Skip to content

Collection: ABAC 131 Gallon Tank Mount Air Compressors

ABAC 131 Gallon Tank Mount Rotary Screw Air Compressors

A 131 gallon receiver is the size ABAC builds its complete shop packages on. Every machine on this page is an AS series rotary screw mounted on a 131 gallon ASME horizontal tank, so the compressor, the receiver and the controls arrive as one skid. Set it down, wire it, connect the outlet and the shop has air. The range runs 7.5 HP to 30 HP and delivers 27.1 to 114.1 CFM depending on horsepower and pressure setting.

Why the tank is part of the package

A rotary screw runs continuously rather than cycling the way a piston machine does, but it still needs stored air to absorb the swings when several tools trigger at once. A 131 gallon receiver gives the controller enough buffer to hold line pressure through those spikes and to avoid short loading cycles, which is what wears an airend and a motor. It also drops some moisture out of the air before the line does. Compared with a base mount rotary screw that needs a separate receiver bought, piped and set, the tank mount build is one purchase and one footprint.

Pressure and airflow trade

Each horsepower is offered at 125, 150 and 175 PSI, and the airflow moves the other way as pressure rises. A 15 HP unit gives 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM at 175 PSI. Buy the lowest pressure the tools actually need, because every extra 10 PSI costs airflow and power. The 25 and 30 HP machines run at 125 and 150 PSI and reach 92.2 to 114.1 CFM for larger shops.

With or without the integrated dryer

Roughly half the range is offered in a TMD build with a refrigerated dryer already mounted and plumbed on the skid. That is the simpler choice when the air feeds spray work, plasma cutting, instrumentation or anything else that cannot tolerate water. The TM builds leave the dryer out, which suits a shop that already has one sized for the system or wants to specify a separate ABAC COOL refrigerated dryer. See the whole range of rotary screws with integrated dryer or the full ABAC air compressor lineup.

Sound levels

These machines run between 65 and 71 dBA, quiet enough to sit in the work area rather than in a separate compressor room. The S series variants are the quietest in the range at 65 dBA and also deliver more air at the same horsepower, which is worth comparing before buying on horsepower alone.