{"product_id":"packard-titan-pro-motor-start-capacitor-220-250-vac-round","title":"Packard Titan Pro Motor Start Capacitor, 220-250 VAC, Round","description":"\u003cp\u003ePackard Titan Pro round motor start capacitors rated 220-250 VAC, for 230V single-phase compressor, pump and HVAC motors. The start capacitor is what gives a single-phase motor its breakaway torque against head pressure. It is wired in series with the start winding and dropped out of circuit by a potential or current relay, or a centrifugal switch, a second or two after the motor comes up to speed.\u003c\/p\u003e\n\u003cp\u003eIf a 230V single-phase compressor hums, pulls heavy current and will not turn over, a failed start capacitor is the first thing to check.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e dry electrolytic, non-polarized motor \u003cstrong\u003estart\u003c\/strong\u003e capacitor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 220-250 VAC, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase:\u003c\/strong\u003e round, black molded phenolic, moisture and oil resistant, with a pressure-sensitive vent in the base\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e two terminal posts, each carrying two 1\/4 in. male quick-connect blades (four blades total)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -40 °C to +65 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDuty:\u003c\/strong\u003e intermittent, rated for a 3 second start and up to 20 starts per hour\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e meets or exceeds EIA RS-463 Type 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApprovals:\u003c\/strong\u003e UL Recognized Component, cUL, CSA C22.2 No. 190\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Titan Pro, Packard's own capacitor line. Made in China\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eRatings and case sizes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e161-193 MFD (TTMJ161):\u003c\/strong\u003e 2-1\/16 in. diameter x 3-3\/8 in. high. Supersedes Packard PTMJ161\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e216-259 MFD (TTMJ216):\u003c\/strong\u003e 2-1\/16 in. x 3-3\/8 in. Supersedes PTMJ216\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e270-324 MFD (TTMJ270):\u003c\/strong\u003e 2-1\/16 in. x 3-3\/8 in. Supersedes PTMJ270\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e400-480 MFD (TTMJ400):\u003c\/strong\u003e 2-1\/16 in. x 4-3\/8 in. Supersedes PTMJ400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e430-516 MFD (TTMJ430):\u003c\/strong\u003e 2-9\/16 in. x 4-3\/8 in. Supersedes PTMJ430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e630-750 MFD (TTMJ630):\u003c\/strong\u003e 2-9\/16 in. x 4-3\/8 in. Supersedes PTMJ630\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCase heights exclude the terminals. Allow roughly another 1\/2 in. of clearance above the can when fitting one into a tight terminal box. Packard also builds several of these ratings in an alternate taller can, marked with an A suffix. The electrical rating is identical; only the can dimensions change. If your enclosure is tight in one direction and roomy in the other, ask us and we will check which can fits.\u003c\/p\u003e\n\u003ch3\u003eWhy start capacitors carry a MFD range\u003c\/h3\u003e\n\u003cp\u003eA start capacitor is specified as a range, such as 161-193 MFD, rather than a single value. Electrolytic capacitors have a wide manufacturing tolerance and the value drifts over life, so the range is the specification. Run capacitors, which stay in circuit continuously, are specified as a single value with a tight tolerance instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNever substitute a run capacitor for a start capacitor, or the reverse.\u003c\/strong\u003e They are different constructions with different duty ratings, and getting it wrong will destroy the capacitor and can damage the motor winding. Match the MFD range and the voltage rating on the old capacitor. You may fit a capacitor with a higher voltage rating than the original, but never a lower one.\u003c\/p\u003e\n\u003ch3\u003eSafety\u003c\/h3\u003e\n\u003cp\u003eA capacitor stores charge after the power is removed. Isolate the equipment, wait, and discharge the capacitor across a resistor before touching the terminals. Replace any capacitor that is swollen, leaking or has a bulged base.\u003c\/p\u003e\n\u003cp\u003eNot sure which rating you need? Send us a photo of the old capacitor or the motor nameplate and the Warthog Air Compressor Store team will match it.\u003c\/p\u003e","brand":"AirComParts","offers":[{"title":"161-193 MFD (TTMJ161)","offer_id":67649876328723,"sku":"J6415","price":11.79,"currency_code":"USD","in_stock":true},{"title":"216-259 MFD (TTMJ216)","offer_id":67649876361491,"sku":"J6420","price":14.89,"currency_code":"USD","in_stock":true},{"title":"270-324 MFD (TTMJ270)","offer_id":67649876394259,"sku":"J6425","price":19.29,"currency_code":"USD","in_stock":true},{"title":"400-480 MFD (TTMJ400)","offer_id":67649876427027,"sku":"J6430","price":34.69,"currency_code":"USD","in_stock":true},{"title":"430-516 MFD (TTMJ430)","offer_id":67649876459795,"sku":"J6435","price":36.39,"currency_code":"USD","in_stock":true},{"title":"630-750 MFD (TTMJ630)","offer_id":67649876492563,"sku":"J6438","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/packard-titan-pro-start-capacitor-250v.jpg?v=1791891333","url":"https:\/\/aircompressorstore.com\/products\/packard-titan-pro-motor-start-capacitor-220-250-vac-round","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}