Champion PL-Series Factory-Installed Options and Adders
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
CHPL-OPT-CP2N4-A
|
|
Factory-installed options for the Champion PL-Series
This page carries every priced option adder Champion publishes for the PL-Series pressure lubricated range, pages 34 through 47 of the August 2026 reciprocating price book. Each option is listed once per price, with the models it applies to spelled out, so you can see the real cost of a NEMA 4 panel or a galvanized receiver before the order goes in rather than after the quote comes back. There are 111 priced positions in total across 22 options.
These are factory options. They are fitted while the compressor is built in Princeton, Illinois, and they go on the same purchase order as the machine. Nothing on this page is a universal aftermarket part, and nothing here is sold on its own without a compressor behind it.
The compressors themselves are on two listings: Champion PL-Series simplex, 5 through 30 HP and Champion PL-Series duplex, 5 through 30 HP. Pick the machine first, then add the options you need from the selector above.
Every priced option, as the book prints it
Prices move three ways on this range: by horsepower, by simplex against duplex, and on the tank options by receiver size. A duplex is usually, but not always, exactly twice the simplex adder, because there are two pumps, two motors and two control circuits to fit. Where a price does not follow that rule, the table below shows it as printed rather than smoothing it out.
| Option | Applies to | Champion list adder | Our price | SKU |
| Control Panel Level 2 - NEMA 4 | 5/7.5/10/15 HP Simplex | $520 | $245 | CHPL-OPT-CP2N4-A |
| 5/7.5/10 HP Duplex | $1,050 | $493 | CHPL-OPT-CP2N4-B | |
| 15 HP Duplex | $1,450 | $681 | CHPL-OPT-CP2N4-C | |
| Control Panel Level 2 NEMA 4 - 208/230V 3PH | 20 HP Simplex | $510 | $240 | CHPL-OPT-CP2N4230-A |
| 20 HP Duplex | $1,470 | $691 | CHPL-OPT-CP2N4230-B | |
| 25 HP Simplex | $505 | $238 | CHPL-OPT-CP2N4230-C | |
| 25 HP Duplex | $1,415 | $665 | CHPL-OPT-CP2N4230-D | |
| 30 HP Simplex | $530 | $249 | CHPL-OPT-CP2N4230-E | |
| 30 HP Duplex | $1,910 | $897 | CHPL-OPT-CP2N4230-F | |
| Control Panel Level 2 NEMA 4 - 460/575V 3PH | 20/30 HP Simplex | $520 | $245 | CHPL-OPT-CP2N4460-A |
| 20/30 HP Duplex | $1,450 | $681 | CHPL-OPT-CP2N4460-B | |
| 25 HP Simplex | $502 | $236 | CHPL-OPT-CP2N4460-C | |
| 25 HP Duplex | $1,407 | $661 | CHPL-OPT-CP2N4460-D | |
| NEMA 4 Electrical and Pressure Switch | 5/7.5/10/15/20/30 HP Simplex | $950 | $447 | CHPL-OPT-N4EPS-A |
| 5/7.5/10/15/20/30 HP Duplex | $1,900 | $893 | CHPL-OPT-N4EPS-B | |
| 25 HP Simplex | $922 | $433 | CHPL-OPT-N4EPS-C | |
| 25 HP Duplex | $1,841 | $865 | CHPL-OPT-N4EPS-D | |
| Vinyl (Epoxy) Lined Tank | 30 Gal & 60 Gal | $1,990 | $935 | CHPL-OPT-VLT-A |
| 80 Gal | $2,340 | $1,099 | CHPL-OPT-VLT-B | |
| 120 Gal, 5/7.5/10/15/20/30 HP | $2,880 | $1,353 | CHPL-OPT-VLT-C | |
| 240 Gal Duplex, 5/7.5/10/15/20/30 HP | $3,770 | $1,771 | CHPL-OPT-VLT-D | |
| 240 Gal Simplex, 7.5/15/20/30 HP | $3,770 | $1,771 | CHPL-OPT-VLT-E | |
| 240 Gal Simplex, 10/25 HP | $3,651 | $1,715 | CHPL-OPT-VLT-F | |
| 240 Gal Duplex, 25 HP | $3,651 | $1,715 | CHPL-OPT-VLT-G | |
| 120 Gal Simplex, 25 HP | $2,792 | $1,311 | CHPL-OPT-VLT-H | |
| Galvanized Coated Tank | 30 Gal & 60 Gal | $2,160 | $1,015 | CHPL-OPT-GCT-A |
| 80 Gal | $2,700 | $1,268 | CHPL-OPT-GCT-B | |
| 120 Gal, 5/7.5/10/15/20/30 HP | $3,950 | $1,855 | CHPL-OPT-GCT-C | |
| 240 Gal, 5/7.5/10/15/20/30 HP | $6,450 | $3,029 | CHPL-OPT-GCT-D | |
| 120 Gal Simplex, 25 HP | $3,834 | $1,801 | CHPL-OPT-GCT-E | |
| 240 Gal, 25 HP | $6,253 | $2,936 | CHPL-OPT-GCT-F | |
| 250 PSI Receiver | 60 Gal | $4,580 | $2,151 | CHPL-OPT-R250-A |
| 80 Gal | $4,570 | $2,146 | CHPL-OPT-R250-B | |
| 120 Gal, 5/7.5/10/15/20/30 HP | $6,240 | $2,930 | CHPL-OPT-R250-C | |
| 30 Gal | $3,230 | $1,517 | CHPL-OPT-R250-D | |
| 240 Gal, 5/7.5/10/15/20/30 HP | $6,720 | $3,156 | CHPL-OPT-R250-E | |
| 120 Gal Simplex, 25 HP | $6,052 | $2,842 | CHPL-OPT-R250-F | |
| 240 Gal, 25 HP | $6,522 | $3,063 | CHPL-OPT-R250-G | |
| Massachusetts Code Fittings | 5/7.5/10/15/20/30 HP Simplex & Duplex | $200 | $94 | CHPL-OPT-MCF-A |
| 25 HP Simplex & Duplex | $191 | $90 | CHPL-OPT-MCF-B | |
| TEFC Motor - Single Phase | 5 HP Simplex | $1,260 | $592 | CHPL-OPT-TEFC1-A |
| 5 HP Duplex | $2,510 | $1,179 | CHPL-OPT-TEFC1-B | |
| 7.5 HP Simplex | $2,350 | $1,104 | CHPL-OPT-TEFC1-C | |
| 7.5 HP Duplex | $4,690 | $2,203 | CHPL-OPT-TEFC1-D | |
| TEFC Motor - Three Phase | 5 HP Simplex | $750 | $353 | CHPL-OPT-TEFC3-A |
| 5 HP Duplex | $1,490 | $700 | CHPL-OPT-TEFC3-B | |
| 20 HP Simplex | $1,490 | $700 | CHPL-OPT-TEFC3-C | |
| 7.5 HP Simplex | $940 | $442 | CHPL-OPT-TEFC3-D | |
| 7.5 HP Duplex | $1,860 | $874 | CHPL-OPT-TEFC3-E | |
| 10 HP Simplex | $1,130 | $531 | CHPL-OPT-TEFC3-F | |
| 10 HP Duplex | $2,250 | $1,057 | CHPL-OPT-TEFC3-G | |
| 15 HP Simplex | $1,310 | $616 | CHPL-OPT-TEFC3-H | |
| 15 HP Duplex | $2,620 | $1,231 | CHPL-OPT-TEFC3-I | |
| 20 HP Duplex | $2,980 | $1,400 | CHPL-OPT-TEFC3-J | |
| 25 HP Simplex | $1,764 | $829 | CHPL-OPT-TEFC3-K | |
| 25 HP Duplex | $3,527 | $1,656 | CHPL-OPT-TEFC3-L | |
| 30 HP Simplex | $2,050 | $963 | CHPL-OPT-TEFC3-M | |
| 30 HP Duplex | $4,100 | $1,926 | CHPL-OPT-TEFC3-N | |
| Air Cooled Aftercooler | 5/7.5 HP (PL15 pump) Simplex | $820 | $385 | CHPL-OPT-ACA-A |
| 5/7.5 HP (PL15 pump) Duplex | $1,640 | $770 | CHPL-OPT-ACA-B | |
| 7.5/10/15 HP (PL30 pump) Simplex | $990 | $465 | CHPL-OPT-ACA-C | |
| 7.5/10/15 HP (PL30 pump) Duplex | $1,970 | $925 | CHPL-OPT-ACA-D | |
| 15 HP (PL40 pump) Simplex | $1,910 | $897 | CHPL-OPT-ACA-E | |
| 15 HP (PL40 pump) Duplex | $3,790 | $1,780 | CHPL-OPT-ACA-F | |
| 20/30 HP Simplex | $1,800 | $846 | CHPL-OPT-ACA-G | |
| 20/30 HP Duplex | $3,810 | $1,789 | CHPL-OPT-ACA-H | |
| 25 HP Simplex | $1,739 | $817 | CHPL-OPT-ACA-I | |
| 25 HP Duplex | $3,675 | $1,726 | CHPL-OPT-ACA-J | |
| Food Grade Oil | 5/7.5 HP (PL15 pump) Simplex | $40 | $19 | CHPL-OPT-FGO-A |
| 5/7.5 HP (PL15 pump) Duplex | $60 | $29 | CHPL-OPT-FGO-B | |
| 7.5/10/15 HP (PL30/PL40 pump) Simplex | $50 | $24 | CHPL-OPT-FGO-C | |
| 7.5/10/15 HP (PL30/PL40 pump) Duplex | $100 | $47 | CHPL-OPT-FGO-D | |
| 20/30 HP Simplex | $80 | $38 | CHPL-OPT-FGO-E | |
| 20/30 HP Duplex | $140 | $66 | CHPL-OPT-FGO-F | |
| 25 HP Simplex | $68 | $32 | CHPL-OPT-FGO-G | |
| 25 HP Duplex | $133 | $63 | CHPL-OPT-FGO-H | |
| Low Oil Stop Control | 5/7.5/10/15/20/30 HP Simplex | $530 | $249 | CHPL-OPT-LOSC-A |
| 5/7.5/10/15/20/30 HP Duplex | $1,050 | $493 | CHPL-OPT-LOSC-B | |
| 25 HP Simplex | $509 | $239 | CHPL-OPT-LOSC-C | |
| 25 HP Duplex | $1,018 | $478 | CHPL-OPT-LOSC-D | |
| Low Oil Pressure Switch | 5/7.5/10/15/20/30 HP Simplex | $2,530 | $1,188 | CHPL-OPT-LOPS-A |
| 5/7.5/10/15/20/30 HP Duplex | $5,060 | $2,376 | CHPL-OPT-LOPS-B | |
| 25 HP Simplex | $2,454 | $1,153 | CHPL-OPT-LOPS-C | |
| 25 HP Duplex | $4,906 | $2,304 | CHPL-OPT-LOPS-D | |
| Electric Tank Drain | 5/7.5/10/15/20/30 HP Simplex & Duplex | $400 | $188 | CHPL-OPT-ETD-A |
| 25 HP Simplex & Duplex | $380 | $179 | CHPL-OPT-ETD-B | |
| High Temperature Switch | 5/7.5/10/15/20/30 HP Simplex | $520 | $245 | CHPL-OPT-HTS-A |
| 5/7.5/10/15/20/30 HP Duplex | $1,040 | $489 | CHPL-OPT-HTS-B | |
| 25 HP Simplex | $503 | $237 | CHPL-OPT-HTS-C | |
| 25 HP Duplex | $1,005 | $472 | CHPL-OPT-HTS-D | |
| Vibration Isolators | 5/7.5/10/15/20/30 HP Simplex & Duplex | $210 | $99 | CHPL-OPT-VIB-A |
| 25 HP Simplex & Duplex | $203 | $96 | CHPL-OPT-VIB-B | |
| Air Filter Maintenance Indicator | 5/7.5/10/15/20/30 HP Simplex | $140 | $66 | CHPL-OPT-AFMI-A |
| 5/7.5/10/15/20/30 HP Duplex | $280 | $132 | CHPL-OPT-AFMI-B | |
| 25 HP Simplex | $133 | $63 | CHPL-OPT-AFMI-C | |
| 25 HP Duplex | $266 | $125 | CHPL-OPT-AFMI-D | |
| Base Mount Control Package - NEMA 1 | Base Mount, 5/7.5/10/15/20/30 HP | $340 | $160 | CHPL-OPT-BMCPN1-A |
| Base Mount, 25 HP | $324 | $153 | CHPL-OPT-BMCPN1-B | |
| Base Mount Control Package - NEMA 4 | Base Mount, 5/7.5/10/15/20/30 HP | $990 | $465 | CHPL-OPT-BMCPN4-A |
| Base Mount, 25 HP | $956 | $449 | CHPL-OPT-BMCPN4-B | |
| Domestic Wood Crate | 5/7.5/10/15/20/25/30 HP Simplex & Duplex | $100 | $47 | CHPL-OPT-DWC-A |
| Premium Extended Warranty Kit | 5/7.5 HP (PL15 pump) Simplex | $1,270 | $930 | CHPL-OPT-PEW-A |
| 5/7.5 HP (PL15 pump) Duplex | $2,540 | $1,859 | CHPL-OPT-PEW-B | |
| 7.5/10/15 HP (PL30 pump) Simplex | $2,310 | $1,691 | CHPL-OPT-PEW-C | |
| 7.5/10/15 HP (PL30 pump) Duplex | $4,620 | $3,381 | CHPL-OPT-PEW-D | |
| 15 HP (PL40 pump) Simplex | $1,900 | $1,391 | CHPL-OPT-PEW-E | |
| 15 HP (PL40 pump) Duplex | $3,800 | $2,781 | CHPL-OPT-PEW-F | |
| 20/30 HP Simplex | $3,030 | $2,218 | CHPL-OPT-PEW-G | |
| 20/30 HP Duplex | $6,060 | $4,435 | CHPL-OPT-PEW-H | |
| 25 HP Simplex | $2,938 | $2,150 | CHPL-OPT-PEW-I | |
| 25 HP Duplex | $5,875 | $4,299 | CHPL-OPT-PEW-J |
The strike-through figure on each variant is the Champion list adder. The price you pay is our standard distributor price on the same basis as the compressor itself.
What each option does, and when it earns its keep
Control Panel Level 2 - NEMA 4. The standard package ships with a mounted NEMA 1 panel, which is a dust-tight enclosure and nothing more. NEMA 4 buys you a washdown rated, hose-directed enclosure. Specify it for food plants, wash bays, outdoor sheds and anywhere the floor gets hosed. Read the note below about what else has to go on the order with it, because the panel on its own does not make the package NEMA 4.
NEMA 4 Electrical and Pressure Switch. The companion item to the panel. Champion is explicit in the book: a NEMA 4 control panel has to be ordered together with the NEMA 4 electrical and pressure switch and a TEFC motor before the machine counts as a NEMA 4 package. Buying one of the three and expecting the rating is the most common specification mistake on this range.
Vinyl (epoxy) lined tank and galvanized coated tank. Two different answers to the same problem, which is condensate sitting in the bottom of a carbon steel receiver. The vinyl liner is the cheaper of the two and suits a shop that drains on a schedule. Galvanizing costs roughly double at the larger tank sizes and is what we would put under a machine running humid air with an unreliable drain. Both price by receiver size, not by horsepower, which is why an 80 gallon tank costs the same to line whether it sits under a 5 HP or a 10 HP pump.
250 PSI receiver. The standard receiver is rated for the 175 PSIG package. If you are running the machine at its 250 PSIG rating, this is not optional, it is the receiver that matches the duty. It is the most expensive tank option on the page and it is worth checking what pressure you actually need at the tool before paying for it.
Massachusetts code fittings. Flat $200 across almost the whole range. Required if the machine is going into Massachusetts, irrelevant everywhere else.
TEFC motor, single and three phase. Totally enclosed fan cooled in place of the standard open drip proof motor. Buy it for dusty, damp or lint-heavy rooms, and buy it if you are specifying a NEMA 4 package, because the rating depends on it. Single phase TEFC is offered only on the 5 and 7.5 HP machines, since everything from 10 HP up is three phase only.
Air cooled aftercooler. Drops discharge temperature and knocks a large share of the water out before the air reaches the tank. On a two stage machine feeding anything with an orifice in it, this is the single most useful option on the page. It prices by pump frame rather than horsepower, which is why a 7.5 HP on the PL15 pump is $820 and a 7.5 HP on the PL30 pump is $990.
Food grade oil. An NSF H1 registered lubricant charge instead of the standard fill. Between $40 and $140 depending on crankcase size. Most food, beverage and pharmaceutical audits want it even on a machine whose air never touches product.
Low oil stop control and low oil pressure switch. Two different devices and people order the wrong one. The stop control is a level switch, around $530, and it opens the circuit when the oil in the crankcase drops. The pressure switch is around $2,530 and it watches actual oil pressure in a pressure lubricated pump, which is what the PL range is. If the machine runs unattended, the pressure switch is the one that catches a failing oil pump before the bearings go. If someone checks it daily, the level switch is usually enough.
Electric tank drain. A timed solenoid drain in place of the manual petcock. $400 flat across the whole range, and the cheapest reliability improvement here. Manual drains get forgotten and the tank rusts from the inside.
High temperature switch. Opens the control circuit on discharge overtemperature. Specify it on anything in a hot room, in an enclosure, or behind a door nobody opens.
Vibration isolators. $210 for the set. Worth it on a mezzanine, on a wood floor, or anywhere the machine shares a wall with an office.
Air filter maintenance indicator. A visual restriction gauge on the inlet. Cheap, and useful where there is no scheduled filter interval.
Base mount control package, NEMA 1 or NEMA 4. Base mounted machines ship without a receiver and without start and stop control, so this package adds the pressure regulating valve, ball valve, pressure gauge, check valve and pressure switch that a tank mounted unit gets as part of the receiver assembly. If you are buying a base mount unit to sit on a customer-supplied tank, you need one of these two.
Domestic wood crate. New in the 2026 book, and worth understanding. Champion cut $100 off the base list price of the reciprocating range and made crating a priced option, so the machine looks $100 cheaper than it did and is not, unless you are happy with a pallet. Buy the crate if the compressor is going on a second truck, into storage, or anywhere it will be handled more than once.
Premium extended warranty kit. Priced per package rather than per part. Note that we price this one on the conservative aftermarket basis rather than the package discount, because Champion's discount schedule does not say which table a warranty kit falls under. If you are buying several, ask us and we will get it confirmed with the factory.
Order-time deducts and no-charge items, which are not variants
Three things on these pages reduce the price or cost nothing, so they cannot be sold as line items. Tell us at order time and we will put them on the factory order.
- Ship loose controller deducts $190 on a 5 to 10 HP simplex, $380 on a 5 to 10 HP duplex, $310 on a 15 to 30 HP simplex, $600 on a 15 to 30 HP duplex, and $291 and $577 on the 25 HP simplex and duplex. The controller comes in the crate rather than mounted and wired, which suits a job where the panel is going on a wall.
- Less motor deducts between $310 and $3,110 depending on horsepower and whether the machine is simplex or duplex. Only worth asking about if you are supplying a motor already.
- California code is standard at no charge on every tank mounted machine in the range, and prints N/A on base mount units because there is no receiver to certify.
- Hour meter, test-off-auto switch, panel mounting and the Level 2 NEMA 1 panel are all standard on every PL-Series package. Champion notes that the hour meter, TOA switch, low oil stop control, low oil pressure switch, electric tank drain and high temperature switch all carry a NEMA 4 rating as standard, whichever panel you order.
Where the book is inconsistent, said plainly
We publish what Champion prints. Four things on these pages do not follow the pattern of the rest of the section, and you should know about them before you compare a quote against a neighbouring model.
- The 240 gallon vinyl liner on the 10 HP horizontal is printed at $3,651 where every other 240 gallon column in the section prints $3,770. The $3,651 figure is exactly what the 25 HP page prints, so it looks like a cell copied across pages. We have asked the factory. Until we have an answer we sell it at the printed price, which is the lower of the two.
- The whole 25 HP page runs about 3 percent below the 20 and 30 HP pages on every option that should be flat across horsepower. A high temperature switch is $520 on the 20 and 30 HP machines and $503 on the 25 HP. Motor-related options are not affected and scale correctly. Again, the printed figure is the lower one and that is what we charge.
- On the 20, 25 and 30 HP pages the NEMA 4 control panel is split by voltage and the gap can be wide. On the 30 HP duplex it is $1,910 at 208/230V and $1,450 at 460/575V. Tell us the voltage when you ask for a panel price on those three horsepowers.
- The two NEMA 1 control panel rows on those same pages print nothing at all, not even the "Std." that appears on every other page. We read that as a dropped Std. rather than a withdrawn option, and we have asked.
Ordering notes
- Champion publishes no shipping weight for any option adder in this section, so every variant on this page carries a weight of zero rather than an invented figure. The compressor weights are real and published, and they are on the two compressor listings.
- The order entry configurator is PL3-30-SIMPLEX-A for every simplex page and PL3-30-DUPLEX-A for every duplex page, one number per configuration across the whole range.
- The 3 HP band is printed "Consult Factory" with no package list price, although the book does publish its option adders. We cannot put a price on a 3 HP PL-Series machine or sell its options as line items, so both are available by quote. Ask us and we will get the factory price.
- Pages 34 through 47 print no dimensions, no sound level and no base warranty statement for any PL-Series package. We would rather say that than quote a figure we cannot source.
- Fitting one of these options after the machine is in service means buying the part through Champion service parts at a different price. Order it with the compressor if you know you want it.
Options on other Champion reciprocating machines
The same option names appear across the Champion reciprocating range at different prices, because a bare pump, an AirStation package and a PL-Series package each carry their own discount structure. If you are not buying a PL, start from the R-Series AirStation options or the R-Series bare pump options, or browse Champion piston air compressors if the machine is not settled yet.
Why buy these from Warthog
We are an authorized Champion distributor, so these go on a factory order, arrive installed and leave the machine's warranty intact. We will also tell you when an option is not worth the money on your application. On this page that is most often the low oil pressure switch on a machine somebody checks every morning anyway, and the 250 PSI receiver on a shop that never runs above 150. Send us the model number and the zip code and we will price the machine, the options and the freight together.
Questions we get on this page
Why is the duplex adder not always exactly double? Mostly it is. The electric tank drain, the vibration isolators, the Massachusetts fittings, the wood crate and the tank options are all single-item costs that do not double, because a duplex has one receiver and one crate. Everything that exists twice on a duplex, the motors, the control circuits and the oil, does double.
Can I order the NEMA 4 panel on its own? You can, and the machine still will not be a NEMA 4 package. Champion requires the NEMA 4 electrical and pressure switch and a TEFC motor on the same order for the rating to mean anything. We will flag it if an order comes through with only one of the three.
What is the difference between the low oil stop control and the low oil pressure switch? Level against pressure. The PL-Series is a pressure lubricated pump with an oil pump feeding the bearings, so a loss of oil pressure can happen with oil still in the crankcase. The pressure switch catches that case and the level switch does not.
Do these prices include installation? They include factory installation on the compressor. They do not include site work, piping or electrical hookup at your end.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.