 HP

This is the light end of the ABAC range, from 1 HP up to 3.5 HP. These are the machines for a home garage, a hobby shop, a finish carpentry van or a service bench, where the work is intermittent and the compressor needs to run off an ordinary outlet rather than a dedicated circuit.

Portable and jobsite

The Power Force is a 1 HP pancake on a 6 gallon tank at 175 PSI, the common choice for trim nailing, tires and fastening. The Twin Force steps up to 2 HP and a 4 gallon twin stack with a cast iron oil lubricated pump. The Rollcage runs at 62 dBA, quiet enough to work beside indoors, and the Suitcase weighs 22 lbs with the pump fully enclosed.

Stationary and wall mount

The AB-224VP is a 2 HP single-stage on a 24 gallon vertical tank at 145 PSI, wired for 115V and convertible to 230V. The AB2-2160V1 and AB3-2160V1 put 2 HP and 3.5 HP on a 60 gallon vertical tank, which is the usual step for a two car garage that has outgrown a portable. The XPN Flex is tankless and mounts on the wall with a hose reel built in, for a bay with no floor space to spare.

Where the line is

Under 5 HP means short duty cycle. If an air tool runs continuously for more than a few minutes at a time, or two people work off one compressor, size up. The ABAC piston range starts its two-stage machines at 5 HP, and the AS rotary screw range picks up from there for all day duty. Browse the whole brand in ABAC air compressors.