ACS Single-Groove A-Section Cast Iron V-Belt Sheave, 2.2 to 5.95 in. OD
Single-groove, A-section cast iron V-belt sheaves in eleven fixed-bore sizes from 2.2 in. to 5.95 in. outside diameter. These are the driver sheaves that mount on an electric motor shaft in a belt drive, and they cross directly to the industry standard AK fixed-bore series.
How the size code reads
AirComParts writes these as 1A, then the nominal outside diameter in tenths of an inch, then the bore. So 1A22 x 5/8 is one groove, A-section, 2.20 in. outside diameter, 5/8 in. bore. Each size crosses to one AK part number, listed below.
Sizes and cross references
- 1A22 x 5/8 in. bore, 2.20 in. OD, 2.0 in. datum, crosses to AK22 x 5/8 (part J5500)
- 1A25 x 5/8 in. bore, 2.50 in. OD, 2.2 in. datum, crosses to AK25 x 5/8 (part J5505)
- 1A27 x 5/8 in. bore, 2.70 in. OD, 2.5 in. datum, crosses to AK27 x 5/8 (part J5510)
- 1A30 x 5/8 in. bore, 3.05 in. OD, 2.8 in. datum, crosses to AK30 x 5/8 (part J5515)
- 1A35 x 5/8 in. bore, 3.45 in. OD, 3.2 in. datum, crosses to AK34 x 5/8 (part J5520)
- 1A35 x 7/8 in. bore, 3.45 in. OD, 3.2 in. datum, crosses to AK34 x 7/8 (part J5525)
- 1A40 x 7/8 in. bore, 3.95 in. OD, 3.7 in. datum, crosses to AK41 x 7/8 (part J5530)
- 1A45 x 7/8 in. bore, 4.45 in. OD, 4.2 in. datum, crosses to AK46 x 7/8 (part J5535)
- 1A50 x 7/8 in. bore, 4.95 in. OD, 4.7 in. datum, crosses to AK51 x 7/8 (part J5540)
- 1A55 x 7/8 in. bore, 5.45 in. OD, 5.2 in. datum, crosses to AK56 x 7/8 (part J5545)
- 1A60 x 7/8 in. bore, 5.95 in. OD, 5.7 in. datum, crosses to AK61 x 7/8 (part J5550)
Key specifications
- Grooves: one
- Belt sections accepted: 3L, 4L, A and AX
- Material: gray cast iron, machined, statically balanced, painted
- Bore: fixed, bored to size, with keyway and one 5/16-18 UNC setscrew
- Bore sizes offered: 5/8 in. and 7/8 in.
- Outside diameters: 2.20, 2.50, 2.70, 3.05, 3.45, 3.95, 4.45, 4.95, 5.45 and 5.95 in.
- Maximum operating speed: not published by the manufacturer
Choosing a bore
The 5/8 in. bore matches a NEMA 48 or 56 frame motor shaft. The 7/8 in. bore matches a NEMA 143T or 145T motor shaft. Check the actual shaft diameter before ordering, since frame designation alone does not guarantee the shaft size on every motor.
Typical applications
Motor-side drive sheaves on belt-driven equipment: reciprocating air compressors, fractional and integral horsepower motor drives, blowers, air handlers and light machinery. On a belt-drive air compressor this is the sheave that mounts on the motor and drives the pump flywheel; the flywheel itself is a separate, larger OEM part.
These are general purpose AK-series sheaves rather than a compressor manufacturer's service part, so match the outside diameter, bore and belt section to your existing drive rather than to a compressor model number. If you are not sure which size you are replacing, measure the outside diameter of the old sheave and the motor shaft. Supplied by AirComParts as parts J5500 through J5550.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
