{"product_id":"baldor-em2535t-30-hp-three-phase-odp-motor-286t-1775-rpm","title":"Baldor-Reliance EM2535T 30 HP Three-Phase Open Drip-Proof Motor, 286T Frame, 1775 RPM, NEMA Premium","description":"\u003cp\u003eThe Baldor-Reliance EM2535T is a 30 HP three-phase open drip-proof motor on a 286T rigid-base frame, turning 1775 RPM at 60 Hz with a NEMA Premium efficiency rating of 94.1 percent. Both the standard 230\/460V winding and the 200V winding (EM2535T-8) share the 286T frame, the 1-7\/8 in. shaft and the same bearings, so either drops into the same mounting and coupling.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note:\u003c\/strong\u003e Baldor lists this motor under its General Purpose product family. It is not a manufacturer-designated compressor-duty motor. It suits compressor, pump, fan and general industrial service within its 1.15 service factor.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 30 HP, 4 pole, 60 Hz, 1775 RPM nameplate speed (1800 RPM synchronous)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrame:\u003c\/strong\u003e NEMA 286T, steel frame, rigid base, F1 mounting, reversible\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage and current:\u003c\/strong\u003e 230\/460V at 74\/37 A (EM2535T) or 200V at 83 A (EM2535T-8), three phase\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEfficiency:\u003c\/strong\u003e 94.1 percent NEMA nominal, NEMA Premium rated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e 80 (230\/460V) or 82 (200V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eService factor:\u003c\/strong\u003e 1.15  |  \u003cstrong\u003eNEMA design code:\u003c\/strong\u003e A  |  \u003cstrong\u003eKVA code:\u003c\/strong\u003e H\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnclosure:\u003c\/strong\u003e OPSB open drip-proof, Class F insulation, 40 °C ambient, continuous duty\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShaft:\u003c\/strong\u003e 1.875 in. diameter  |  \u003cstrong\u003eBearings:\u003c\/strong\u003e 6311 drive end, 6309 opposite drive end, ball, Polyrex EM grease\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 26.06 in. overall length, approx. 378 lb shipping weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnections:\u003c\/strong\u003e KO box, flying leads, standard lifting lugs. Inverter ready\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlso:\u003c\/strong\u003e nameplate usable at 50 Hz, 30 HP, 190\/380V, 86\/43 A at SF 1.0 (230\/460V unit)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes on the two windings\u003c\/h3\u003e\n\u003cp\u003eThe 230\/460V unit is a direct-on-line start. Baldor's specification table lists the 200V unit as part-winding start with six 6 AWG leads while its performance data lists the same motor as DOL, so confirm against the nameplate if your starter selection depends on that. Two further points where Baldor's own published data disagrees with itself on the EM2535T-8: the specification table prints the enclosure as ODP while the nameplate reads OPSB, and the description line ends in mounting code N while the specification table correctly gives F1 for a rigid-base motor. The nameplate and specification values are the ones published above.\u003c\/p\u003e\n\u003cp\u003eBaldor also prints a 278 lb shipping weight for the EM2535T-8 against 378 lb for the otherwise identical EM2535T, on the same frame, same motor type and same overall length. We publish 378 lb for both. If exact shipping weight matters for your freight quote, ask us and we will confirm before the order ships.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eReciprocating and rotary screw air compressors, centrifugal and positive displacement pumps, blowers and fans, conveyors and general industrial drives in clean, dry indoor environments. An open drip-proof enclosure is not suitable for wet, dusty or washdown locations; specify a TEFC motor for those.\u003c\/p\u003e\n\u003cp\u003eSupplied as a Baldor-Reliance Super-E series motor with NEMA Premium agency approval. Motors this size ship by freight. Call the Warthog Air Compressor Store team for help matching a replacement to an existing nameplate or sizing a starter for a 30 HP three-phase compressor.\u003c\/p\u003e","brand":"AirComParts","offers":[{"title":"230\/460V (EM2535T)","offer_id":67649864204563,"sku":"J6150","price":3944.99,"currency_code":"USD","in_stock":true},{"title":"200V (EM2535T-8)","offer_id":67649864237331,"sku":"J6151","price":3944.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/Baldor_EM3116T_d13de4ab-dfdf-41b7-b953-6509e88124fe.png?v=1791805566","url":"https:\/\/aircompressorstore.com\/products\/baldor-em2535t-30-hp-three-phase-odp-motor-286t-1775-rpm","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}