Maska MA Single-Groove Cast Iron V-Belt Pulley, Fixed Bore, 3.95 and 4.95 in. OD
Maska MA series single-groove cast iron pulley for A section V-belts and for 3L and 4L fractional horsepower belts. These are finished bore pulleys, bored and keyed at the factory with set screws, so there is no bushing to buy and nothing to assemble. Pick the outside diameter and the bore that matches your shaft.
Key specifications
- Single groove, A section V-belts (also 3L and 4L)
- Cast iron construction
- Fixed finished bore with keyway and set screws, no bushing required
- Face width 3/4 in., overall length 1-3/8 in.
- Light duty service
Sizes and diameters
- MA40: 3.95 in. OD, 3.61 in. 3L pitch dia., 3.95 in. 4L pitch dia., 3.7 in. A section datum dia., 1.85 lb. Available in 5/8 in. and 3/4 in. bore.
- MA50: 4.95 in. OD, 4.61 in. 3L pitch dia., 4.95 in. 4L pitch dia., 4.7 in. A section datum dia., 2.30 lb. Available in 3/4 in. bore.
Cross references
The MA40 interchanges with the industry AK41 and the MA50 with the AK51, matched on outside diameter: AK41 is 3.95 in. and AK51 is 4.95 in. Equivalents are listed by Browning, Martin, TB Wood's and Continental under those AK numbers. Maska was acquired by Baldor Electric in 2008 and the MA part numbers are carried by several distributors under both the Maska and the Dodge labels, so an MA40 and a Dodge MA40 in the same bore are the same part number.
Pitch diameter convention
Maska publishes a 3L and a 4L pitch diameter for these pulleys, where the 4L figure equals the outside diameter. Other catalogs publish a single A section datum diameter instead, which is a different number for the same pulley. Both figures are given above so you can match whichever convention your existing drive data uses.
Typical applications
Single-groove A section pulleys in the 4 to 5 in. range are the everyday motor pulley on small reciprocating air compressors, bench grinders, blowers, small pumps, farm equipment and shop machinery. Because the bore is finished rather than bushed, installation is a matter of sliding it onto the shaft, setting the key and tightening the set screws, which makes them the quick answer for a 5/8 in. or 3/4 in. motor shaft.
This Maska MA single-groove cast iron V-belt pulley is stocked in 3.95 in. and 4.95 in. outside diameters with 5/8 in. and 3/4 in. finished bores, for A, 3L and 4L belts, cross referenced to AK41 and AK51.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
