Packard Titan Pro TRCF20 Round Motor Run Capacitor, 20 MFD, 440/370 VAC
The Packard Titan Pro TRCF20 is a 20 MFD round motor run capacitor dual rated for 440 and 370 VAC. It is the continuous-duty capacitor that stays in circuit the whole time a single-phase PSC or capacitor-start capacitor-run motor is turning, wired permanently in series with the auxiliary winding to improve power factor, running torque and efficiency.
Because it is dual rated, the TRCF20 covers both a 440 V and a 370 V position. That makes it the natural stocking item: one part number instead of two, and a direct upward replacement for a 370 V only TRC20, CR20X440R or CAP-20/440R.
Key specifications
- Capacitance: 20 MFD, plus or minus 5 percent
- Voltage: 440/370 VAC, 50/60 Hz
- Type: oil-filled metallized polypropylene film motor run capacitor, continuous duty
- Case: round aluminium can with a steel cover
- Dimensions: 1-3/4 in. diameter, 2-15/16 in. case height, 3-7/16 in. overall including terminals
- Terminals: two terminal posts, each carrying two 1/4 in. male quick-connect blades (four blades total)
- Operating temperature: -40 °C to +70 °C
- Protection: 10,000 AFC rated, with a pressure-interrupter safety switch
- Life: 60,000 hours, 100 percent electrically tested
- Built to: EIA-456-A and IEC 60252-1
- Approvals and compliance: UL Recognized, file E185318; cULus; CSA C22.2 No. 190; RoHS compliant; non-PCB
- Brand: Titan Pro, Packard's own capacitor line. Made in China
Replaces
Packard TRC20 (370 V only), CR20X440R, CAP-20/440R, and equivalent 20 MFD 440 V or 370 V round run capacitors from other makers. Packard is moving this line from the 370 V only TRC series to this dual-rated TRCF series, so the TRCF is the current part going forward.
A dual-rated 440/370 V capacitor may be fitted where a 370 V capacitor is specified. The reverse is never acceptable: do not fit a 370 V capacitor in a 440 V position.
Run capacitor or start capacitor?
A run capacitor carries a single MFD value with a tight tolerance because it is energised continuously. A start capacitor carries a MFD range, such as 161-193 MFD, and is rated for intermittent duty only. They are not interchangeable in either direction. Fitting the wrong one will destroy the capacitor and can damage the motor winding.
Safety
A capacitor stores charge after the power is removed. Isolate the equipment, wait, and discharge the capacitor across a resistor before touching the terminals. Replace any capacitor that is bulged, leaking oil or showing a lifted top.
Not sure which rating you need? Send us a photo of the old capacitor or the motor nameplate and the Warthog Air Compressor Store team will match it.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
