TEX 117 - Scraper/Floor Tool - 2500 BPM – 4” Chisel by Atlas Copco

TEX 117 Scraper/Floor Tool - 2500 BPM - 4” Chisel by Atlas Copco

The Atlas Copco TEX 117 Scraper/Floor Tool is built for fast, controlled surface removal work where hand scraping is too slow and heavy demolition tools are overkill. Designed as a long-reach pneumatic scraper, the TEX 117 helps remove flooring materials, tile, mastic, paint, roofing material, grout, caulking, and other stubborn surface buildup while keeping the operator in a more upright working position.

With a 70 inch overall length, 17 lb operating weight, 9 CFM air consumption, and 2500 BPM impact rate, the TEX 117 gives contractors, maintenance teams, flooring crews, restoration crews, and industrial facilities a practical air-powered tool for surface preparation and material removal. It delivers the repetitive impact needed to break loose bonded material while staying lighter and easier to position than a full-size breaker.

Atlas Copco TEX 117 Key Specs

• Model: TEX 117
• Tool Type: Pneumatic Scraper / Floor Tool
• Part Number / SKU: 9245998732
• Impact Rate: 2500 BPM
• Chisel Size: 4” chisel
• Air Consumption: 9 CFM
• Weight: 17 lb
• Length: 70 in
• Brand: Atlas Copco

Why Use the Atlas Copco TEX 117 Floor Scraper?

The TEX 117 is made for jobs where speed, reach, and control matter. Instead of spending hours bent over with a manual scraper, this tool gives you pneumatic impact power in a long-reach format. The extended body helps reduce time spent working on hands and knees, which can make a major difference during flooring removal, surface cleaning, renovation, and repair work.

The 4” chisel gives the tool a useful working width for lifting, chipping, and scraping without making the tool bulky or difficult to steer. It is narrow enough for controlled removal along edges, seams, and stubborn patches, but wide enough to cover ground faster than a small handheld chipping tool.

Built for Surface Removal and Prep Work

The TEX 117 is a strong fit for removing or breaking loose:

• Floor tiles
• Mastic and adhesive residue
• Paint buildup
• Roofing materials
• Grout
• Caulking
• Light concrete residue
• Surface contaminants before refinishing
• Old flooring material in renovation work

This is not just a flooring tool. It is a surface-cleaning and preparation tool for tough materials that do not come up easily with manual scraping. For maintenance crews, it can help clean up surfaces before repairs. For contractors, it can speed up demolition and prep work on remodels. For industrial facilities, it can help remove buildup from concrete and other hard surfaces when preparing for coating, repair, or replacement work.

Long-Reach Design for Better Working Position

One of the biggest advantages of the TEX 117 is its long-reach layout. At 70 inches long, it lets the operator work from a standing or more upright position rather than spending the entire job bent over. That matters on long scraping jobs, especially when removing flooring over large areas.

The 17 lb weight gives the tool enough mass to stay planted against the surface, while still being manageable for controlled movement. It is built for steady, repetitive work where a small handheld scraper would be too slow and a larger demolition hammer would be harder to control.

Low Air Demand for Jobsite Flexibility

With a 9 CFM air requirement, the TEX 117 is relatively efficient for a pneumatic surface removal tool. That makes it easier to pair with smaller jobsite air systems compared with high-consumption breakers or heavy rivet busters. For crews already running compressed air, the TEX 117 can be added as a dedicated scraping and floor removal tool without requiring extreme air capacity.

For best performance, always run the tool from a properly sized compressor and use clean, lubricated air according to Atlas Copco recommendations. Good air quality, correct hose sizing, and regular lubrication help protect pneumatic tools from premature wear and performance loss.

Best Applications

The Atlas Copco TEX 117 Scraper/Floor Tool is a strong choice for:

1. Flooring removal
   Use the 4” chisel to lift tile, adhesive, and bonded flooring material from concrete or other hard surfaces.
2. Renovation and restoration
   Remove old buildup, paint, grout, caulking, and surface material during remodel or repair work.
3. Industrial maintenance
   Prepare surfaces for coating, patching, cleaning, or repair in shops, plants, utility spaces, and maintenance areas.
4. Roofing and exterior work
   Break loose roofing material and other bonded surface layers where a pneumatic scraper is faster than manual tools.
5. Concrete surface cleanup
   Chip away light concrete residue, grout, or stubborn buildup without jumping straight to a heavier demolition tool.

Built by Atlas Copco

Atlas Copco pneumatic tools are known for rugged construction, practical jobsite performance, and long service life when maintained correctly. The TEX 117 follows that same purpose-built approach: simple, durable, air-powered impact for repetitive scraping and surface removal work.

This tool is especially useful when the job requires more force than a manual scraper but more control than a large breaker. It gives crews a dedicated floor scraper that is easier to position, easier to guide, and better suited to surface removal than general-purpose demolition tools.

Order the TEX 117 Scraper/Floor Tool

Choose the Atlas Copco TEX 117 Scraper/Floor Tool when you need a long-reach pneumatic scraper with a 2500 BPM impact rate, 4” chisel, 9 CFM air demand, and jobsite-ready construction. It is built for removing tile, mastic, paint, roofing materials, grout, caulking, and other stubborn surface materials with less manual effort and better production than hand scraping.