Champion PL-Series Engine Driven Piston Air Compressor, Gas and Diesel
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
BGPL7H
|
|
|
|
|
Gallons |
|
| Dimensions | |
|
400.0 lb
|
|
Champion PL-Series engine driven air compressors, gas and diesel
Sixteen factory configurations, all built on one pump: the PL15A, pressure lubricated, two stage. The reason to specify a PL engine driven machine rather than the splash lubricated R-Series sitting beside it in the same Champion catalog is printed in Champion's own footnote on the spec sheet: only pressure lubricated units are capable of 250 PSI. If the work needs 250 PSIG, this is the range that does it.
Four engines across two fuels. Honda GX390 at 13 HP and Kohler Command Pro CH440 at 14 HP on gasoline, Kohler KD440 at 9.1 HP and Yanmar L100W at 9.3 HP on diesel. Every one has an electric key start switch and a head unloader, so the machine runs constant load and no load instead of cycling the engine against the receiver.
About the photograph. Champion publishes no product shot of a PL-Series engine driven package. The first image is Champion's own engine drive illustration, the one its bulletin uses to head the combined R and PL-Series 9.1 to 14 HP section, and the decal on the tank in it reads R-SERIES. The package hardware is the same. What differs on a PL machine is the pump, and that is the second image.
What 250 PSI costs you in air
Getting to 250 PSIG means turning the pump slower, and the delivered air comes down with it. Champion publishes both ratings for every engine, so you can decide before you order rather than after.
| Engine | 175 PSIG | 250 PSIG |
|---|---|---|
| Honda GX390 13 HP and Kohler CH440 14 HP | 23.2 CFM delivered, 29.9 displacement, 1,025 RPM | 19.8 CFM delivered, 27.7 displacement, 950 RPM |
| Kohler KD440 9.1 HP diesel | 20.1 CFM delivered, 25.3 displacement, 870 RPM | 13.6 CFM delivered, 18.9 displacement, 650 RPM |
| Yanmar L100W 9.3 HP diesel | 21.7 CFM delivered, 27.4 displacement, 940 RPM | 18.7 CFM delivered, 23.6 displacement, 810 RPM |
Look at the 9.1 HP Kohler diesel row. It gives up almost a third of its delivered air going from 175 to 250, where the Yanmar gives up about 14 percent. If you are buying a diesel specifically to run at 250 PSIG, the Yanmar is the one to look at even though it costs more, and we would rather tell you that now than sell you the cheaper machine twice.
The 250 PSIG rating requires the 250 PSI receiver option on tank models. It is a different vessel, not a setting.
Gasoline, 13 and 14 HP, PL15A pump
| Model | Engine | Tank | L x W x H (in) | Ship wt | Champion list | Our price |
|---|---|---|---|---|---|---|
| BGPL7H | Honda GX390, 13 HP | Base Mounted (No Tank) | 41.2 x 20.5 x 29.3 | 400 lb | $10,260 | $4,818 |
| HGPL7-LPH | Honda GX390, 13 HP | 4x2 Gallon Horizontal | 41.3 x 22.3 x 37.6 | 500 lb | $11,330 | $5,320 |
| HGPL7-3H | Honda GX390, 13 HP | 30 Gallon Horizontal | 41.6 x 20.5 x 45.5 | 485 lb | $10,960 | $5,146 |
| HGPL7-6H | Honda GX390, 13 HP | 60 Gallon Horizontal | 52.5 x 21.3 x 49.1 | 585 lb | $11,320 | $5,315 |
| HGPL7-8H | Honda GX390, 13 HP | 80 Gallon Horizontal | 67.5 x 21.3 x 49.1 | 640 lb | $11,550 | $5,423 |
| BGPL7K | Kohler CH440, 14 HP | Base Mounted (No Tank) | 41.2 x 20.5 x 29.3 | 400 lb | $9,760 | $4,583 |
| HGPL7-LPK | Kohler CH440, 14 HP | 4x2 Gallon Horizontal | 41.3 x 22.3 x 37.6 | 500 lb | $10,940 | $5,137 |
| HGPL7-3K | Kohler CH440, 14 HP | 30 Gallon Horizontal | 41.6 x 20.5 x 45.5 | 485 lb | $10,560 | $4,959 |
| HGPL7-6K | Kohler CH440, 14 HP | 60 Gallon Horizontal | 52.5 x 21.3 x 49.1 | 585 lb | $10,930 | $5,132 |
| HGPL7-8K | Kohler CH440, 14 HP | 80 Gallon Horizontal | 67.5 x 21.3 x 49.1 | 640 lb | $11,160 | $5,240 |
The Honda lists higher than the Kohler on every matching tank, between $390 and $500, and the two make identical air at identical pump speed. Champion prints it that way and we price from the printed list. Buy the Honda for parts availability and resale, which in most of the country is still the better of the two. Buy the Kohler to save the money and to get the remote start and choke option, which Champion does not offer on the Honda at all.
Diesel, 9.1 and 9.3 HP, PL15A pump
| Model | Engine | Tank | L x W x H (in) | Ship wt | Champion list | Our price |
|---|---|---|---|---|---|---|
| BDPL5K | Kohler KD440, 9.1 HP | Base Mounted (No Tank) | 41.2 x 20.6 x 29.3 | 440 lb | $18,840 | $8,846 |
| HDPL5-3K | Kohler KD440, 9.1 HP | 30 Gallon Horizontal | 41.6 x 20.5 x 45.5 | 570 lb | $19,630 | $9,217 |
| HDPL5-8K | Kohler KD440, 9.1 HP | 80 Gallon Horizontal | 67.5 x 21.3 x 49.1 | 680 lb | $20,200 | $9,485 |
| BDPL5Y | Yanmar L100W, 9.3 HP | Base Mounted (No Tank) | 41.2 x 20.6 x 29.3 | 440 lb | $20,820 | $9,776 |
| HDPL5-3Y | Yanmar L100W, 9.3 HP | 30 Gallon Horizontal | 42.7 x 20.5 x 45.5 | 570 lb | $21,610 | $10,147 |
| HDPL5-8Y | Yanmar L100W, 9.3 HP | 80 Gallon Horizontal | 67.5 x 21.3 x 49.1 | 680 lb | $22,180 | $10,414 |
The diesel range is narrower than the gas range on purpose: 30 and 80 gallon only. There is no diesel base model with the 4 gallon twin low profile tank and no 60 gallon diesel.
Standard on all sixteen
- Electric key start switch on every engine
- Champion PL15A pressure lubricated two-stage pump
- Head unloaders for constant load and no load operation
- ASME coded receiver on the 30, 60 and 80 gallon tanks
- Intake filter and silencer
- Enclosed belt guard
- Vibration isolators
- Pilot valve with toggle on tank mounted units, so the machine starts unloaded without bleeding the receiver down
- California Code receiver at no charge on any tank model, ordered at the time of purchase
Electric start engines ship without a battery. Champion does not supply one. Size it to the engine and buy it locally.
The ASME exclusions matter if you are in a jurisdiction that inspects vessels: the base mount models have no receiver at all, and the 4 gallon twin low profile tank on the HGPL7-LPH and HGPL7-LPK is not ASME coded. The 30, 60 and 80 gallon horizontals are.
Base mount, low profile or horizontal
Base mount gives you pump, engine and skid with no receiver, for a truck body or trailer that already has storage. It is the lightest and cheapest way in and it only makes sense when air storage exists somewhere else, because without a receiver there is nothing to buffer a demand spike.
The 4 gallon twin tank is the truck mount answer. At 37.6 inches tall it fits under a service body lid where a 30 gallon horizontal at 45.5 inches does not. You give up storage and the ASME stamp for the height.
Where the price book contradicts itself
We publish Champion's printed August 2026 list without correcting it, so these are worth knowing before you compare two lines on the same quote.
- The 60 gallon 250 PSI receiver costs more than the 80 gallon one. Honda prints $4,444 at 60 gallon and $4,432 at 80; Kohler prints $4,580 and $4,570. Every other tank option in the book gets more expensive as the tank gets bigger.
- The whole 250 PSI receiver column on the Honda runs about 3 percent under the Kohler column for the same tank, $3,129 against $3,230 at 30 gallon. Nothing about the receiver differs by engine.
- On the diesels, the Yanmar 30 gallon tank coatings run about 3 percent under the Kohler equivalents, $1,924 against $1,990 for vinyl and $2,094 against $2,160 for galvanized, while the two engines' 80 gallon figures match exactly.
- Champion's price book gives the 9.1 HP Kohler diesel base model a 440 lb shipping weight. Champion's own engine drive bulletin gives it 400 lb. The 440 is what is loaded here because the price book is the pricing document, but use 400 if a freight quote comes back tight.
We have asked Fulton Associates, Champion's rep agency, about all four. If any of them turn out to be typos, the prices on this page move and we will say so.
Options and adders
Remote start and choke, vinyl lined and galvanized tanks, the 250 PSI receiver, domestic wood crating and the premium extended warranty kit are all factory line items, which means they go on the order with the machine rather than being added later. All twenty priced combinations are on the companion listing: Champion PL-Series engine driven factory-installed options and adders.
Two accessories ship loose and Champion prints them without a list price, so they are quote only: TEN003329, the remote choke and start kit with key switch, for the 14 HP Kohler CH440 engine only, and P12845A, the canvas cover for 30 gallon engine driven models.
Freight and ordering
Champion prepays freight on engine driven compressors when the order is over 400 pounds, which covers every tank model here and most base mounts once options go on. Shipping weights above are Champion's published estimates per configuration from the August 15, 2026 price list. Dimensions come from Champion's CR-ENG-DRIVE 7th edition 5/24 bulletin, because the price book publishes none.
Champion's order entry number is PL3-30-SIMPLEX-A for all sixteen, which does not distinguish one configuration from another. We pin the model number on every order we place so there is no ambiguity at the factory.
Three things people ask before ordering
Can I get the same machine with the splash lubricated pump for less? Yes, and if you will never run above 175 PSIG it is worth pricing. The R-Series engine driven range covers the same engines and tanks with the R15B pump, and it also goes up to 22 and 23.9 HP where the PL range stops at 14. What it cannot do is 250 PSI.
What does the premium extended warranty actually cover? It doubles the pump warranty to six years parts and labor, adds twenty four months to the package warranty, and includes the oil and filters for six years of annual maintenance. Champion requires its own lubricants to keep it in force. The governing document is Champion form BU-28.
How loud is it? Champion publishes no dB(A) figure for any engine driven unit in this range, and we are not going to invent one. On a gasoline engine driven compressor the engine dominates anyway, so the engine manufacturer's sound data is closer to the truth than anything we could quote for the package.
Buying from Warthog
We are an authorized Champion Pneumatic distributor and these are priced off the current August 15, 2026 list. Tell us the pressure you actually need at the tool, whether the site runs gas or diesel, and what the machine is mounted to, and we will tell you which of the sixteen fits. If 175 PSIG covers the job we will say so and quote you the cheaper R-Series instead.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.