Thermal Transfer AHPH Series Air-Cooled Aftercooler, Horizontal Airflow, 69 to 241 CFM
An aftercooler is the cheapest moisture control a compressed air system will ever buy. Dropping the discharge temperature condenses roughly 70 percent of the water out of the air before it reaches the tank, so the drain catches it instead of the tool at the end of the line. The Thermal Transfer AHPH series does that with a brazed aluminum bar and plate core and a horizontal airflow cabinet, sized for shop and light industrial flows with minimum pressure drop.
Key specifications
- Series: Thermal Transfer AHPH, horizontal airflow
- Core: brazed aluminum bar and plate
- Maximum operating pressure: 250 PSIG
- Maximum operating temperature: 350 F
- Motor: 1/3 HP TEFC, 115/230V single phase, on every model in this listing
- AHPH-50-2 (F5030): 69 CFM, 1 in. NPT inlet, 12.80 x 15.86 x 13.71 in. H x W x D, 40 lb.
- AHPH-100-2 (F5040): 126 CFM, 1-1/2 in. NPT inlet, 13.24 x 15.86 x 15.09 in., 45 lb.
- AHPH-200-2 (F5050): 241 CFM, 1-1/2 in. NPT inlet, 17.23 x 19.72 x 16.28 in., 55 lb.
How the CFM rating is stated
Maximum CFM figures are at 200 F inlet air and are based on a 15 degree approach over ambient air temperature. Size on your actual inlet temperature and ambient, not on compressor nameplate CFM alone, because a hot compressor room eats approach temperature. Ship weights are approximate.
Installation
Fit a flexible steel connector between the compressor and the aftercooler so pulsation and thermal growth are not carried into the manifolds. Install a moisture separator with a trap and drain on the outlet, since the whole point of the cooler is to knock water out and something has to remove it. Leave clearance in front of the fan, interlock the cooler so it runs whenever the compressor does, and fuse it to the motor nameplate. An aftercooler can be installed alone or ahead of a refrigerated dryer, where it takes most of the heat load off the dryer and improves its performance.
Typical applications
Reciprocating and rotary screw compressor packages in machine shops, fabrication plants, paint and finishing lines, laboratories and any system feeding air tools, pneumatic controls or a refrigerated dryer.
The Thermal Transfer AHPH series air-cooled aftercooler is available from AirComParts in 69, 126 and 241 CFM sizes with a brazed aluminum bar and plate core, 250 PSIG rating and a 1/3 HP TEFC 115/230V single-phase fan motor.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
