Champion 10 HP RV Series Splash Lubricated Electric Stationary Reciprocating Air Compressor
| Specifications (As Configured) | |
|---|---|
|
Champion
|
|
|
VRV10-12 208/230-3-O
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Gallons |
|
|
|
|
|
|
|
| Dimensions | |
|
895.0 lb
|
|
| Downloadable Files | |
Brochure PDFClick to Download
|
|
Brochure PDF |
|
The Champion RV Series 10 HP is a two stage, splash lubricated piston compressor for shops that have outgrown a 7.5 HP: body shops with two or three techs on the air at once, tire and lube bays, fabrication shops, farm equipment dealers and small manufacturing. It delivers 32 CFM at 175 PSI from an 1800 RPM pump on a 120 gallon receiver, with a mounted NEMA 1 magnetic starter and start/stop pressure switch control. Every version on this page is three phase; if you only have single phase service, the 7.5 HP RV Series is the largest Champion RV that runs on 230 V single phase.
Picking the right version
Tank. The VRV10-12 is a 120 gallon vertical, the smallest footprint for a 10 HP. The HRV10-12 is the same package on a 120 gallon horizontal receiver, which gives you a flat deck to mount a dryer and filters on and sits under a low ceiling.
Power. 208/230 V or 460 V three phase. The starter is already mounted and wired to the motor, so the electrician brings one feed to the starter and is done. Confirm the voltage before ordering; the motor and starter are built to order and cannot be swapped afterwards. A 10 HP three phase motor draws roughly 28 A at 230 V and 14 A at 460 V at full load, so plan the breaker and wire for that.
Options. The air cooled aftercooler drops the discharge temperature and knocks out most of the water before it reaches the tank, which cuts the load on your dryer and keeps the receiver drier. Low oil stop control shuts the compressor down before a low crankcase level damages the pump. Order either, both, or neither.
What to pair it with
For dry air at the tool, add a refrigerated dryer rated at 40 CFM or more, such as the Quincy QPNC 42 CFM or a cycling dryer if the load varies through the day, followed by a coalescing filter. A regulator at each drop brings 175 PSI tank air down to what the tool wants. An automatic tank drain such as the EZ-12 zero loss drain replaces the daily manual drain. Replacement filters, oil and parts are in the Champion collection. Need more air? The 15 HP RV Series makes 46.8 CFM, and the R-Series duplex gives you two pumps for redundancy. Compare every 10 HP compressor and every 30 CFM compressor we carry.
RV Series standard installed features
- Mounted NEMA 1 magnetic starter
- Tank mounted simplex with start/stop pressure switch control
- ASME coded receiver (except base mount models)
- 1800 RPM motor
- Intake filter and silencer
- Enclosed belt guard
- Loadless starting
- California code compliant receivers
Ordering notes
- Please confirm the voltage and phase when ordering.
- Freight prepaid on compressors when the order is over 400 pounds.
- Specific tank adders are required for Massachusetts. Please ask for pricing.
NOTE: Actual product may be different from pictured!
Financing Options
Financing Options
We offer Financing Through Many Different Avenues:
- Affirm is great for smaller purchases. You can do this during checkout.
- Clicklease is a great option for Instant decisions up to 25k. NO Hard credit pull. No Time in Business Required. More information can be found out about it here: https://www.clicklease.com/partner/warthog-air-compressor-store
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
AirCompressorStore.com offers a complete selection of air compressors, parts and accessories designed to keep your equipment running reliably and efficiently. Whether you’re servicing a small shop compressor, maintaining an industrial air system, or replacing a worn component in a production environment, our parts are sourced from trusted manufacturers and built to meet the demands of real-world compressed air applications.
Brochure PDF
Brochure PDF