Atlas Copco WEDA D95SH Drainage Submersible Pump | Super High Head, 58 HP, 460V 3-Phase, 4" Discharge
| Specifications (As Configured) | |
|---|---|
 Vendor |
Atlas Copco
|
 SKU |
3081621497
|
 Horsepower |
|
| Dimensions | |
 Weight |
770.0 lb
|
Shipping Height |
|
Shipping Length |
|
Shipping Width |
|
482 feet. No other pump in the Atlas Copco WEDA D range lifts water that high, including the 92 HP D100N. The WEDA D95SH is a 58 HP (43 kW) submersible drainage pump built for one job: getting water up out of somewhere deep, through a 4 inch NPT discharge, at up to 700 gpm.
Super high head is a narrow specialty and it comes at a cost in volume. The same 43 kW motor in the D95N build moves 2,980 gpm but tops out at 117 ft. If your lift is modest and your volume is large, the D95N or the D95H is the better buy. The D95SH earns its place on deep shafts, high-rise extraction, multi-stage lifts out of open pit benches, and discharge runs long enough that friction loss swallows what an ordinary pump can make.
Technical Specifications
| Model | WEDA D95SH |
|---|---|
| Part Number (SKU) | 3081621497 |
| Factory Designation | WEDA D95SH 460V D TB 60HZ CSA 4" NPT PC CL |
| Rated Output Power | 58 HP (43 kW) |
| Max. Power Input | 50 kW |
| Max. Head | 482 ft (147 m) |
| Max. Flow | 700 gpm (2,640 l/min) |
| Shaft Speed | 3,500 RPM |
| Discharge Connection | 4" NPT |
| Max. Solids Handling | 0.47" (12 mm) |
| Max. Specific Gravity | 1.1 |
| pH Range | 5 to 8 |
| Power Supply | 460V Three-Phase, 60 Hz |
| Certification | CSA |
| Weight | 667 lbs (300 kg) |
| Dimensions (H x W x Dia.) | 53.1" x 18.3" x 18.3" |
| Warranty | 12 months from start-up or 18 months from receipt of equipment |
Before you order: this one needs a starter
Atlas Copco builds the starter and motor protection into the WEDA D range from the D10 up through the D91. The D95 sits above that line. Budget for an external starter and motor protection panel sized to a 43 kW, 460V three-phase motor, and have your electrician confirm the feeder and overload settings before the pump goes in the hole. We would rather tell you now than have you find out on the job site.
Key Features
- Highest head in the WEDA D family. 482 ft, against 355 ft for the D80SH and 314 ft for the D91H.
- Wear Deflector Technology. The D95 carries the closed impeller with auxiliary vanes on both H and SH builds, plus the polyurethane upper diffuser.
- Readjustable hydraulics. 55 HRC high-chrome cast iron impeller that can be reset toward factory output as it wears.
- Double mechanical seal in a stainless steel cartridge, designed to be changed in the field.
- External oil screws for maintenance checks without opening the pump.
- Dry running capability. The motor is oversized and heat dissipating, so it does not depend on the pumped liquid for cooling.
Model: WEDA D95SH | SKU: 3081621497 | Power: 460V Three-Phase | Max Flow: 700 gpm | Max Head: 482 ft
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
