{"product_id":"maska-ma-single-groove-cast-iron-v-belt-pulley-fixed-bore","title":"Maska MA Single-Groove Cast Iron V-Belt Pulley, Fixed Bore, 3.95 and 4.95 in. OD","description":"\u003cp\u003eMaska MA series single-groove cast iron pulley for A section V-belts and for 3L and 4L fractional horsepower belts. These are finished bore pulleys, bored and keyed at the factory with set screws, so there is no bushing to buy and nothing to assemble. Pick the outside diameter and the bore that matches your shaft.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSingle groove, A section V-belts (also 3L and 4L)\u003c\/li\u003e\n\u003cli\u003eCast iron construction\u003c\/li\u003e\n\u003cli\u003eFixed finished bore with keyway and set screws, no bushing required\u003c\/li\u003e\n\u003cli\u003eFace width 3\/4 in., overall length 1-3\/8 in.\u003c\/li\u003e\n\u003cli\u003eLight duty service\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSizes and diameters\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMA40: 3.95 in. OD, 3.61 in. 3L pitch dia., 3.95 in. 4L pitch dia., 3.7 in. A section datum dia., 1.85 lb. Available in 5\/8 in. and 3\/4 in. bore.\u003c\/li\u003e\n\u003cli\u003eMA50: 4.95 in. OD, 4.61 in. 3L pitch dia., 4.95 in. 4L pitch dia., 4.7 in. A section datum dia., 2.30 lb. Available in 3\/4 in. bore.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCross references\u003c\/h3\u003e\n\u003cp\u003eThe MA40 interchanges with the industry \u003cstrong\u003eAK41\u003c\/strong\u003e and the MA50 with the \u003cstrong\u003eAK51\u003c\/strong\u003e, matched on outside diameter: AK41 is 3.95 in. and AK51 is 4.95 in. Equivalents are listed by Browning, Martin, TB Wood's and Continental under those AK numbers. Maska was acquired by Baldor Electric in 2008 and the MA part numbers are carried by several distributors under both the Maska and the Dodge labels, so an MA40 and a Dodge MA40 in the same bore are the same part number.\u003c\/p\u003e\n\u003ch3\u003ePitch diameter convention\u003c\/h3\u003e\n\u003cp\u003eMaska publishes a 3L and a 4L pitch diameter for these pulleys, where the 4L figure equals the outside diameter. Other catalogs publish a single A section datum diameter instead, which is a different number for the same pulley. Both figures are given above so you can match whichever convention your existing drive data uses.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eSingle-groove A section pulleys in the 4 to 5 in. range are the everyday motor pulley on small reciprocating air compressors, bench grinders, blowers, small pumps, farm equipment and shop machinery. Because the bore is finished rather than bushed, installation is a matter of sliding it onto the shaft, setting the key and tightening the set screws, which makes them the quick answer for a 5\/8 in. or 3\/4 in. motor shaft.\u003c\/p\u003e\n\u003cp\u003eThis Maska MA single-groove cast iron V-belt pulley is stocked in 3.95 in. and 4.95 in. outside diameters with 5\/8 in. and 3\/4 in. finished bores, for A, 3L and 4L belts, cross referenced to AK41 and AK51.\u003c\/p\u003e","brand":"AirComParts","offers":[{"title":"MA40 x 5\/8 in. bore, 3.95 in. OD","offer_id":67645336158483,"sku":"J6085","price":34.49,"currency_code":"USD","in_stock":true},{"title":"MA40 x 3\/4 in. bore, 3.95 in. OD","offer_id":67645336191251,"sku":"J6080","price":34.49,"currency_code":"USD","in_stock":true},{"title":"MA50 x 3\/4 in. bore, 4.95 in. OD","offer_id":67645336224019,"sku":"J6090","price":48.19,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/sq2-pulley1.jpg?v=1794250976","url":"https:\/\/aircompressorstore.com\/products\/maska-ma-single-groove-cast-iron-v-belt-pulley-fixed-bore","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}