{"product_id":"abac-cool-250-refrigerated-air-dryer-230v","title":"ABAC COOL 250 Refrigerated Air Dryer - 188 PSI Max, R-404A, 230V Single-Phase","description":"\u003cp\u003eThe ABAC COOL 250 is a refrigerated air dryer that pulls moisture out of compressed air before it reaches your tools, air lines and finishing work. It is the largest COOL dryer in our range, sized for a shop running a large rotary screw or a duplex piston system, and it runs on 230V 60 Hz single phase power, so it goes in behind a big air system without a three phase feed. It pipes in through 1-1\/2 inch NPT female connections and draws 1,102 W.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: COOL 250, ABAC type C9 (part number 4102006322)\u003c\/li\u003e\n\u003cli\u003eType: refrigerated compressed air dryer, hot gas bypass design, vertical cabinet\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 188 PSI (13 bar)\u003c\/li\u003e\n\u003cli\u003ePressure dew point: 45 F (7 C), held above 32 F by the hot gas bypass so the evaporator cannot freeze\u003c\/li\u003e\n\u003cli\u003ePower supply: 230V, 60 Hz, single phase\u003c\/li\u003e\n\u003cli\u003eNominal electrical power at 60 Hz: 1,102 W total, made up of a 1,007 W refrigerant compressor and a 95 W condenser fan\u003c\/li\u003e\n\u003cli\u003eRefrigerant: R-404A, 1.05 kg (2.3 lb) charge\u003c\/li\u003e\n\u003cli\u003eInlet and outlet connections: 1-1\/2 inch NPT female\u003c\/li\u003e\n\u003cli\u003eWeight: 156 lbs (71 kg)\u003c\/li\u003e\n\u003cli\u003eDimensions: 12.2 x 27.8 x 39.1 in (310 x 706 x 994 mm)\u003c\/li\u003e\n\u003cli\u003eRoom temperature range: 41 F to 104 F (5 C to 40 C)\u003c\/li\u003e\n\u003cli\u003eIncoming air temperature: 50 F minimum, 122 F (50 C) maximum\u003c\/li\u003e\n\u003cli\u003eCondensate removal: automatic timer drain\u003c\/li\u003e\n\u003cli\u003eMonitoring: front panel pressure dew point indicator with green target zone, stop and run button\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and body shops, cabinet and woodworking shops, production cells, laser and plasma tables, packaging lines, injection molding, pneumatic control systems, tire inflation benches, and any shop where water in the air line is blowing out finishes, rusting tools and fittings, or freezing an outdoor drop in winter. A refrigerated dryer chills the compressed air so the water condenses, drains it away, and sends dry air down the line, which is the most straightforward way to stop moisture damage downstream of a compressor.\u003c\/p\u003e\u003ch3\u003eHow the COOL range works\u003c\/h3\u003e\u003cp\u003eABAC builds the COOL range around a combined air to air and air to refrigerant heat exchanger with an integrated water separator, a hot gas bypass valve that holds refrigeration capacity steady across load conditions and keeps the evaporator from freezing, a capillary tube and refrigerant filter on the cooling circuit, a refrigerant compressor protected against thermal overload, an air cooled condenser, a timer drain that clears condensate on its own, and a front panel dew point indicator with a green target zone so you can read air quality at a glance. ABAC rates the COOL range for a 45 degree F (7 degree C) pressure dew point, which it notes covers more than 95 percent of industrial compressed air applications. The vertical cabinet layout keeps the footprint small and leaves the serviceable parts reachable from the front.\u003c\/p\u003e\u003ch3\u003eService and running cost\u003c\/h3\u003e\u003cp\u003eThe COOL 250 carries a sealed R-404A circuit with a 1.05 kg (2.3 lb) charge and draws 1,102 W at 60 Hz, which is 1,007 W for the refrigerant compressor and 95 W for the condenser fan. There is no desiccant to replace and no purge air lost to regeneration, which is the running cost that separates a refrigerated dryer from a desiccant one, so a dryer this size stays cheap to leave running alongside the compressor. Routine upkeep is keeping the air cooled condenser clear of dust so it can reject heat, checking that the timer drain is actually discharging, and leaving clearance around the cabinet for airflow. The hot gas bypass valve is factory set and is not a field adjustment, so a dew point reading outside the green zone usually points to a dirty condenser, a hot room, or incoming air above the 122 F limit rather than to the valve.\u003c\/p\u003e\u003ch3\u003eSizing and installation\u003c\/h3\u003e\u003cp\u003eSize the dryer to the compressor it follows, not to the pipe it bolts into. The COOL 250 sits at the top of the COOL line, intended for shops running a large rotary screw or a duplex piston system that has outgrown a COOL 200, so step up to it when a smaller unit is running at its limit.\u003c\/p\u003e\u003cp\u003eABAC publishes the COOL ratings at reference conditions of 101 PSI (7 bar) working pressure, 95 F (35 C) inlet air and a 77 F (25 C) room, and real conditions move the number. Capacity drops as the room gets hotter and drops harder as incoming air gets hotter, so a dryer sitting in a hot room or close to a compressor discharge will not hold its rating. Higher line pressure works the other way and recovers a little capacity. If the dryer has to live near the compressor, fit an aftercooler ahead of it, keep the room between 41 F and 104 F, and keep incoming air below 122 F and above 50 F. Give the condenser clear airflow and keep the unit out of the heat the compressor throws off.\u003c\/p\u003e\u003ch3\u003eHow it compares and what to pair it with\u003c\/h3\u003e\u003cp\u003ePressure rating is the first thing to check against your system. The \u003ca href=\"\/products\/abac-cool-125-refrigerated-air-dryer-230v\"\u003eCOOL 125\u003c\/a\u003e is rated to 232 PSI, while the \u003ca href=\"\/products\/abac-cool-150-refrigerated-air-dryer-230v\"\u003eCOOL 150\u003c\/a\u003e, the \u003ca href=\"\/products\/abac-cool-200-refrigerated-air-dryer-230v\"\u003eCOOL 200\u003c\/a\u003e and this COOL 250 are rated to 188 PSI, so if your system regularly sits above 188 PSI, size around that ceiling rather than around flow alone. The COOL 250 is the largest of the three and the heaviest at 156 lbs, on the same 12 x 28 x 39 inch cabinet footprint as the 150 and the 200. All three run on 230V single phase power, so moving up the range does not mean running a new three phase feed.\u003c\/p\u003e\u003cp\u003ePair it with a \u003ca href=\"\/collections\/coalescing-air-filters\"\u003ecoalescing filter\u003c\/a\u003e upstream for oil carryover and a \u003ca href=\"\/collections\/particulate-removal-filters\"\u003eparticulate filter\u003c\/a\u003e downstream when the work calls for cleaner air, and give the condensate somewhere to go. See the rest of the \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e and our full \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e lineup, or the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e this size of dryer is most often paired with. Call us for the published COOL 250 flow rating and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V","offer_id":67621294604563,"sku":"4102006322","price":3849.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/sq3-cool250.jpg?v=1794251278","url":"https:\/\/aircompressorstore.com\/products\/abac-cool-250-refrigerated-air-dryer-230v","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}