{"product_id":"tam-19-40-lb-class-backfill-tamper-by-atlas-copco","title":"TAM 19 - 40 lb Class Backfill Tamper by Atlas Copco","description":"\u003ch2 data-start=\"364\" data-end=\"415\"\u003eTAM 19 - 40 lb Class Backfill Tamper by Atlas Copco\u003c\/h2\u003e\n\u003cp data-start=\"417\" data-end=\"859\"\u003eThe Atlas Copco TAM 19 is a 40 lb class pneumatic backfill tamper built for compacting soil, clay, and trench backfill in demanding construction, utility, foundation, and repair work. Designed for slow, powerful compaction blows, the TAM 19 gives operators the striking force needed to settle tough fill material while still keeping the tool compact enough for trench work, close-quarter compaction, and jobsite handling by a single operator.\u003c\/p\u003e\n\u003cp data-start=\"861\" data-end=\"1448\"\u003eThis air-powered tamper is a strong fit for crews working around foundations, utility lines, pole bases, road cuts, and other areas where loose backfill must be compacted thoroughly before the job can move forward. With a 780 BPM impact frequency, 41.8 lb operating weight, and 6.25 inch aluminum butt, the TAM 19 is built to deliver controlled, repetitive force into the ground instead of relying on high-speed surface vibration alone. That makes it especially useful when working with clay, mixed soil, and finely crushed or powdered material that needs firm, consistent consolidation.\u003c\/p\u003e\n\u003ch3 data-start=\"1450\" data-end=\"1517\"\u003eHeavy-Duty Pneumatic Backfill Tamper for Soil and Trench Compaction\u003c\/h3\u003e\n\u003cp data-start=\"1519\" data-end=\"1907\"\u003eThe TAM 19 is made for real backfill work. Atlas Copco lists this tamper for compacting soil around foundations and other structures, as well as compacting backfill in trenches. Its 40 lb class body gives it enough mass to drive force downward into the material, while the long handle and inline design help the operator keep the tool positioned accurately in narrow or uneven work areas.\u003c\/p\u003e\n\u003ch3 data-start=\"1909\" data-end=\"1937\"\u003eCommon applications include:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"1939\" data-end=\"1980\"\u003eCompacting backfill in utility trenches\u003c\/li\u003e\n\u003cli data-start=\"1982\" data-end=\"2038\"\u003eCompacting soil around foundations and structural work\u003c\/li\u003e\n\u003cli data-start=\"2040\" data-end=\"2089\"\u003eSettling fill around posts, poles, and supports\u003c\/li\u003e\n\u003cli data-start=\"2091\" data-end=\"2147\"\u003eRepair work after pipe, conduit, or cable installation\u003c\/li\u003e\n\u003cli data-start=\"2149\" data-end=\"2202\"\u003eSoil compaction in confined or hard-to-reach spaces\u003c\/li\u003e\n\u003cli data-start=\"2204\" data-end=\"2261\"\u003eWorking with clay, crushed material, and mixed backfill\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-start=\"2263\" data-end=\"2464\"\u003eThe TAM 19 is not a light-duty shop tool dressed up for construction use. It is a purpose-built Atlas Copco pneumatic tamper made for crews that need repeatable compaction power from a rugged air tool.\u003c\/p\u003e\n\u003ch3 data-start=\"2466\" data-end=\"2491\"\u003eKey Features and Benefits\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e40 lb class pneumatic tamper design for heavy backfill compaction\u003c\/li\u003e\n\u003cli\u003e780 BPM impact frequency for slow, powerful, controlled blows\u003c\/li\u003e\n\u003cli\u003e6.25 inch aluminum butt for broad, effective ground contact\u003c\/li\u003e\n\u003cli\u003e41.8 lb operating weight for strong downward compaction force\u003c\/li\u003e\n\u003cli\u003e50 inch overall length for comfortable standing operation\u003c\/li\u003e\n\u003cli\u003e27.5 CFM air consumption for use with properly sized jobsite compressed air systems\u003c\/li\u003e\n\u003cli\u003eHeat-treated cylinder for long service life in rough operating conditions\u003c\/li\u003e\n\u003cli\u003eChrome-plated piston to help reduce wear and extend tool durability\u003c\/li\u003e\n\u003cli\u003eClamp screw butt retention for fast, straightforward butt replacement\u003c\/li\u003e\n\u003cli\u003eExhaust deflector directs air, oil, and moisture away from the operator\u003c\/li\u003e\n\u003cli\u003eIntegral oiler provides continuous lubrication during operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"3266\" data-end=\"3315\"\u003eBuilt for Tough Soil, Clay, and Backfill Material\u003c\/h3\u003e\n\u003cp data-start=\"3317\" data-end=\"3685\"\u003eBackfill compaction is rarely clean, easy work. Trenches can be narrow, fill material can be inconsistent, and clay-heavy soil can resist shallow compaction. The Atlas Copco TAM 19 is designed around slow, powerful impacts that help compact a wide range of backfill materials, including clay and soil containing high percentages of finely crushed or powdered material.\u003c\/p\u003e\n\u003cp data-start=\"3687\" data-end=\"4055\"\u003eThe 6.25 inch aluminum butt gives the tool a wide tamping surface, helping spread impact force across the work area while still concentrating enough energy to drive compaction downward. For crews handling trench closure, pipe installation, foundation repair, and municipal utility work, this design gives the TAM 19 the right balance of size, weight, and impact force.\u003c\/p\u003e\n\u003ch3 data-start=\"4057\" data-end=\"4093\"\u003eDurable Construction for Jobsite Use\u003c\/h3\u003e\n\u003cp data-start=\"4095\" data-end=\"4424\"\u003eThe TAM 19 uses a heat-treated cylinder and chrome-plated piston, two important durability features for pneumatic tools exposed to dirt, moisture, vibration, and repeated impact cycles. These components help the tamper hold up under regular field use and reduce premature wear when the tool is properly lubricated and maintained.\u003c\/p\u003e\n\u003cp data-start=\"4426\" data-end=\"4826\"\u003eAtlas Copco also equips the TAM 19 with an integral oiler for continuous lubrication. That matters on jobs where the tool may run for extended periods and where consistent internal lubrication is needed to protect moving parts. The exhaust deflector helps keep discharged air, moisture, and oil pointed away from the operator, making the tool more practical to use in daily construction environments.\u003c\/p\u003e\n\u003ch3 data-start=\"4828\" data-end=\"4849\"\u003eTAM 19 Specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli data-start=\"4851\" data-end=\"4876\"\u003eModel: Atlas Copco TAM 19\u003c\/li\u003e\n\u003cli data-start=\"4878\" data-end=\"4907\"\u003eSKU \/ Part Number: 8461025015\u003c\/li\u003e\n\u003cli data-start=\"4909\" data-end=\"4945\"\u003eTool Type: Pneumatic Backfill Tamper\u003c\/li\u003e\n\u003cli data-start=\"4947\" data-end=\"4965\"\u003eClass: 40 lb Class\u003c\/li\u003e\n\u003cli data-start=\"4967\" data-end=\"4982\"\u003eWeight: 41.8 lb\u003c\/li\u003e\n\u003cli data-start=\"4984\" data-end=\"4997\"\u003eLength: 50 in\u003c\/li\u003e\n\u003cli data-start=\"4999\" data-end=\"5021\"\u003eBody Diameter: 3.87 in\u003c\/li\u003e\n\u003cli data-start=\"5023\" data-end=\"5055\"\u003eButt Size: 6.25 in Aluminum Butt\u003c\/li\u003e\n\u003cli data-start=\"5057\" data-end=\"5091\"\u003eAir Consumption: 13 l\/s \/ 27.5 CFM\u003c\/li\u003e\n\u003cli data-start=\"5093\" data-end=\"5118\"\u003eImpact Frequency: 780 BPM\u003c\/li\u003e\n\u003cli data-start=\"5120\" data-end=\"5154\"\u003eVibration Level, 3 Axes: 44.8 m\/s²\u003c\/li\u003e\n\u003cli data-start=\"5156\" data-end=\"5186\"\u003eSound Pressure Level: 94 dB(A)\u003c\/li\u003e\n\u003cli data-start=\"5188\" data-end=\"5210\"\u003eHose Connection: 19 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-start=\"5212\" data-end=\"5246\"\u003eWhy Choose the Atlas Copco TAM 19?\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eStrong compaction performance: The TAM 19 is built for slow, powerful tamping blows that are effective on trench backfill, clay, and mixed fill.\u003c\/li\u003e\n\u003cli\u003ePractical 40 lb class size: At 41.8 lb, it has enough weight for real compaction without becoming oversized for trench and foundation work.\u003c\/li\u003e\n\u003cli\u003eRugged internal components: The heat-treated cylinder and chrome-plated piston are designed to support longer tool life.\u003c\/li\u003e\n\u003cli\u003eOperator-focused design: The exhaust deflector, standing operating length, and single-person handling make the tool easier to manage on active jobsites.\u003c\/li\u003e\n\u003cli\u003eFast butt replacement: The aluminum butt is held with a clamp screw, allowing quicker replacement when wear parts need attention.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3 data-start=\"5957\" data-end=\"5990\"\u003eReady for Demanding Backfill Work\u003c\/h3\u003e\n\u003cp data-start=\"5992\" data-end=\"6392\"\u003eThe Atlas Copco TAM 19 - 40 lb Class Backfill Tamper is a professional pneumatic tamper for crews that need dependable soil compaction in trenches, around foundations, and across tough backfill conditions. With a 780 BPM impact frequency, 6.25 inch aluminum butt, 27.5 CFM air demand, and durable Atlas Copco construction, the TAM 19 is built for reliable performance where proper compaction matters.\u003c\/p\u003e","brand":"Atlas Copco","offers":[{"title":"Default Title","offer_id":54067150979347,"sku":"8461025015","price":1526.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/TAM_19.png?v=1776878987","url":"https:\/\/aircompressorstore.com\/products\/tam-19-40-lb-class-backfill-tamper-by-atlas-copco","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}