{"title":"Compressed Air Moisture Separators","description":"\u003ch2\u003eCompressed Air Moisture Separators\u003c\/h2\u003e\n\u003cp\u003eMechanical and centrifugal moisture separators remove bulk liquid water and condensate from compressed air before it reaches your dryer and filters. Installed at the compressor discharge or aftercooler outlet, a separator strips out the liquid that would otherwise flood a coalescing element or damage a desiccant bed, and it does it with almost no pressure drop and no consumable media.\u003c\/p\u003e\n\u003cp\u003eThe distinction that trips people up is the one between a separator and a filter. A separator uses centrifugal force to fling out droplets that are already liquid, which is why it belongs after the air has been cooled. It cannot touch water that is still in vapor form, so it is not a substitute for an \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/air-dryers\"\u003eair dryer\u003c\/a\u003e. Put the separator first to take the bulk load off everything downstream, then let a dryer handle the remaining vapor and a \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/coalescing-air-filters\"\u003ecoalescing filter\u003c\/a\u003e handle the fine aerosols.\u003c\/p\u003e\n\u003cp\u003eWhen ordering, match the separator to your system flow in CFM and to your line size and connection type, and plan for how the collected liquid leaves. A separator with no working drain simply fills up and passes water through, so pair one with an automatic or timer \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e sized for the job.\u003c\/p\u003e\n\u003cp\u003eIf you are not sure which size fits your compressor and piping, send us your CFM, working pressure and connection size and we will confirm the right separator for the system.\u003c\/p\u003e","products":[{"product_id":"tsunami-float-drain-replacement-single","title":"Tsunami Float Drain Replacement — Single Automatic Float with O-Ring for Compressed Air Water Separators","description":"\u003cp\u003eGenuine Tsunami replacement automatic float drain, sold individually with its O-ring. This is the float-style drain used in Tsunami Compressed Air Solutions water separators and oil-coalescing filters to automatically discharge collected condensate and keep your compressed air system free of moisture. When an existing drain becomes clogged, cracked, or simply wears out from regular service, this OEM float gets your water draining properly again.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Tsunami (Suburban Manufacturing) replacement float drain\u003c\/li\u003e\n\u003cli\u003eSold individually — one float drain with one O-ring\u003c\/li\u003e\n\u003cli\u003eAutomatic float-operated drain: float lifts off its orifice as liquid collects, discharging condensate, then re-seats\u003c\/li\u003e\n\u003cli\u003eFits Tsunami 20, 50, and 120 Series water separators and oil-coalescing filters\u003c\/li\u003e\n\u003cli\u003eFor use on systems rated up to 250 PSI and 122°F\u003c\/li\u003e\n\u003cli\u003eRoutine maintenance: replace the float drain annually for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eReplacement and routine service of Tsunami point-of-use water separators and coalescing filters in spray foam, automotive finishing, manufacturing, food \u0026amp; beverage, woodworking, and general industrial compressed air systems.\u003c\/p\u003e\n\u003cp\u003eKeep your Tsunami water separator draining reliably with this genuine OEM Tsunami automatic float drain, sold individually with O-ring for fast, low-cost service of 20, 50, and 120 Series filters.\u003c\/p\u003e","brand":"Tsunami","offers":[{"title":"Default Title","offer_id":54275176694035,"sku":"21999-0868X1","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/0868.png?v=1781192484"},{"product_id":"tsunami-float-drain-replacement-3-pack","title":"Tsunami Float Drain Replacement 3-Pack — Automatic Floats with O-Rings for Compressed Air Water Separators","description":"\u003cp\u003eGenuine Tsunami replacement automatic float drains, supplied as a convenient 3-pack with O-rings. This is the float-style drain used in Tsunami Compressed Air Solutions water separators and oil-coalescing filters to automatically discharge collected condensate and keep your compressed air system free of moisture. Stocking a 3-pack keeps spares on the shelf so you can service multiple filters or stay ahead of routine annual replacement without reordering each time.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Tsunami (Suburban Manufacturing) replacement float drains\u003c\/li\u003e\n\u003cli\u003ePack of three — three float drains, each with an O-ring\u003c\/li\u003e\n\u003cli\u003eAutomatic float-operated drain: float lifts off its orifice as liquid collects, discharging condensate, then re-seats\u003c\/li\u003e\n\u003cli\u003eFits Tsunami 20, 50, and 120 Series water separators and oil-coalescing filters\u003c\/li\u003e\n\u003cli\u003eFor use on systems rated up to 250 PSI and 122°F\u003c\/li\u003e\n\u003cli\u003eRoutine maintenance: replace the float drain annually for reliable operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eReplacement and routine service of Tsunami point-of-use water separators and coalescing filters in spray foam, automotive finishing, manufacturing, food \u0026amp; beverage, woodworking, and general industrial compressed air systems. The 3-pack is ideal for facilities running several filtration points or maintaining a service-parts inventory.\u003c\/p\u003e\n\u003cp\u003eKeep your Tsunami water separators draining reliably with this genuine OEM Tsunami automatic float drain 3-pack, supplied with O-rings for fast, low-cost service of 20, 50, and 120 Series filters.\u003c\/p\u003e","brand":"Tsunami","offers":[{"title":"Default Title","offer_id":54275239444755,"sku":"21999-0868","price":268.83,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/0868.png?v=1781192484"},{"product_id":"super-dry-mbk-mounting-bracket-kit","title":"Super-Dry MBK Mounting Bracket Kit for FSD Water Separators and SAF Air Filters","description":"\u003cp\u003eThe Super-Dry MBK mounting bracket kits let you gang Super-Dry FSD Series water separators and SAF Series compressed air filters into a single wall-mounted assembly instead of piping each housing separately. One kit connects up to three units, and it can be set up for one or two units by cutting or replacing the supplied threaded rod. Pick MBK-A for the 45 and 85 size housings or MBK-B for the 185 and 375 size housings.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTwo brackets clamp the housing heads and two threaded rods draw the units together into one rigid block.\u003c\/li\u003e\n\u003cli\u003eThe supplied o-rings seal between adjacent housing heads, so the units join directly without extra pipe.\u003c\/li\u003e\n\u003cli\u003eIf you prefer a piped connection, close nipples (not included) can be used in place of the supplied o-rings.\u003c\/li\u003e\n\u003cli\u003eThe 375 size housings have no o-ring groove in the head, so 1-1\/2\" close nipples (not included) are required to connect them.\u003c\/li\u003e\n\u003cli\u003eTrimming or swapping the threaded rod adapts the kit to a one or two unit build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eFits Separators\u003c\/th\u003e\n\u003cth\u003eFits Filters\u003c\/th\u003e\n\u003cth\u003eUnits Connected\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-255\u003c\/td\u003e\n\u003ctd\u003eMBK-A\u003c\/td\u003e\n\u003ctd\u003eFSD-45-W (45 SCFM), FSD-85-W (85 SCFM)\u003c\/td\u003e\n\u003ctd\u003eSAF-45, SAF-85\u003c\/td\u003e\n\u003ctd\u003eUp to 3\u003c\/td\u003e\n\u003ctd\u003e0.5 lb\u003c\/td\u003e\n\u003ctd\u003eConnects on the supplied o-rings, or on close nipples (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-275\u003c\/td\u003e\n\u003ctd\u003eMBK-B\u003c\/td\u003e\n\u003ctd\u003eFSD-185-W (185 SCFM), FSD-375-W (375 SCFM)\u003c\/td\u003e\n\u003ctd\u003eSAF-185, SAF-375\u003c\/td\u003e\n\u003ctd\u003eUp to 3\u003c\/td\u003e\n\u003ctd\u003e0.5 lb\u003c\/td\u003e\n\u003ctd\u003e375 models require 1-1\/2\" close nipples (not included)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding a separator plus filter train on a shop wall in one compact block\u003c\/li\u003e\n\u003cli\u003eAdding a second or third filtration stage to an existing FSD or SAF installation\u003c\/li\u003e\n\u003cli\u003ePaint booth and spray finishing air preparation panels\u003c\/li\u003e\n\u003cli\u003eSandblasting and abrasive blasting supply lines\u003c\/li\u003e\n\u003cli\u003ePoint-of-use air stations feeding tools and pneumatic machinery\u003c\/li\u003e\n\u003cli\u003eCompressor room cleanup where separators and filters were previously hard piped\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2 brackets\u003c\/li\u003e\n\u003cli\u003e2 threaded rods\u003c\/li\u003e\n\u003cli\u003e2 o-rings\u003c\/li\u003e\n\u003cli\u003e4 washers\u003c\/li\u003e\n\u003cli\u003e4 split lock washers\u003c\/li\u003e\n\u003cli\u003e4 end caps\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGanging FSD water separators and SAF filters with an MBK kit cuts out fittings, shortens the run between stages and gives you a serviceable assembly you can unbolt one housing at a time. Between them, MBK-A and MBK-B fit the 45 through 375 sizes of Super-Dry separator and filter housings used in paint, blasting and general plant air systems. There is no MBK kit for the 515 size housings. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"MBK-A","offer_id":54594670690579,"sku":"330-255","price":74.49,"currency_code":"USD","in_stock":true},{"title":"MBK-B","offer_id":54594670723347,"sku":"330-275","price":91.54,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-mbk-a-330-255-01.jpg?v=1787264350"},{"product_id":"super-dry-fsd-fd-automatic-float-drain","title":"Super-Dry FSD-FD Automatic Float Drain for FSD Water Separators and SAF Air Filters","description":"\u003cp\u003eThe FSD-FD is the automatic float drain fitted to Super-Dry FSD Series water separators and SAF Series compressed air filters. Those housings ship with a float drain built in, and this is the replacement when the original sticks open, sticks closed or has been fouled by scale and pipe debris. It is a direct service part, so no change to the bowl or the plumbing is needed.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eLiquid knocked out of the air stream collects in the bottom of the separator or filter bowl. As the level rises, the float rises with it and opens the drain port, condensate is pushed out by line pressure, and the float drops back and closes the port once the bowl is clear. The drain runs on its own with no timer, no power supply and no operator attention, which is why a stuck float usually shows up as either a constant air leak or as water carrying over downstream.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-200\u003c\/td\u003e\n\u003ctd\u003eFSD-FD\u003c\/td\u003e\n\u003ctd\u003eAutomatic float drain\u003c\/td\u003e\n\u003ctd\u003eFSD Series water separators, SAF Series compressed air filters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacing a leaking or stuck float drain on an FSD Series centrifugal water separator\u003c\/li\u003e\n\u003cli\u003eRestoring automatic drainage on a SAF Series filter housing\u003c\/li\u003e\n\u003cli\u003eReturning a separator or filter to float drain service after a timer drain conversion\u003c\/li\u003e\n\u003cli\u003ePaint shop and spray booth air preparation where carryover ruins finish quality\u003c\/li\u003e\n\u003cli\u003eSandblasting and plasma cutting supply lines\u003c\/li\u003e\n\u003cli\u003eMaintenance spares for plants running several FSD or SAF housings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA separator or filter only does its job if the liquid it knocks out actually leaves the bowl, and the FSD-FD float drain is the part that makes that automatic. Fitting the correct Super-Dry service part keeps FSD and SAF housings working as designed in paint, blasting and general compressed air systems. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"Default Title","offer_id":54594671182099,"sku":"330-200","price":120.26,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-fsd-fd-330-200-01.jpg?v=1787264377"},{"product_id":"super-dry-fsd-series-centrifugal-water-separator","title":"Super-Dry FSD Series Centrifugal Water Separator, 45 to 515 SCFM, 1\/2\" to 2\" NPT","description":"\u003cp\u003eThe Super-Dry FSD Series is a centrifugal water separator that pulls bulk liquid water out of a compressed air line before it reaches your dryer, your filters or your tools. Five models cover 45 to 515 SCFM at 100 PSIG with 1\/2\" to 2\" NPT inlet and outlet ports, so you can size the separator to the pipe you already run. It is built for shops that see slugs of condensate coming off an aftercooler or air receiver and want that water out of the system.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eCompressed air enters the housing and passes an internal spinner that forces it into a tight rotating path. The liquid droplets are heavier than the air carrying them, so centrifugal action throws them against the vessel wall, where they run down and collect in the bowl. A built-in float drain discharges that condensate automatically, and a timer drain is offered as an option. Install an FSD separator downstream of an aftercooler or air receiver and upstream of a compressed air dryer.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eAirflow at 100 PSIG\u003c\/th\u003e\n\u003cth\u003eInlet \/ Outlet Ports\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-100\u003c\/td\u003e\n\u003ctd\u003eFSD-45-W\u003c\/td\u003e\n\u003ctd\u003e45 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\/2\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-110\u003c\/td\u003e\n\u003ctd\u003eFSD-85-W\u003c\/td\u003e\n\u003ctd\u003e85 SCFM\u003c\/td\u003e\n\u003ctd\u003e3\/4\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-120\u003c\/td\u003e\n\u003ctd\u003eFSD-185-W\u003c\/td\u003e\n\u003ctd\u003e185 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-130\u003c\/td\u003e\n\u003ctd\u003eFSD-375-W\u003c\/td\u003e\n\u003ctd\u003e375 SCFM\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-140\u003c\/td\u003e\n\u003ctd\u003eFSD-515-W\u003c\/td\u003e\n\u003ctd\u003e515 SCFM\u003c\/td\u003e\n\u003ctd\u003e2\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe published limits shown here apply to the FSD-45-W only: a maximum inlet pressure of 232 PSIG and a maximum inlet temperature of 176°F (80°C). Super-Dry does not publish separate pressure or temperature limits for the four larger separators. Every separator in the series ships with the float drain and the internal spinner in place, and Super-Dry rates the FSD housings for excellent liquid removal efficiencies at all flow conditions.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBulk water knockout ahead of a refrigerated or desiccant air dryer\u003c\/li\u003e\n\u003cli\u003eDownstream of an aftercooler or air receiver where condensate collects\u003c\/li\u003e\n\u003cli\u003ePaint booths and spray finishing lines that cannot tolerate water carryover\u003c\/li\u003e\n\u003cli\u003eSandblasting and abrasive blast cabinets\u003c\/li\u003e\n\u003cli\u003ePlant air headers feeding pneumatic tools and air motors\u003c\/li\u003e\n\u003cli\u003ePoint of use protection for pneumatic controls, valves and cylinders\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eFSD Series separator housing with internal spinner\u003c\/li\u003e\n\u003cli\u003eBuilt-in float drain (timer drain available as an option)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe FSD Series gives compressed air systems a straightforward mechanical first stage of liquid removal, which keeps dryers, filters and downstream air tools working in the condition they were designed for. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc. We can help you match model to pipe size and flow.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"FSD-45-W","offer_id":54594671214867,"sku":"330-100","price":354.49,"currency_code":"USD","in_stock":true},{"title":"FSD-85-W","offer_id":54594671247635,"sku":"330-110","price":444.23,"currency_code":"USD","in_stock":true},{"title":"FSD-185-W","offer_id":54594671280403,"sku":"330-120","price":596.79,"currency_code":"USD","in_stock":true},{"title":"FSD-375-W","offer_id":54594671313171,"sku":"330-130","price":690.13,"currency_code":"USD","in_stock":true},{"title":"FSD-515-W","offer_id":54594671345939,"sku":"330-140","price":1099.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-fsd-45-w-330-100-01.jpg?v=1787264379"},{"product_id":"super-dry-fsd-ad-bowl-adaptor","title":"Super-Dry FSD-AD Bowl Adaptor for FSD Water Separator and SAF Filter Timer Drain Conversion","description":"\u003ch3\u003e\u003cstrong\u003eThe adaptor is G 1\/8 (BSPP) to 1\/2\" NPT\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cp\u003eThe FSD-AD is the bowl adaptor that lets you run an automatic timer drain on a Super-Dry FSD Series water separator or SAF Series compressed air filter. Those housings come with a float drain in the bowl, and the adaptor takes its place so a timer drain can be connected instead. It is the small piece that makes the conversion possible, so plan on ordering it alongside the timer drain itself.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eYou remove the factory float drain from the bottom of the separator or filter bowl and thread the FSD-AD into the same opening. The adaptor gives you a connection point for an automatic timer drain, which then discharges collected condensate on a set schedule rather than reacting to a float. That is the setup shops choose when the bowl fills faster than a float drain keeps up, when a float has repeatedly fouled on scale, or when drainage needs to be predictable and tied to the compressor duty cycle.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003eReplaces\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e170-241\u003c\/td\u003e\n\u003ctd\u003eFSD-AD\u003c\/td\u003e\n\u003ctd\u003eBowl adaptor for automatic timer drain\u003c\/td\u003e\n\u003ctd\u003eFSD Series water separators, SAF Series compressed air filters\u003c\/td\u003e\n\u003ctd\u003eFactory float drain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eConverting an FSD Series water separator from float drain to automatic timer drain\u003c\/li\u003e\n\u003cli\u003eConverting a SAF Series filter housing to timer drain operation\u003c\/li\u003e\n\u003cli\u003eDirty or scaling systems where float drains foul and stick\u003c\/li\u003e\n\u003cli\u003eHigh condensate loads in humid plants and summer duty\u003c\/li\u003e\n\u003cli\u003ePaint booth and spray finishing air preparation that cannot tolerate carryover\u003c\/li\u003e\n\u003cli\u003eSandblasting and general plant air drops on scheduled maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe FSD-AD bowl adaptor is the link between a Super-Dry separator or filter bowl and an automatic timer drain, and it is far cheaper than replumbing the drain leg. Pair it with a Super-Dry timer drain to put condensate removal from FSD and SAF housings on a fixed schedule. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"Default Title","offer_id":54594671608083,"sku":"170-241","price":9.38,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-fsd-ad-170-241-01.jpg?v=1787264405"},{"product_id":"super-dry-fsd-series-water-separator-replacement-element","title":"Super-Dry FSD Series Water Separator Replacement Element, Fits FSD-45-W to FSD-515-W","description":"\u003cp\u003eThis is the replacement internal deflector element for Super-Dry FSD Series centrifugal water separators. Each element is matched to one separator model, from the FSD-45-W up to the FSD-515-W, so the airflow path through the housing stays the way the separator was designed to run. Order it when you are servicing a separator or keeping a spare on the shelf for a line you cannot afford to shut down.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe deflector sets the rotating flow path inside the separator housing, which is what throws bulk liquid out of the air stream.\u003c\/li\u003e\n\u003cli\u003eRated to remove up to 99% of bulk liquids from the compressed air passing through it.\u003c\/li\u003e\n\u003cli\u003eNo moving parts, so it runs maintenance free between service intervals.\u003c\/li\u003e\n\u003cli\u003eBuilt for the operating conditions the FSD housings see in industrial plant air.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eElement\u003c\/th\u003e\n\u003cth\u003eFits Separator\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-105\u003c\/td\u003e\n\u003ctd\u003eE-45-W\u003c\/td\u003e\n\u003ctd\u003eFSD-45-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-115\u003c\/td\u003e\n\u003ctd\u003eE-85-W\u003c\/td\u003e\n\u003ctd\u003eFSD-85-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-125\u003c\/td\u003e\n\u003ctd\u003eE-185-W\u003c\/td\u003e\n\u003ctd\u003eFSD-185-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-135\u003c\/td\u003e\n\u003ctd\u003eE-375-W\u003c\/td\u003e\n\u003ctd\u003eFSD-375-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-145\u003c\/td\u003e\n\u003ctd\u003eE-515-W\u003c\/td\u003e\n\u003ctd\u003eFSD-515-W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSelect the element by the separator model it goes into. Elements are not interchangeable between housing sizes.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eScheduled service of an installed FSD Series water separator\u003c\/li\u003e\n\u003cli\u003eRestoring separation efficiency on a line that has started passing water\u003c\/li\u003e\n\u003cli\u003eSpares stock for facilities holding tight air quality standards\u003c\/li\u003e\n\u003cli\u003ePaint and finishing systems where moisture carryover ruins the work\u003c\/li\u003e\n\u003cli\u003eProtecting dryers, filters and pneumatic tools from water damage\u003c\/li\u003e\n\u003cli\u003eSandblasting and other high demand air uses that run wet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeeping a fresh deflector in an FSD Series separator is the cheapest way to protect the dryers, filters and air tools sitting downstream of it. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc. We can confirm which element matches the separator you have in service.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"E-45-W","offer_id":54594671902995,"sku":"330-105","price":141.79,"currency_code":"USD","in_stock":true},{"title":"E-85-W","offer_id":54594671935763,"sku":"330-115","price":183.08,"currency_code":"USD","in_stock":true},{"title":"E-185-W","offer_id":54594671968531,"sku":"330-125","price":268.33,"currency_code":"USD","in_stock":true},{"title":"E-375-W","offer_id":54594672001299,"sku":"330-135","price":361.67,"currency_code":"USD","in_stock":true},{"title":"E-515-W","offer_id":54594672034067,"sku":"330-145","price":423.59,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-e-45-w-330-105-01.jpg?v=1787264421"},{"product_id":"super-dry-fsd-bvs-ball-valve-strainer-kit","title":"Super-Dry FSD-BVS Ball Valve Strainer Kit with Bowl Adaptor for FSD and SAF Housings","description":"\u003cp\u003eThe FSD-BVS is a ball valve strainer kit that connects to the bowl of a Super-Dry FSD Series water separator or SAF Series compressed air filter and lets you run an automatic timer drain from it. The kit bundles the bowl adaptor with the ball valve and strainer, so it is the complete package for the conversion rather than the adaptor on its own. Buy it when you are moving a separator or filter from float drain operation to a scheduled timer drain.\u003c\/p\u003e\n\u003ch3\u003eHow it works\u003c\/h3\u003e\n\u003cp\u003eThe bowl adaptor threads into the separator or filter bowl in place of the factory float drain and provides the connection for an automatic timer drain. The ball valve gives you a manual shutoff, so the timer drain can be isolated and serviced without taking the housing out of the air system, and the strainer screens rust, scale and pipe debris out of the condensate before it reaches the drain valve. Keeping that debris out is what stops a timer drain from being held open by trash on the seat.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eType\u003c\/th\u003e\n\u003cth\u003eFits\u003c\/th\u003e\n\u003cth\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e330-240\u003c\/td\u003e\n\u003ctd\u003eFSD-BVS\u003c\/td\u003e\n\u003ctd\u003eBall valve strainer kit with bowl adaptor\u003c\/td\u003e\n\u003ctd\u003eFSD Series water separator and SAF Series filter bowls\u003c\/td\u003e\n\u003ctd\u003eConnection of an automatic timer drain\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eAdding an automatic timer drain to an FSD Series centrifugal water separator\u003c\/li\u003e\n\u003cli\u003eAdding an automatic timer drain to a SAF Series compressed air filter housing\u003c\/li\u003e\n\u003cli\u003eSystems with rust and scale where a drain valve needs upstream screening\u003c\/li\u003e\n\u003cli\u003eInstallations where the drain must be isolated for service without shutting the line down\u003c\/li\u003e\n\u003cli\u003ePaint booth and spray finishing air preparation\u003c\/li\u003e\n\u003cli\u003eSandblasting and general plant air drops on high condensate duty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eBowl adaptor\u003c\/li\u003e\n\u003cli\u003eBall valve\u003c\/li\u003e\n\u003cli\u003eStrainer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe FSD-BVS kit turns an FSD separator or SAF filter bowl into a proper timer drain connection, with isolation and debris screening built into the same assembly. It is the straightforward way to put condensate removal on a schedule in paint, blasting and general compressed air systems. Warthog Air Compressor Store is an authorized US source for Super-Dry Systems Inc.\u003c\/p\u003e","brand":"Super-Dry","offers":[{"title":"Default Title","offer_id":54594672394515,"sku":"330-240","price":46.67,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/super-dry-fsd-bvs-330-240-01.jpg?v=1787264432"},{"product_id":"champion-cfl-series-grade-a-mechanical-water-separator","title":"Champion CFL Series Inline Moisture Separator – Grade A Mechanical Water Separator (20–780 SCFM)","description":"\u003cp\u003eThe \u003cstrong\u003eChampion CFL Series Grade A\u003c\/strong\u003e is a \u003cstrong\u003emechanical (centrifugal) moisture separator\u003c\/strong\u003e available in ten flow rates from \u003cstrong\u003e20 to 780 SCFM\u003c\/strong\u003e. It uses a high-velocity swirl chamber rather than a filter media to fling bulk liquid water, condensate slugs, and coarse pipe scale out of the air stream, then drains them away automatically. Rated to \u003cstrong\u003e300 PSIG\u003c\/strong\u003e, the Grade A is the very first stage of a properly designed compressed-air treatment train and the cheapest insurance you can buy for the dryer and filters behind it.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSelect your flow rate and connection size from the dropdown above.\u003c\/strong\u003e\u003c\/p\u003e\u003ch2\u003eWhy a Mechanical Separator Comes First\u003c\/h2\u003e\u003cp\u003eA compressor aftercooler knocks the air temperature down fast, and most of the water vapor the compressor swallowed condenses right there into liquid. That liquid arrives downstream as slugs and mist. Sending it straight into a coalescing filter floods the element, collapses filter life to a matter of weeks, and drives pressure drop through the roof. A \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/air-filters\"\u003emechanical separator\u003c\/a\u003e strips that bulk liquid out with almost no pressure loss and no consumable media, so the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/coalescing-air-filters\"\u003ecoalescing filters\u003c\/a\u003e behind it only have to deal with aerosols and the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/refrigerated-air-dryers\"\u003erefrigerated dryer\u003c\/a\u003e only has to deal with vapor.\u003c\/p\u003e\u003ch2\u003eSeparation Performance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBulk Liquid Removal\u003c\/strong\u003e — Up to 99% of free liquid water and oil carried in the air stream.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMechanism\u003c\/strong\u003e — Centrifugal swirl separation, no filter media to load up or replace on a schedule.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Drop\u003c\/strong\u003e — Very low and, unlike a media filter, essentially constant over the life of the unit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eModel Selection Chart\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel (CCN)\u003c\/th\u003e\n\u003cth\u003eRated Flow\u003c\/th\u003e\n\u003cth\u003eConnection\u003c\/th\u003e\n\u003cth\u003eDimensions (H x W)\u003c\/th\u003e\n\u003cth\u003eShip Weight\u003c\/th\u003e\n\u003cth\u003eElement\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL20A11AYTW\u003c\/td\u003e\n\u003ctd\u003e20 SCFM\u003c\/td\u003e\n\u003ctd\u003e3\/8\" NPTF\u003c\/td\u003e\n\u003ctd\u003e8 x 4 in\u003c\/td\u003e\n\u003ctd\u003e4.2 lb\u003c\/td\u003e\n\u003ctd\u003eCF20AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL35A13AYTW\u003c\/td\u003e\n\u003ctd\u003e35 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e11 x 4 in\u003c\/td\u003e\n\u003ctd\u003e8.1 lb\u003c\/td\u003e\n\u003ctd\u003eCF35AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL60A13AYTW\u003c\/td\u003e\n\u003ctd\u003e60 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e13 x 4 in\u003c\/td\u003e\n\u003ctd\u003e8.5 lb\u003c\/td\u003e\n\u003ctd\u003eCF60AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL100A17AYTW\u003c\/td\u003e\n\u003ctd\u003e100 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\" NPTF\u003c\/td\u003e\n\u003ctd\u003e15 x 5 in\u003c\/td\u003e\n\u003ctd\u003e6.3 lb\u003c\/td\u003e\n\u003ctd\u003eCF100AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL170A17AYTW\u003c\/td\u003e\n\u003ctd\u003e170 SCFM\u003c\/td\u003e\n\u003ctd\u003e1\" NPTF\u003c\/td\u003e\n\u003ctd\u003e20 x 5 in\u003c\/td\u003e\n\u003ctd\u003e6.9 lb\u003c\/td\u003e\n\u003ctd\u003eCF170AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL250A21YTW\u003c\/td\u003e\n\u003ctd\u003e250 SCFM\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e23 x 6 in\u003c\/td\u003e\n\u003ctd\u003e10.2 lb\u003c\/td\u003e\n\u003ctd\u003eCF250AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL375A21YTW\u003c\/td\u003e\n\u003ctd\u003e375 SCFM\u003c\/td\u003e\n\u003ctd\u003e1-1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e27 x 6 in\u003c\/td\u003e\n\u003ctd\u003e11.3 lb\u003c\/td\u003e\n\u003ctd\u003eCF375AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL485A23YTW\u003c\/td\u003e\n\u003ctd\u003e485 SCFM\u003c\/td\u003e\n\u003ctd\u003e2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e31 x 8 in\u003c\/td\u003e\n\u003ctd\u003e28 lb\u003c\/td\u003e\n\u003ctd\u003eCF485AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL625A25YTW\u003c\/td\u003e\n\u003ctd\u003e625 SCFM\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e37 x 8 in\u003c\/td\u003e\n\u003ctd\u003e33 lb\u003c\/td\u003e\n\u003ctd\u003eCF625AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCFL780A25YTW\u003c\/td\u003e\n\u003ctd\u003e780 SCFM\u003c\/td\u003e\n\u003ctd\u003e2-1\/2\" NPTF\u003c\/td\u003e\n\u003ctd\u003e43 x 8 in\u003c\/td\u003e\n\u003ctd\u003e38 lb\u003c\/td\u003e\n\u003ctd\u003eCF780AE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003cp\u003eModels 20 through 170 ship with an internal automatic float drain. Models 250 through 780 ship with a manual drain as standard; an internal automatic drain or an electronic demand drain can be substituted at order entry. Connection sizes other than those listed, including BSP threads, are available on the same housings. Call us and we will configure the part number for you.\u003c\/p\u003e\u003ch2\u003eKey Features at a Glance\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCentrifugal Separation\u003c\/strong\u003e — Removes up to 99% of bulk liquid with no media to blind off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e20 to 780 SCFM Rated Flow\u003c\/strong\u003e — Ten sizes covering a 5 HP shop compressor through large plant air headers.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e300 PSIG Maximum Working Pressure\u003c\/strong\u003e — 250 PSIG when supplied with the internal automatic drain or liquid level indicator.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e150°F Maximum Inlet Temperature\u003c\/strong\u003e — Handles hot discharge air directly off the aftercooler.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeavy-Duty Cast Aluminum Housing\u003c\/strong\u003e — Corrosion resistant, factory pressure tested.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAutomatic Float Drain\u003c\/strong\u003e — Standard on models 20 through 170, optional on the larger sizes.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModular Body\u003c\/strong\u003e — Bolts directly to other CFL housings with a connector kit, so a separator plus filter stack takes almost no extra pipe length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChampion Pneumatic Quality\u003c\/strong\u003e — Backed by over a century of compressed-air engineering.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShared Technical Specifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFilter Grade\u003c\/td\u003e\n\u003ctd\u003eA — Mechanical (Centrifugal) Separator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRated Flow Range\u003c\/td\u003e\n\u003ctd\u003e20 – 780 SCFM @ 100 PSIG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Working Pressure\u003c\/td\u003e\n\u003ctd\u003e300 PSIG with manual drain, 250 PSIG with automatic drain or liquid level indicator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Inlet Temperature\u003c\/td\u003e\n\u003ctd\u003e150°F (66°C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBulk Liquid Removal\u003c\/td\u003e\n\u003ctd\u003eUp to 99%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDrain\u003c\/td\u003e\n\u003ctd\u003eAutomatic float drain (models 20-170), manual drain (models 250-780)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eElement\u003c\/td\u003e\n\u003ctd\u003eStainless steel separator element, field replaceable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHousing\u003c\/td\u003e\n\u003ctd\u003eCast aluminum, epoxy painted\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Point\u003c\/td\u003e\n\u003ctd\u003eF.O.B. Ocala, FL 34474\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch2\u003eIdeal Applications\u003c\/h2\u003e\u003cp\u003eInstall a Grade A immediately downstream of the aftercooler or wet receiver on any system that makes visible water: reciprocating compressors in humid climates, rotary screw packages without an integral separator, outdoor or unheated compressor rooms, plants with long uninsulated header runs, and any system where the coalescing filters are loading up far faster than they should. It is also the standard pre-treatment ahead of a \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/desiccant-air-dryers\"\u003edesiccant dryer\u003c\/a\u003e, where liquid water carryover will destroy a desiccant bed outright.\u003c\/p\u003e\u003ch2\u003eBuild Your Filtration Train\u003c\/h2\u003e\u003cp\u003eFor a complete compressed-air treatment system, install in this order: (1) \u003cstrong\u003eCFL Grade A mechanical separator\u003c\/strong\u003e to knock out bulk liquid; (2) \u003ca href=\"https:\/\/aircompressorstore.com\/products\/champion-cfl-series-grade-c-particulate-inline-filter\"\u003eCFL Grade C particulate filter\u003c\/a\u003e to remove solids; (3) refrigerated or desiccant \u003cstrong\u003edryer\u003c\/strong\u003e to remove water vapor; (4) \u003ca href=\"https:\/\/aircompressorstore.com\/products\/champion-cfl-series-grade-e-coalescing-inline-filter\"\u003eCFL Grade E coalescing filter\u003c\/a\u003e for instrument-quality air.\u003c\/p\u003e\u003ch2\u003eElement Replacement and Service\u003c\/h2\u003e\u003cp\u003eThe Grade A separator element is a stainless steel swirl element rather than a consumable media cartridge, so it does not need an annual change the way a coalescing element does. Inspect it at each scheduled shutdown, clean it if it has collected scale, and replace it if it is damaged or corroded. The part you need is the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/air-filter-elements\"\u003eCF-series element\u003c\/a\u003e matching your housing size, listed in the chart above. What does need attention is the drain: verify it is discharging and not stuck open, because a stuck drain either floods the housing or bleeds compressed air continuously.\u003c\/p\u003e\u003ch2\u003eWhy Buy from Air Compressor Store\u003c\/h2\u003e\u003cp\u003eAir Compressor Store is an authorized Champion Pneumatic distributor. Every CFL Series separator ships with the full factory warranty, lifetime application support, and access to our compressed-air engineers for sizing and system design. Need a configuration that is not in the dropdown, such as BSP threads, an electronic demand drain, or a liquid level indicator? Call us and we will build the part number.\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat is the difference between a Grade A separator and a Grade C filter?\u003c\/h3\u003e\u003cp\u003eA Grade A uses centrifugal force to throw bulk liquid out of the air stream. A Grade C uses a media element to trap solid particles down to 1 micron. They do different jobs and in a well-designed system you use both, with the separator first.\u003c\/p\u003e\u003ch3\u003eDo I still need a dryer if I install a separator?\u003c\/h3\u003e\u003cp\u003eYes. A separator removes liquid water that has already condensed. It cannot remove water vapor, which will condense later as the air cools in the piping. A separator protects the dryer; it does not replace it.\u003c\/p\u003e\u003ch3\u003eHow do I size one?\u003c\/h3\u003e\u003cp\u003eSize to the actual SCFM flowing through that point in the system, not to compressor horsepower. Undersizing a separator hurts twice, because separation efficiency falls off at high velocity and pressure drop climbs. When in doubt, size up.\u003c\/p\u003e\u003ch3\u003eCan I mount this to other CFL filters?\u003c\/h3\u003e\u003cp\u003eYes. Housings 20 through 170 join with modular connector kit C23428001 or C23428002, and housings 250 through 780 join with manifold kit C23436001 or C23436002, so a separator and filter share one compact assembly.\u003c\/p\u003e","brand":"Champion","offers":[{"title":"20 SCFM — 3\/8\" NPTF","offer_id":54781541122323,"sku":"CFL20A11AYTW","price":307.8,"currency_code":"USD","in_stock":true},{"title":"35 SCFM — 1\/2\" NPTF","offer_id":54781541155091,"sku":"CFL35A13AYTW","price":332.1,"currency_code":"USD","in_stock":true},{"title":"60 SCFM — 1\/2\" NPTF","offer_id":54781541187859,"sku":"CFL60A13AYTW","price":429.3,"currency_code":"USD","in_stock":true},{"title":"100 SCFM — 1\" NPTF","offer_id":54781541220627,"sku":"CFL100A17AYTW","price":461.7,"currency_code":"USD","in_stock":true},{"title":"170 SCFM — 1\" NPTF","offer_id":54781541253395,"sku":"CFL170A17AYTW","price":696.6,"currency_code":"USD","in_stock":true},{"title":"250 SCFM — 1-1\/2\" NPTF","offer_id":54781541286163,"sku":"CFL250A21YTW","price":874.8,"currency_code":"USD","in_stock":true},{"title":"375 SCFM — 1-1\/2\" NPTF","offer_id":54781541318931,"sku":"CFL375A21YTW","price":1182.6,"currency_code":"USD","in_stock":true},{"title":"485 SCFM — 2\" NPTF","offer_id":54781541351699,"sku":"CFL485A23YTW","price":1498.5,"currency_code":"USD","in_stock":true},{"title":"625 SCFM — 2-1\/2\" NPTF","offer_id":54781541384467,"sku":"CFL625A25YTW","price":1757.7,"currency_code":"USD","in_stock":true},{"title":"780 SCFM — 2-1\/2\" NPTF","offer_id":54781541417235,"sku":"CFL780A25YTW","price":2049.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/CFL1.png?v=1780354005"}],"url":"https:\/\/aircompressorstore.com\/collections\/moisture-separators.oembed","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}