{"product_id":"aircomparts-k25h123-25-hp-120-gallon-horizontal-two-stage-air-compressor","title":"AirComParts K25H123 25 HP Two-Stage Air Compressor - 120 Gallon Horizontal, 175 PSI, 81.5 CFM, 462 Kellogg-Equivalent Pump, 3-Phase","description":"\u003cp\u003eThe AirComParts K25H123 is a 25 HP three-phase two-stage reciprocating air compressor on a 120 gallon horizontal ASME tank, driven by the 462 pump that cross-references to the Kellogg-American 462. At 81.5 CFM delivered at 175 PSI it is the largest single-pump machine in the K-Series range and the point at which a reciprocating compressor is genuinely running a plant rather than a shop.\u003c\/p\u003e\n\u003cp\u003eTwo-stage compression squeezes the air twice, with an intercooler between the low-pressure and high-pressure cylinders, so the pump reaches a full 175 PSI without the heat and wear a single-stage pump takes to get there. The horizontal tank keeps overall height down under a mezzanine or an overhead crane.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHorsepower:\u003c\/strong\u003e 25 HP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePump:\u003c\/strong\u003e 462, two-stage, belt driven, Kellogg-American 462 equivalent\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDelivery:\u003c\/strong\u003e 81.5 CFM at 175 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum pressure:\u003c\/strong\u003e 175 PSI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTank:\u003c\/strong\u003e 120 gallon horizontal, ASME coded, made in the USA, supplied with safety valve and drain valve\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1,800 lb. Add approximately 200 lb for crated shipping weight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvailable power:\u003c\/strong\u003e 208V, 230V or 460V, three phase only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow oil switch:\u003c\/strong\u003e included as standard on every 15 to 25 HP K-Series unit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBelt guard:\u003c\/strong\u003e all metal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoosing your configuration\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBasic Unit\u003c\/strong\u003e includes the pump, belt guard, ASME tank and electric motor. It \u003cstrong\u003edoes not include the motor starter\u003c\/strong\u003e, which an industrial motor requires for proper cycling.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWith Starter Unit\u003c\/strong\u003e adds a motor starter, mounted and wired ready for use.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Unit\u003c\/strong\u003e adds the mounted motor starter plus a beltguard-mounted aftercooler and an automatic tank drain.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA machine pushing 81.5 CFM carries a great deal of water into the system with it. The aftercooler on the Package Unit cools the discharge air and removes roughly 75 percent of its moisture before it reaches the tank, and the automatic tank drain clears the condensate that does collect without anyone having to remember to crack the drain valve. At this size a 120 gallon receiver is modest relative to the pump output, so a separate downstream receiver is worth considering to smooth demand peaks and give the air somewhere to cool and drop its water.\u003c\/p\u003e\n\u003ch3\u003eLow oil protection\u003c\/h3\u003e\n\u003cp\u003eEvery 15 to 25 HP K-Series unit carries a low oil switch as standard equipment. On a 462 pump a dry crankcase is a scrapped pump, so the switch is the single most valuable piece of protection on the machine.\u003c\/p\u003e\n\u003ch3\u003eWhy the three-phase Basic Unit covers two voltages\u003c\/h3\u003e\n\u003cp\u003eThe 230V and 460V Basic Units share one part number, K2010, because the motor is dual-voltage 230\/460V and the starter, which fixes the supply voltage, is not part of a Basic Unit. The 208V Basic Unit, K20108, is a separate part number. On the With Starter and Package configurations every voltage has its own part number because the starter is matched to the supply.\u003c\/p\u003e\n\u003cp\u003eThe AirComParts K25H123 pairs a 25 HP three-phase motor with a 175 PSI two-stage 462 pump and a 120 gallon horizontal ASME tank, in Basic, With Starter and full Package configurations at 208V, 230V and 460V. The 15 HP K15H123 and 20 HP K20H123 share the same pump and tank if you need to step down. Tell us your demand profile and the Warthog Air Compressor Store team will size it with you.\u003c\/p\u003e","brand":"AirComParts","offers":[{"title":"Basic Unit (no starter) \/ 208V 3-Phase","offer_id":67659185324307,"sku":"K20108","price":11624.0,"currency_code":"USD","in_stock":true},{"title":"Basic Unit (no starter) \/ 230\/460V 3-Phase","offer_id":67659185357075,"sku":"K2010","price":11985.0,"currency_code":"USD","in_stock":true},{"title":"With Starter \/ 208V 3-Phase","offer_id":67659185389843,"sku":"K1528","price":12603.0,"currency_code":"USD","in_stock":true},{"title":"With Starter \/ 230V 3-Phase","offer_id":67659185422611,"sku":"K1529","price":12964.0,"currency_code":"USD","in_stock":true},{"title":"With Starter \/ 460V 3-Phase","offer_id":67659185455379,"sku":"K1530","price":12704.0,"currency_code":"USD","in_stock":true},{"title":"Package Unit (starter + aftercooler + auto drain) \/ 208V 3-Phase","offer_id":67659185488147,"sku":"K2036","price":14185.0,"currency_code":"USD","in_stock":true},{"title":"Package Unit (starter + aftercooler + auto drain) \/ 230V 3-Phase","offer_id":67659185520915,"sku":"K2046","price":14546.0,"currency_code":"USD","in_stock":true},{"title":"Package Unit (starter + aftercooler + auto drain) \/ 460V 3-Phase","offer_id":67659185553683,"sku":"K2047","price":14285.0,"currency_code":"USD","in_stock":true}],"url":"https:\/\/aircompressorstore.com\/products\/aircomparts-k25h123-25-hp-120-gallon-horizontal-two-stage-air-compressor","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}