Baldor-Reliance EM3313T 10 HP Three-Phase Open Drip-Proof Motor, 215T Frame, NEMA Premium
Baldor-Reliance EM3313T three-phase motor, 10 HP on a 215T steel frame, four pole, open drip-proof. Part of Baldor's NEMA Premium efficiency Super-E line at 91.7 percent nominal, with a 1.15 service factor, Class F insulation, a 1-3/8 in. shaft and a rigid steel base. Choose 230/460V for a standard three-phase supply or the 200V winding below.
Key specifications
- Catalog numbers: EM3313T (230/460V) and EM3313T-8 (200V)
- Output: 10 HP at 60 Hz, three phase
- Frame: 215T, steel
- Poles: 4, 1800 RPM synchronous
- Full load speed: 1768 RPM on EM3313T, 1770 RPM on EM3313T-8
- Full load amps: 25.4 at 230V, 12.7 at 460V, 28.0 at 208V on EM3313T; 29.5 at 200V, 30.3 at 208V on EM3313T-8
- Leads: nine 14 AWG flying leads on the dual-voltage EM3313T, three 10 AWG flying leads on the single-voltage EM3313T-8
- Enclosure: Baldor code OPSB, open drip-proof construction
- Efficiency: 91.7 percent NEMA nominal, NEMA Premium
- Service factor: 1.15. Service factor amps 28.8 and 14.4 on EM3313T, 33.3 on EM3313T-8
- Power factor: 81 on EM3313T, 80 on EM3313T-8
- Shaft diameter: 1.375 in.
- Mounting: F1 rigid base, direct on line start, reversible
- Insulation class: F, continuous duty, 40 C ambient
- NEMA design code B on EM3313T, design code A on EM3313T-8
- KVA code H on EM3313T, KVA code J on EM3313T-8
- Motor type 3738M on EM3313T, 3740M on EM3313T-8
- Bearings: 6307 drive end, 6206 opposite drive end, Polyrex EM grease
- Inverter ready, VPWM, constant torque 30 to 60 Hz, variable torque 3 to 60 Hz
- Overall length: 17.45 in.
- Agency: Baldor approval code CURUSEEV, NEMA Premium
- Ship weight: 128 lb on EM3313T, 129 lb on EM3313T-8
- RoHS compliant
Dual voltage against single voltage, read before ordering
The EM3313T is a nine lead dual-voltage machine that can be connected for either 230V or 460V. The EM3313T-8 is a three lead single voltage 200V machine and cannot be reconnected for 230V or 460V. Order the 200V version only if your service is genuinely 200 volts. The two also differ in NEMA design code, KVA code and Baldor motor type, so they are not the same motor with a different winding tag.
Speed rating note
Baldor rates the EM3313T at 1768 RPM full load. Most distributor listings print 1770 RPM, which is the figure for the 200V EM3313T-8, not for the dual-voltage unit. The speeds published above are Baldor's own.
Enclosure and duty
Baldor prints the enclosure as code OPSB and does not spell the code out. It is an open construction, not totally enclosed. Some marketplace listings describe motors in this family as TEFC, which is incorrect.
Baldor lists the EM3313T in its General Purpose product family. It is not a manufacturer designated compressor duty motor, and the word compressor does not appear anywhere in Baldor's documentation for it. Several resellers merchandise it under a compressor heading, which reflects their own categorization rather than Baldor's rating. Check full load amps and service factor against your load before specifying it.
Typical applications
Ten horsepower three phase on a 215T frame drives 10 HP reciprocating air compressor packages, larger pumps, blowers and dust collection fans, conveyors and process machinery. At 25.4 amps on 230V the feeder, disconnect and starter all need sizing from the nameplate, and the 1-3/8 in. shaft takes the heavier B section sheaves. Both windings are usable at 50 Hz at a derated 7.5 HP on 190/380V at a 1.0 service factor.
The Baldor-Reliance EM3313T gives you a 10 HP three-phase NEMA Premium open drip-proof motor on a 215T frame at 91.7 percent nominal efficiency, with a 1.15 service factor and a 1-3/8 in. shaft, in dual-voltage 230/460V and single-voltage 200V. Specifications above are taken from Baldor's published catalog and nameplate data for EM3313T and EM3313T-8.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
