Tsunami Pure-5T Portable Regenerative Desiccant Dryer — 15 CFM, 5 HP, 120V

The Tsunami Pure-5T is a portable, tank-mounted regenerative desiccant dryer that delivers a steady 15 CFM of ultra-dry compressed air with dew points down to -80°F from any 5 HP compressor. Mounted on a 1-gallon storage tank with an integrated carrying handle, it goes wherever clean, dry air is needed—from the paint booth to the service truck. Two-stage Tsunami pre-filtration strips out liquid water, bulk oil and particulate before air reaches the desiccant towers, and the regenerative drying cycle refreshes the desiccant roughly every two minutes for continuous performance.

Key specifications

• Rated airflow: 15 CFM (fitted for 5 HP compressors)
• Dew point: down to -80°F; relative humidity down to 0.01% RH
• Drying technology: heatless regenerative twin-tower with molecular sieve desiccant
• 2-stage pre-filtration: water separator (10 micron) + oil coalescing filter (0.01 micron)
• Connections: ¼" NPT inlet / ½" NPT outlet
• Max operating pressure: 175 PSI (80 PSI minimum inlet)
• Max inlet air temperature: 150°F
• Power: 120V
• Storage: 1-gallon tank with outlet regulator; portable carry handle
• Controls: solenoid valve timer; purge exhaust mufflers
• Weight: ~50–51 lbs; 23" x 25" x 12"

Choose your drain

Available with a standard float drain (PN 21999-1100) or the upgraded Moisture Minder pneumatic drain (PN 21999-1100-MM) for zero-air-loss, no-electricity condensate removal. Select your drain option above.

Typical applications

Ideal for spray foam rigs, automotive and marine finishing, plasma cutting, laboratory and instrument air, woodworking, and any point-of-use job that needs reliably dry air on the move.

The Tsunami Pure-5T regenerative desiccant dryer pairs proven -80°F drying performance with true portability and low-cost maintenance (under $100/year on average), making it the go-to 15 CFM dryer for 5 HP compressors that need clean, dry air anywhere on site.