Packard Titan Pro Motor Start Capacitor, 220-250 VAC, Round
Packard Titan Pro round motor start capacitors rated 220-250 VAC, for 230V single-phase compressor, pump and HVAC motors. The start capacitor is what gives a single-phase motor its breakaway torque against head pressure. It is wired in series with the start winding and dropped out of circuit by a potential or current relay, or a centrifugal switch, a second or two after the motor comes up to speed.
If a 230V single-phase compressor hums, pulls heavy current and will not turn over, a failed start capacitor is the first thing to check.
Key specifications
- Type: dry electrolytic, non-polarized motor start capacitor
- Voltage: 220-250 VAC, 50/60 Hz
- Case: round, black molded phenolic, moisture and oil resistant, with a pressure-sensitive vent in the base
- Terminals: two terminal posts, each carrying two 1/4 in. male quick-connect blades (four blades total)
- Operating temperature: -40 °C to +65 °C
- Duty: intermittent, rated for a 3 second start and up to 20 starts per hour
- Standards: meets or exceeds EIA RS-463 Type 2
- Approvals: UL Recognized Component, cUL, CSA C22.2 No. 190
- Brand: Titan Pro, Packard's own capacitor line. Made in China
Ratings and case sizes
- 161-193 MFD (TTMJ161): 2-1/16 in. diameter x 3-3/8 in. high. Supersedes Packard PTMJ161
- 216-259 MFD (TTMJ216): 2-1/16 in. x 3-3/8 in. Supersedes PTMJ216
- 270-324 MFD (TTMJ270): 2-1/16 in. x 3-3/8 in. Supersedes PTMJ270
- 400-480 MFD (TTMJ400): 2-1/16 in. x 4-3/8 in. Supersedes PTMJ400
- 430-516 MFD (TTMJ430): 2-9/16 in. x 4-3/8 in. Supersedes PTMJ430
- 630-750 MFD (TTMJ630): 2-9/16 in. x 4-3/8 in. Supersedes PTMJ630
Case heights exclude the terminals. Allow roughly another 1/2 in. of clearance above the can when fitting one into a tight terminal box. Packard also builds several of these ratings in an alternate taller can, marked with an A suffix. The electrical rating is identical; only the can dimensions change. If your enclosure is tight in one direction and roomy in the other, ask us and we will check which can fits.
Why start capacitors carry a MFD range
A start capacitor is specified as a range, such as 161-193 MFD, rather than a single value. Electrolytic capacitors have a wide manufacturing tolerance and the value drifts over life, so the range is the specification. Run capacitors, which stay in circuit continuously, are specified as a single value with a tight tolerance instead.
Never substitute a run capacitor for a start capacitor, or the reverse. They are different constructions with different duty ratings, and getting it wrong will destroy the capacitor and can damage the motor winding. Match the MFD range and the voltage rating on the old capacitor. You may fit a capacitor with a higher voltage rating than the original, but never a lower one.
Safety
A capacitor stores charge after the power is removed. Isolate the equipment, wait, and discharge the capacitor across a resistor before touching the terminals. Replace any capacitor that is swollen, leaking or has a bulged base.
Not sure which rating you need? Send us a photo of the old capacitor or the motor nameplate and the Warthog Air Compressor Store team will match it.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.