Steel Flexible Connector for Air Compressors, Male NPT x Flare, 1/2 in to 1 in
The male x flare flexible connector does the same job as the male x male version, but it lands on a flare fitting instead of a pipe thread. If your discharge run uses flare connectors, which is common on copper tube installations and on a lot of factory tank plumbing, this is the one that bolts straight up without an adapter.
It sits between the pump discharge and the tank, aftercooler or dryer and absorbs pump movement and the thermal growth of a hot discharge line, so the rigid part of the run stops cracking.
Sizes and maximum working pressure
- S1242: 1/2 in x 18 in, 950 PSI
- S1243: 1/2 in x 24 in, 950 PSI
- S1244: 3/4 in x 18 in, 725 PSI
- S1245: 3/4 in x 24 in, 725 PSI
- S1246: 3/4 in x 30 in, 725 PSI
- S1248: 1 in x 18 in, 575 PSI
- S1249: 1 in x 24 in, 575 PSI
- S1251: 1 in x 30 in, 575 PSI
Every size has a male NPT thread on one end and a flare connection on the other.
Picking the right one
The size is the nominal line size, and both ends match it. Choose the length so the connector curves gently between the two fittings rather than pulling straight; a connector under tension is not absorbing anything. Eighteen inches suits most tank mounted units, and 24 and 30 in are for aftercooler and remote tank runs.
Check the pressure rating against your safety valve setting rather than the cut out pressure. The larger sizes carry the lower ratings, so read the line for the size you are actually buying.
Fitting it
Flare joints seal on the cone, not on the threads, so do not put sealant or tape on a flare. Pipe thread sealant belongs on the NPT end only. Hold the hex on the end fitting with a second wrench while you tighten so the hose body never takes the torque, and do not overtighten a flare nut: snug plus a short pull is enough, and crushing the cone is how a flare joint starts weeping.
Related parts
We also stock the male x male NPT version of this connector in sizes up to 3 in, a copper flexible connector for 1/2 in lines, air cooled aftercoolers, discharge check valves and safety relief valves.
Not sure which one
Tell us the compressor make and model, the discharge port size and how far the connector has to reach, and the Warthog Air Compressor Store team will confirm the right part before you order.
Steel flexible discharge connectors for air compressors with a male NPT end and a flare end, in 1/2, 3/4 and 1 in, in 18, 24 and 30 in lengths.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.