Thermal Transfer AHP Series Air-Cooled Aftercooler, Vertical Airflow, 430 and 760 CFM, 3-Phase
The AHP is the large end of the Thermal Transfer air-cooled aftercooler line: a vertical airflow cabinet on a brazed aluminum bar and plate core, driven by a 1 HP three-phase TEFC fan motor, for compressor rooms running 430 or 760 CFM. Cooling the discharge air removes roughly 70 percent of the moisture before it reaches the receiver, which is what keeps a plant air system from pushing water into tools, controls and finishing equipment.
Key specifications
- Series: Thermal Transfer AHP, vertical airflow
- Core: brazed aluminum bar and plate
- Maximum operating pressure: 250 PSIG
- Maximum operating temperature: 350 F
- Motor: 1 HP TEFC, 208/230/460V three phase, on both models in this listing
- AHP-400 (F5025): 430 CFM, 2 in. NPT inlet, 19.95 x 22.45 x 17.48 in. H x W x D, 120 lb.
- AHP-725 (F5000): 760 CFM, 2 in. NPT inlet, 24.37 x 30.17 x 20.86 in., 170 lb.
How the CFM rating is stated
Maximum CFM figures are at 200 F inlet air and are based on a 15 degree approach over ambient air temperature. Size on real inlet and ambient conditions rather than compressor nameplate CFM alone. Ship weights are approximate.
Installation
Use a flexible steel connector between the compressor and the aftercooler. Fit a separator, trap and drain on the outlet to actually remove the condensate the cooler creates. Keep the fan discharge clear, interlock the unit to run with the compressor, and fuse to the motor nameplate. Installed ahead of a refrigerated dryer, an AHP takes most of the thermal load off the dryer and lets it hold dew point.
Typical applications
Rotary screw and large reciprocating compressor rooms in manufacturing plants, foundries, food and beverage facilities, and any compressed air system where a dryer is being protected from high inlet temperature.
The Thermal Transfer AHP series vertical airflow air-cooled aftercooler is stocked by AirComParts in 430 CFM and 760 CFM sizes with a 250 PSIG brazed aluminum core and a 1 HP TEFC three-phase fan motor.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
