Baldor-Reliance EM2513T 15 HP Three-Phase Open Drip-Proof Motor, 254T Frame, 1770 RPM, NEMA Premium
Baldor-Reliance EM2513T three-phase motor, 15 HP at 1770 RPM on a 254T steel frame, four pole, open drip-proof. Baldor's NEMA Premium efficiency Super-E line at 93.0 percent nominal, with a 1.15 service factor, Class F insulation, a 1-5/8 in. shaft and a rigid steel base. Choose 230/460V for a standard three-phase supply or the 200V winding below.
Key specifications
- Catalog numbers: EM2513T (230/460V) and EM2513T-8 (200V)
- Output: 15 HP at 60 Hz, three phase
- Frame: 254T, steel
- Poles: 4, 1800 RPM synchronous
- Full load speed: 1770 RPM on both windings
- Full load amps: 36.4 at 230V, 18.2 at 460V, 39.0 at 208V on EM2513T; 41.0 at 200V, 40.0 at 208V on EM2513T-8
- Leads: nine 12 AWG flying leads on the dual-voltage EM2513T, three 8 AWG flying leads on the single-voltage EM2513T-8
- Enclosure: Baldor code OPSB, open drip-proof construction
- Efficiency: 93.0 percent NEMA nominal, NEMA Premium
- Service factor: 1.15
- Power factor: 83 on EM2513T, 85 on EM2513T-8
- Shaft diameter: 1.625 in.
- Mounting: F1 rigid base, direct on line start, reversible
- Insulation class: F, continuous duty, 40 C ambient
- NEMA design code A on both windings
- KVA code J on EM2513T, KVA code H on EM2513T-8
- Motor type 3948M
- Bearings: 6309 drive end, 6208 opposite drive end, Polyrex EM grease
- Inverter ready, constant torque 30 to 60 Hz, variable torque 3 to 60 Hz
- Overall length: 23.19 in.
- Agency: Baldor approval code CURUSEEV, NEMA Premium
- Ship weight: 250 lb on EM2513T, 239 lb on EM2513T-8
Speed rating note
Baldor's catalog description line for this motor prints 1765 RPM, and almost every distributor repeats it. Baldor's own spec table, nameplate and performance curve header all say 1770 RPM. The nameplate figure is published here, because that is what is stamped on the motor you receive.
Dual voltage against single voltage, read before ordering
The EM2513T is a nine lead dual-voltage machine that can be connected for either 230V or 460V. The EM2513T-8 is a three lead single voltage 200V machine and cannot be reconnected for 230V or 460V. Order the 200V version only if your service is genuinely 200 volts.
NEMA design code note
Both windings are NEMA design A, not design B. Design A allows a higher locked rotor current at the same rating, so size the starter, overloads and upstream protection for it rather than assuming a design B inrush. Several distributor datasheets list these as design B, which contradicts Baldor's nameplate.
Enclosure and duty
Baldor prints the enclosure as code OPSB and does not spell the code out. It is an open construction, not totally enclosed. Some marketplace listings describe motors in this family as TEFC, which is incorrect.
Baldor lists the EM2513T in its General Purpose product family. It is not a manufacturer designated compressor duty motor. Check full load amps and service factor against your load before specifying it.
Typical applications
Fifteen horsepower on a 254T frame is a serious industrial drive: 15 HP reciprocating air compressor packages, large centrifugal pumps, blowers and dust collectors, crushers, mixers and process machinery. At 36.4 amps on 230V the feeder and switchgear are a real part of the install cost, and 93.0 percent NEMA Premium efficiency is where the running cost saving starts to be worth money on its own. The dual-voltage unit is usable at 50 Hz at 15 HP on 190/380V at a 1.0 service factor.
The Baldor-Reliance EM2513T gives you a 15 HP three-phase NEMA Premium open drip-proof motor on a 254T frame, 1770 RPM, 93.0 percent nominal efficiency, with a 1.15 service factor and a 1-5/8 in. shaft, in dual-voltage 230/460V and single-voltage 200V. Specifications above are taken from Baldor's published catalog and nameplate data for EM2513T and EM2513T-8.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
