{"title":"ABAC AS Rotary Screw Air Compressors","description":"\u003ch2\u003eABAC AS Rotary Screw Air Compressors\u003c\/h2\u003e\n\u003cp\u003eThe AS range is ABAC's answer to a shop that runs air all day. A rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of cycling, overheating and waiting to cool like a piston machine. This page covers the whole AS line from 3 to 30 HP, at 125, 150 or 175 PSI, from 11.3 CFM up to 114.1 CFM, with sound levels between 59 and 71 dBA.\u003c\/p\u003e\n\u003cp\u003eEvery size comes in more than one configuration. Base mount units have no receiver and are meant to be piped into a shop that already has a tank. Tank mount units arrive on a 71, 131 or 132 gallon ASME receiver, wired and ready to pipe. Any of those can be ordered with an integrated refrigerated dryer, which is the simplest way to keep water out of tools, lines and finishes without finding floor space for a separate cabinet. The S variants, such as the AS-10S and AS-20S, trade a little pressure for noticeably more airflow and a quieter cabinet at 65 to 67 dBA.\u003c\/p\u003e\n\u003cp\u003eSizing it: work out the CFM your tools actually draw at the pressure you run, then add headroom rather than buying to the number on the box. If the shop uses air in short bursts instead of continuously, a two-stage \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-ironman-air-compressors\"\u003eABAC Ironman cast iron piston compressor\u003c\/a\u003e may be the cheaper machine. See the whole brand in \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-air-compressors\"\u003eABAC air compressors\u003c\/a\u003e, or pair a base mount unit with an \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-cool-refrigerated-air-dryers\"\u003eABAC COOL refrigerated dryer\u003c\/a\u003e and a receiver from our \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/air-compressor-tanks\"\u003eair compressor tanks\u003c\/a\u003e range.\u003c\/p\u003e","products":[{"product_id":"3hp-130psi-24gal-rotary-screw-portable-air-compressor-by-abac","title":"ABAC 3 HP 130 PSI Rotary Screw Portable Air Compressor, 24 or 52 Gallon","description":"\u003ch2\u003eWho buys a 3 HP rotary screw\u003c\/h2\u003e\n\u003cp\u003eThis ABAC AS-3D is for a small shop that runs air most of the day and is tired of a piston compressor cycling, overheating and filling the room with noise. A rotary screw is rated for 100 percent duty, so a tire shop, a detail bay, a small fabrication shop with a plasma cutter, a dental or lab setup, or a sign shop can leave it running without a cool down period. ABAC rates every AS-3D at 11.3 CFM measured to ISO 1217 Annex C at 123 PSI, with a 130 PSI maximum, and the whole machine runs at 59 dBA, quiet enough to hold a conversation beside it. That covers a sander, a couple of air ratchets, a framing nailer or a small spray gun. It is not the machine for a sandblaster or for several impact wrenches at once; that needs a 5 HP or larger screw from the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eWhat is inside\u003c\/h3\u003e\n\u003cp\u003eThe AS-3D uses a fully integrated aluminum block air end driven by a direct drive transmission, so there are no belts to tension or replace and no drive losses between motor and air end. An optimized cooling system keeps discharge temperatures down for continuous running, and the plug-and-play layout means the unit arrives wired to its receiver and ready to pipe. ABAC assembles these for professional work: wood and metalworking, auto body repair, hammering, grinding, orbital sanding, fastening, precision assembly and air or water spraying.\u003c\/p\u003e\n\u003ch3\u003eChoosing tank, phase and wheels\u003c\/h3\u003e\n\u003cp\u003ePick the 52 gallon tank unless floor space forces the 24. A screw dislikes short cycling, and the larger receiver lets it run longer and rest longer when demand is intermittent. The 24 gallon unit is 44 x 19 x 43 inches and 260 lbs; the 52 gallon wheeled unit is 56 x 24 x 50 inches and 363 lbs. Choose 230 V single phase if that is what the panel offers; the three phase 230 V version is the better long term choice where three phase exists. The wheeled version moves around a shop; the unit without wheels is a narrower 56 x 18 x 46 inches and is meant to be set in place and piped.\u003c\/p\u003e\n\u003ch3\u003eInstallation and what to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive it about 3 feet of clearance on the cooling air side, keep the room between 40 and 104 F, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items; keep a spare set on the shelf. Add a \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e and a filter regulator if the air goes to paint, tires or anything that hates water. See all \u003ca href=\"\/collections\/3-hp-air-compressors\"\u003e3 HP air compressors\u003c\/a\u003e and our full range of \u003ca href=\"\/collections\/portable-air-compressors\"\u003eportable air compressors\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eModels, part numbers and configurations\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eConfiguration\u003c\/th\u003e\n\u003cth\u003eCFM\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D124W\u003c\/td\u003e\n\u003ctd\u003e4152044109\u003c\/td\u003e\n\u003ctd\u003e24 gal \/ 230V \/ 1 phase \/ with wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e260 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D152W\u003c\/td\u003e\n\u003ctd\u003e4152044110\u003c\/td\u003e\n\u003ctd\u003e52 gal \/ 230V \/ 1 phase \/ with wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e363 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D324W\u003c\/td\u003e\n\u003ctd\u003e4152044112\u003c\/td\u003e\n\u003ctd\u003e24 gal \/ 230V \/ 3 phase \/ with wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e260 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D352W\u003c\/td\u003e\n\u003ctd\u003e4152044113\u003c\/td\u003e\n\u003ctd\u003e52 gal \/ 230V \/ 3 phase \/ with wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e363 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D152\u003c\/td\u003e\n\u003ctd\u003e4152044111\u003c\/td\u003e\n\u003ctd\u003e52 gal \/ 230V \/ 1 phase \/ no wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e363 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAS-3D352\u003c\/td\u003e\n\u003ctd\u003e4152044114\u003c\/td\u003e\n\u003ctd\u003e52 gal \/ 230V \/ 3 phase \/ no wheels\u003c\/td\u003e\n\u003ctd\u003e11.3\u003c\/td\u003e\n\u003ctd\u003e363 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at 123 PSI. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"24 \/ 230 volt \/ 1 Phase \/ With Wheels","offer_id":51811970318611,"sku":"4152044109","price":5227.0,"currency_code":"USD","in_stock":true},{"title":"52 \/ 230 volt \/ 1 Phase \/ With Wheels","offer_id":51811970351379,"sku":"4152044110","price":5896.0,"currency_code":"USD","in_stock":true},{"title":"24 \/ 230\/3\/60 \/ With Wheels","offer_id":51811970384147,"sku":"4152044112","price":5227.0,"currency_code":"USD","in_stock":true},{"title":"52 \/ 230\/3\/60 \/ With Wheels","offer_id":51811970416915,"sku":"4152044113","price":5896.0,"currency_code":"USD","in_stock":true},{"title":"52 \/ 230 volt \/ 1 Phase \/ Without Wheels","offer_id":51811970449683,"sku":"4152044111","price":5896.0,"currency_code":"USD","in_stock":true},{"title":"52 \/ 230\/3\/60 \/ Without Wheels","offer_id":51811970482451,"sku":"4152044114","price":5896.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/AS-3D-portable-screw-air-compressor.jpg?v=1772136222"},{"product_id":"abac-as-5-5-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-5251BM 5 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 20.3 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5251BM is a 5 HP base mount rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 20.3 CFM at a 125 PSI maximum and runs at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 335 lbs in a 32 x 24 x 40 in cabinet it takes about as much floor as a two drawer file cabinet. Choose 230V single-phase (AS-5251BM) or 208-230-460V three-phase (AS-5253BM).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5251BM (part number 4152044115) and AS-5253BM (part number 4152043883)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 20.3 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 335 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds a steady line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, and ABAC pairs it with an energy efficient motor and a digital controller that handles programmed maintenance, so the service schedule is on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 5 to 20 HP range the pressure, the airflow and the mounting all move independently. The \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501BM\u003c\/a\u003e is the same machine set for 150 PSI, which trades airflow for pressure at 17.4 CFM in the identical 335 lb cabinet. The \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251BM\u003c\/a\u003e steps up to 7.5 HP and 30.5 CFM at the same 125 PSI on the same 32 x 24 x 40 in footprint, at 360 lbs and 67 dBA. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-5251TM\u003c\/a\u003e puts the same air end on a 71 gallon tank at 485 lbs, and the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-5251TMD\u003c\/a\u003e adds an integrated dryer at 571 lbs. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer in the same package.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. At 20.3 CFM it will keep a pair of air ratchets, a sander or a small spray setup fed all day. At 63 dBA it is quiet enough to leave on the shop floor near the point of use, which saves the piping run a separate compressor room would cost.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 20.3 CFM the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25 refrigerated air dryer\u003c\/a\u003e is the matching size, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54708335247635,"sku":"4152044115","price":5852.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54708335280403,"sku":"4152043883","price":5852.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as5-base-mount-rotary-screw-air-compressor.png?v=1789405866"},{"product_id":"abac-as-5-5-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-5501BM 5 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 17.4 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5501BM is a 5 HP base mount rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 17.4 CFM at a 150 PSI maximum and runs at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting suits tools, test benches and equipment that need more than a standard 125 PSI line. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 335 lbs in a 32 x 24 x 40 in cabinet it takes about as much floor as a two drawer file cabinet. Choose 230V single-phase (AS-5501BM) or 208-230-460V three-phase (AS-5503BM).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5501BM (part number 4152044116) and AS-5503BM (part number 4152043884)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 17.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 335 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 138 PSI for 150 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds a steady line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, and ABAC pairs it with an energy efficient motor and a digital controller that handles programmed maintenance, so the service schedule sits on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 5 to 20 HP range the pressure, the airflow and the mounting all move independently. The \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-5251BM\u003c\/a\u003e is the same machine set for 125 PSI, which trades pressure for airflow at 20.3 CFM in the identical 335 lb cabinet. The \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM\u003c\/a\u003e steps up to 7.5 HP and 27.1 CFM at the same 150 PSI on the same 32 x 24 x 40 in footprint, at 360 lbs and 67 dBA. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TM\u003c\/a\u003e puts the same air end on a 71 gallon tank at 485 lbs, and the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TMD\u003c\/a\u003e adds an integrated dryer at 571 lbs. Pick on pressure first, then on CFM, then on whether you want the tank and the dryer in the same package.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. The 150 PSI setting is the one to choose when a tool, a clamp circuit or a test rig is specified above 125 PSI, or when a long pipe run eats pressure before the air reaches the point of use. At 63 dBA it is quiet enough to leave on the shop floor near that point of use, which saves the piping a separate compressor room would cost.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 17.4 CFM the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25 refrigerated air dryer\u003c\/a\u003e is the matching size, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54708616266003,"sku":"4152044116","price":5852.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54708617576723,"sku":"4152043884","price":5852.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as5-base-mount-150-psi-rotary-screw-air-compressor.png?v=1789409216"},{"product_id":"abac-as-5-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-5251TM 5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 125 PSI, 20.3 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5251TM is a 5 HP rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 20.3 CFM at 125 PSI and runs at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. The compressor arrives already mounted on a 71 gallon air receiver, so it lands as one 56 x 23 x 55 in package with no separate tank to source or plumb. Choose 230V single-phase (AS-5251TM) or 208-230-460V three-phase (AS-5253TM).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5251TM (230V single-phase) \/ AS-5253TM (208-230-460V three-phase)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 20.3 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 485 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 56 x 23 x 55 in\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe same 5 HP air end is sold three ways. The \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-5251BM base mount\u003c\/a\u003e is the compressor on its own, 335 lbs on a 32 x 24 x 40 in footprint, for a shop that already has a receiver. This tank mount build adds the 71 gallon receiver and comes in at 485 lbs. The \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-5251TMD\u003c\/a\u003e adds a refrigerated dryer on the same 56 x 23 x 55 in frame at 571 lbs. If your tools need line pressure above 125 PSI, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TM 150 PSI build\u003c\/a\u003e trades airflow for pressure at 17.4 CFM. If you need more air, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e7.5 HP AS-7.5251TM7\u003c\/a\u003e delivers 30.5 CFM on the same 71 gallon platform.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. A rotary screw is built for continuous running, so it holds a steady line pressure through a full shift instead of recovering between jobs. At 20.3 CFM the AS-5251TM suits a bay running impact tools, an orbital sander or a small plasma cutter, with headroom for intermittent work at a second station.\u003c\/p\u003e\u003ch3\u003eInstallation and air treatment\u003c\/h3\u003e\u003cp\u003eA screw compressor delivers warm, wet air, so plan the downstream side with it. Leave clearance on the cooling air side, run the unit on its own circuit sized to the motor nameplate, and add a \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eCOOL 25 refrigerated air dryer\u003c\/a\u003e and a filter regulator if the air goes to paint, tires or anything that hates water. The AS-5251TMD above is the same machine with that dryer already integrated. Oil, oil filter and separator element are the service items, so keep a spare set on the shelf.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e range, all \u003ca href=\"\/collections\/5-hp-air-compressors\"\u003e5 HP air compressors\u003c\/a\u003e, or our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54708869824787,"sku":"4152044119","price":6184.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54708869857555,"sku":"4152043889","price":6184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor.png?v=1790946107"},{"product_id":"abac-as-5-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-5501TM 5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 150 PSI, 17.4 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5501TM is a 5 HP rotary screw air compressor built for shops that run air continuously rather than in bursts. This 150 PSI build delivers 17.4 CFM and runs at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting suits tools and equipment that need more than a standard 125 PSI line. The compressor arrives already mounted on a 71 gallon air receiver, so it lands as a single 485 lb package with no separate tank to source or plumb. Choose 230V single-phase (AS-5501TM) or 208-230-460V three-phase (AS-5503TM).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5501TM (230\/1\/60, part number 4152044120) \/ AS-5503TM (208-230-460\/3\/60, part number 4152043890)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 17.4 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003eWeight: 485 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 56 x 23 x 55 in\u003c\/li\u003e\n\u003cli\u003eIntegrated aluminum compressor block\u003c\/li\u003e\n\u003cli\u003eThree-stage vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. A rotary screw is built for continuous running, so it holds a steady line pressure through a full shift instead of recovering between jobs. The 150 PSI rating gives headroom for impact tools, presses and equipment that fall off at a standard 125 PSI supply. At 17.4 CFM the AS-5501TM suits a single busy bay, or a second station running intermittently alongside it.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe same 5 HP air end is sold four ways, and the choice comes down to pressure, receiver and air treatment. The \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI version of this machine\u003c\/a\u003e trades pressure for air delivery at 20.3 CFM on the identical 485 lb package, so choose on whether your tools are short of pressure or short of volume. Shops that already own a receiver can take the \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501BM base mount\u003c\/a\u003e, which is the compressor on its own at 335 lbs on a 32 x 24 x 40 in footprint. If finishing work or pneumatic controls mean moisture has to come out of the line, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TMD\u003c\/a\u003e adds a refrigerated dryer on the same 56 x 23 x 55 in frame at 571 lbs. If 17.4 CFM is going to be tight, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e7.5 HP AS-7.5501TM7\u003c\/a\u003e delivers 27.1 CFM at the same 150 PSI on the same 71 gallon platform.\u003c\/p\u003e\u003ch3\u003eInstallation and air treatment\u003c\/h3\u003e\u003cp\u003eA screw compressor delivers warm, wet air, so plan the downstream side with it. Leave clearance on the cooling air side, run the unit on its own circuit sized to the motor nameplate, and add a \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eCOOL 25 refrigerated air dryer\u003c\/a\u003e and a filter regulator if the air goes to paint, tires or anything that hates water. The COOL 25 treats 25 CFM and is rated to 232 PSI, so it covers this machine with margin on both counts. The AS-5501TMD above is the same compressor with that dryer already integrated, which saves the floor space and the interconnecting pipe. Oil, oil filter and separator element are the service items, so keep a spare set on the shelf and let the digital controller track the hours.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. The tank mount build is the simplest way into screw air: receiver and compressor ship as one unit on a single footprint, and a dryer can be added downstream at any time. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e range, all \u003ca href=\"\/collections\/5-hp-air-compressors\"\u003e5 HP air compressors\u003c\/a\u003e, or our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 138 PSI for 150 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54709062762771,"sku":"4152044120","price":6184.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54709062795539,"sku":"4152043890","price":6184.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_ba383961-367a-414c-bec5-5efb6a7491f1.png?v=1790946147"},{"product_id":"abac-as-5-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-5251TMD 5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 125 PSI, 20.3 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5251TMD is a complete compressed air station on one skid: a 5 HP rotary screw air end, a 71 gallon air receiver and a refrigerated dryer, arriving mounted and plumbed as a single unit. This is the 125 PSI build, delivering 20.3 CFM and running at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. There is no separate tank or dryer to source, site and pipe, and nothing to size against each other after the fact. Choose 230V single-phase (AS-5251TMD) or 208-230-460V three-phase (AS-5253TMD); both are the same machine.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5251TMD (230V single-phase) and AS-5253TMD (208-230-460V three-phase)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 20.3 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 571 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 56 x 23 x 55 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of a piston\u003c\/h3\u003e\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw runs, which is why shops that use air most of the day move to one. There is no duty cycle to watch, line pressure stays flat through a shift instead of sagging and recovering, and at 63 dBA this is the quietest machine in the AS-B range. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded rather than starting and stopping all day. The 71 gallon tank on this build is matched to the air end for exactly that reason.\u003c\/p\u003e\u003ch3\u003eWhat the integrated dryer changes\u003c\/h3\u003e\u003cp\u003eEvery compressor makes water. Air leaves the air end hot and saturated, and as it cools in the receiver and the shop piping that moisture drops out as liquid, carrying into tools, regulators, pneumatic controls and anything being sprayed. The refrigerated dryer on this unit chills the air and condenses that water out before it reaches the distribution piping, so what leaves the skid is dry enough for paint work, tire service and air actuated equipment. On a bare compressor you would buy a dryer separately, find floor space beside it and pipe the two together; here it is already done and already matched to the output.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 5 HP AS-B builds the choice is pressure, tank and dryer. At 125 PSI this package puts out 20.3 CFM, the most flow of any 5 HP build in the range. If your tools or equipment need line pressure above the usual shop setting, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e150 PSI version of this same package\u003c\/a\u003e trades flow for pressure, 17.4 CFM instead of 20.3. If you already have dry air or do not need it, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003esame tank mount without the dryer\u003c\/a\u003e is the shorter machine at 485 lbs and the lower price. If you already own a receiver and want to keep it, the \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI base mount\u003c\/a\u003e is the same air end at 335 lbs with nothing under it. Stepping up, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e7.5 HP tank mount with dryer\u003c\/a\u003e puts 30.5 CFM on the same 71 gallon tank at 67 dBA, which is the move when two people are on air at once.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, automotive service and tire bays, cabinet and woodworking shops, small production and fabrication floors, packaging and pneumatic control systems, and any operation where water in the air line is causing rejects, fisheyes or tool wear. The 125 PSI rating covers the great majority of shop air tools, which are rated at or below that pressure, and the 63 dBA sound level means the machine can live in the shop rather than in a closet.\u003c\/p\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. The dryer draws power alongside the compressor, so plan the circuit for the package rather than for the motor alone. Allow for the 56 x 23 x 55 in footprint plus service clearance, and remember that at 571 lbs this arrives on a pallet and wants a forklift or a pallet jack at delivery. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals for you. Add a filter regulator at each drop if the air feeds spray equipment. Call us with your own flow and duty cycle and we will check this machine against the demand before you pipe it in.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e lineup, the \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed screw compressors\u003c\/a\u003e, and our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54709246460179,"sku":"4152044125","price":8607.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54709246492947,"sku":"4152043899","price":8607.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-71-gallon-tank-mount-dryer-rotary-screw-air-compressor.png?v=1790946107"},{"product_id":"abac-as-5-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-5501TMD 5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 150 PSI, 17.4 CFM, 63 dBA","description":"\u003cp\u003eThe ABAC AS-5501TMD is a complete compressed air station on one skid: a 5 HP rotary screw air end, a 71 gallon air receiver and a refrigerated dryer, arriving mounted and plumbed as a single unit. This is the 150 PSI build, delivering 17.4 CFM and running at 63 dBA, quiet enough to sit in the work area instead of a separate compressor room. There is no separate tank or dryer to source, site and pipe, and nothing to size against each other after the fact. Choose 230V single-phase (AS-5501TMD) or 208-230-460V three-phase (AS-5503TMD); both are the same machine.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-5501TMD (230V single-phase) and AS-5503TMD (208-230-460V three-phase)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 17.4 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 63 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 571 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 56 x 23 x 55 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of a piston\u003c\/h3\u003e\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw runs, which is why shops that use air most of the day move to one. There is no duty cycle to watch, line pressure stays flat through a shift instead of sagging and recovering, and at 63 dBA this is the quietest machine in the AS-B range. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded rather than starting and stopping all day. The 71 gallon tank on this build is matched to the air end for exactly that reason.\u003c\/p\u003e\u003ch3\u003eWhat the integrated dryer changes\u003c\/h3\u003e\u003cp\u003eEvery compressor makes water. Air leaves the air end hot and saturated, and as it cools in the receiver and the shop piping that moisture drops out as liquid, carrying into tools, regulators, pneumatic controls and anything being sprayed. The refrigerated dryer on this unit chills the air and condenses that water out before it reaches the distribution piping, so what leaves the skid is dry enough for paint work, tire service and air actuated equipment. On a bare compressor you would buy a dryer separately, find floor space beside it and pipe the two together; here it is already done and already matched to the output.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 5 HP AS-B builds the choice is pressure, tank and dryer. If your tools run at normal shop pressure, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e125 PSI version of this same package\u003c\/a\u003e trades the higher setting for more flow, 20.3 CFM instead of 17.4. If you already have dry air or do not need it, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003esame tank mount without the dryer\u003c\/a\u003e is the shorter machine and the lower price. If you already own a receiver and want to keep it, the \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI base mount\u003c\/a\u003e is the same air end at 335 lbs with nothing under it. Stepping up, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e7.5 HP tank mount with dryer\u003c\/a\u003e puts 27.1 CFM on the same 71 gallon tank at 67 dBA, which is the move when two people are on air at once.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, automotive service and tire bays, cabinet and woodworking shops, small production and fabrication floors, packaging and pneumatic control systems, and any operation where water in the air line is causing rejects, fisheyes or tool wear. The 150 PSI rating suits shops running tools or equipment that need line pressure above the usual 125 PSI, and the 63 dBA sound level means it can live in the shop rather than in a closet.\u003c\/p\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. The dryer draws power alongside the compressor, so plan the circuit for the package rather than for the motor alone. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals for you. Add a filter regulator at each drop if the air feeds spray equipment. Call us with your own flow and duty cycle and we will check this machine against the demand before you pipe it in.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e lineup, the \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed screw compressors\u003c\/a\u003e, and our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54709830123795,"sku":"4152044126","price":8607.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54709830156563,"sku":"4152043900","price":8607.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-71-gallon-tank-mount-dryer-rotary-screw-air-compressor_f62b8937-eb40-4f0e-8db4-c3abdf17d788.png?v=1790946156"},{"product_id":"abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5251BM 7.5 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 30.5 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5251BM is the 7.5 HP base mount machine in the AS-B screw range, a rotary screw air compressor that delivers 30.5 CFM at 125 PSI and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. Base mount means it ships without a tank, so it plumbs into a receiver you already own or one sized to the job. Choose 230V single-phase (AS-7.5251BM) or 208-230-460V three-phase (AS-7.5253BM); both are the same machine in the same 32 by 24 inch cabinet.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5251BM (230V single-phase) and AS-7.5253BM (208-230-460V three-phase)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 30.5 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank\u003c\/li\u003e\n\u003cli\u003eWeight: 360 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of a piston\u003c\/h3\u003e\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw runs, which is why shops that use air most of the day move to one. There is no duty cycle to watch, line pressure stays flat through a shift instead of sagging and recovering, and at 67 dBA the noise sits well below a comparable reciprocating machine. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded rather than starting and stopping all day.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eAcross the AS-B range the air end scales with the motor on the same footprint. The \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e5 HP base mount\u003c\/a\u003e gives 20.3 CFM at 335 lbs, this 7.5 HP gives 30.5 CFM at 360 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP base mount\u003c\/a\u003e gives 36.4 CFM at 419 lbs, all three in the same 32 by 24 by 40 inch cabinet, so stepping up buys flow rather than floor space. The 10 HP is three-phase only. If line pressure matters more than volume, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI build of this same machine\u003c\/a\u003e trades down to 27.1 CFM for the higher setting. If you do not already own a receiver, the same 7.5 HP air end comes tank mounted on a \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e71 gallon\u003c\/a\u003e or \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e131 gallon\u003c\/a\u003e tank, and with an integrated dryer on the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e71 gallon\u003c\/a\u003e and \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e131 gallon\u003c\/a\u003e builds.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service and tire bays, small production and fabrication floors, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. The base mount build is also the one to buy when you are replacing the compressor on an existing system and keeping the receiver and piping already in place.\u003c\/p\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eGive the cabinet clear air on the cooling side and keep it out of a hot corner, run it on its own circuit sized to the motor nameplate, and size the receiver to the demand rather than to the pipe. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals for you. Compressed air leaving any screw carries moisture, so if the air goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL\u003c\/a\u003e dryers run on standard shop power and are rated to 232 PSI. Call us with your own flow and duty cycle and we will size the dryer against this machine before you pipe it in.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e lineup, the \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed screw compressors\u003c\/a\u003e, and our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54710096757011,"sku":"4152044117","price":6689.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54710096789779,"sku":"4152043885","price":6689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-base-mount-rotary-screw-air-compressor.png?v=1789431121"},{"product_id":"abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5501BM 7.5 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 27.1 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5501BM is a 7.5 HP base mount rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 27.1 CFM at 150 PSI and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting suits tools and equipment that need more than a standard 125 PSI line. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 360 lbs in a 32 x 24 x 40 in cabinet it takes about as much floor as a two drawer file cabinet. Choose 230V single-phase (AS-7.5501BM) or 208-230-460V three-phase (AS-7.5503BM).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5501BM (part number 4152044118) and AS-7.5503BM (part number 4152043886)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 27.1 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 360 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds a steady line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, and ABAC pairs it with an energy efficient motor and a digital controller that handles programmed maintenance, so the service schedule is on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 5 to 20 HP range the pressure, the airflow and the mounting all move independently. The \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251BM\u003c\/a\u003e is the same machine set for 125 PSI, which trades pressure for airflow at 30.5 CFM in the identical 360 lb cabinet. Stepping down, the \u003ca href=\"\/products\/abac-as-5-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501BM\u003c\/a\u003e holds the same 150 PSI on 5 HP at 17.4 CFM and a quieter 63 dBA. Stepping up, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e reaches 34.1 CFM at 150 PSI and 69 dBA. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM7\u003c\/a\u003e puts the same air end on a 71 gallon tank, and the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TMD7\u003c\/a\u003e adds an integrated dryer in the same package. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer included.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. At 27.1 CFM it will keep several air ratchets, a sander and a blow off station fed through a full shift. The 150 PSI setting matters where a long pipe run, a high pressure impact tool or a piece of production equipment needs headroom above the usual 125 PSI shop line. At 67 dBA it is quiet enough to leave near the point of use, which saves the piping run a separate compressor room would cost.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 27.1 CFM the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35 refrigerated air dryer\u003c\/a\u003e is the matching size, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54710567239955,"sku":"4152044118","price":6689.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54710567272723,"sku":"4152043886","price":6689.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-base-mount-150-psi-rotary-screw-air-compressor.png?v=1789434751"},{"product_id":"abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5251TM7 7.5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 125 PSI, 30.5 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5251TM7 is the 7.5 HP AS-B rotary screw delivered as a finished package: the compressor, the controller and a 71 gallon ASME air receiver on one skid, wired and plumbed, so installation is a power drop and a line out. It makes 30.5 CFM at a 125 PSI maximum and runs at 67 dBA, quiet enough to live in the work area rather than a separate compressor room. A rotary screw is rated for continuous duty, so unlike a piston machine it does not need to rest between jobs, and the 71 gallon receiver is there to smooth demand rather than to be the air supply. Choose 230V single-phase (AS-7.5251TM, part 4152044121) or 208-230-460V three-phase (AS-7.5253TM, part 4152043891).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5251TM \/ AS-7.5253TM (store reference AS-7.5251TM7)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, direct drive to an integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eAir delivery: 30.5 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eReceiver: 71 gallon tank mount\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 507 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 63 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDuty cycle: 100 percent, continuous running\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eInside the AS-B 7.5 HP range the air end is the same and the configuration is what changes. The \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003ebase mount AS-7.5251BM\u003c\/a\u003e is the same compressor with no tank at 360 lbs and 32 x 24 x 40 in, for shops that already own a receiver. Step up to the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003elarger tank mount\u003c\/a\u003e at 655 lbs if demand is spiky and you want more stored air. The \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD7 with integrated dryer\u003c\/a\u003e adds refrigerated drying on the same 71 gallon footprint at 593 lbs. Pressure is the other axis: the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI build\u003c\/a\u003e of this same machine trades flow for line pressure, 27.1 CFM instead of 30.5 CFM. If 30.5 CFM is already tight, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253TM7\u003c\/a\u003e gives 36.4 CFM on the same 71 gallon platform.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service and tire bays running impacts and lifts all day, small fabrication and welding shops, cabinet and woodworking shops running sanders and nailers, auto body and finishing work, and any operation where a piston compressor is cycling hard enough to overheat or to keep the shop loud. At 30.5 CFM this machine comfortably covers two or three technicians on intermittent tools, a single sander or orbital, or a small plasma cutter. Sandblasting and multiple simultaneous impact wrenches want more air; size up from the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw range\u003c\/a\u003e for that work.\u003c\/p\u003e\u003ch3\u003eInstallation and air treatment\u003c\/h3\u003e\u003cp\u003eLeave roughly 3 feet of clearance on the cooling air side, keep the room between 40 and 104 F, and run the unit on a dedicated circuit sized to the motor nameplate. Oil, oil filter and separator element are the scheduled service items and the controller tracks the intervals for you. A screw compressor discharges warm, saturated air, so if that air reaches paint, tires, pneumatic controls or anything that dislikes moisture, pair this unit with a dryer sized above its output: the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35 refrigerated dryer\u003c\/a\u003e at 35 CFM covers 30.5 CFM with headroom, and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e runs from 15 to 250 CFM.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e or the wider range of \u003ca href=\"\/collections\/air-compressors\"\u003estationary air compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54710735339795,"sku":"4152044121","price":7051.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54710735372563,"sku":"4152043891","price":7055.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor_4582b096-d7e2-4dcc-ac33-d2f9d636a960.png?v=1789761407"},{"product_id":"abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5501TM7 7.5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 150 PSI, 27.1 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5501TM7 is a 7.5 HP rotary screw air compressor shipped already mounted on a 71 gallon air receiver, so it lands as one package with no separate tank to source or plumb. It delivers 27.1 CFM at a 150 PSI maximum and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. A screw compressor is built for continuous duty, so unlike a piston machine it holds line pressure through a full shift rather than recovering between jobs. Choose 230V single-phase (AS-7.5501TM7, part 4152044122) or 208-230-460V three-phase (AS-7.5503TM7, part 4152043892).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5501TM7 (230V 1-phase) \/ AS-7.5503TM7 (208-230-460V 3-phase)\u003c\/li\u003e\n\u003cli\u003ePart numbers: 4152044122 \/ 4152043892\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 27.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eReceiver: 71 gallon, compressor tank mounted\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 507 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 63 x 23 x 57 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 7.5 HP family the decision comes down to pressure, receiver size and whether air treatment is in the package. The \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI build on the same 71 gallon tank\u003c\/a\u003e delivers 30.5 CFM instead of 27.1, so take this 150 PSI version when line pressure rather than raw volume is the constraint, for instance a long pipe run or equipment that specifies more than a standard 125 PSI supply. The \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003ebase mount\u003c\/a\u003e is the same compressor without a tank at 360 lbs and a 32 x 24 x 40 in footprint, for shops that already own a receiver. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount\u003c\/a\u003e carries a larger receiver for longer run and rest cycles, and the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e71 gallon tank mount with dryer\u003c\/a\u003e adds an integrated refrigerated dryer so compressor, receiver and air treatment arrive as a single 3-in-1 unit.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive service bays, tire shops, small production and fabrication floors, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. The 150 PSI rating adds headroom over the 125 PSI build when equipment downstream calls for a higher line pressure, or when a long run of pipe eats into pressure at the point of use. The 71 gallon receiver keeps the machine from short cycling on intermittent demand, which is the quickest way to shorten the life of any screw compressor.\u003c\/p\u003e\u003ch3\u003eInstallation and service\u003c\/h3\u003e\u003cp\u003eLeave clearance on the cooling air side so the unit can move air freely, keep the room ventilated and above freezing, and run the compressor on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the routine service items, and the digital controller tracks the intervals for you. If the air feeds paint, tires, instrumentation or anything else that will not tolerate moisture, add a \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e and filtration downstream, or step across to the tank mount with dryer build.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the full range of \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, or browse \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e if you are specifying air treatment at the same time.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 138 PSI for 150 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54710893805843,"sku":"4152044122","price":7051.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54710893838611,"sku":"4152043892","price":7055.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor.png?v=1789441592"},{"product_id":"abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5251TM 7.5 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 30.5 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5251TM is the 125 PSI, 131 gallon tank mount build of the 7.5 HP machine in the AS-B screw range. It delivers 30.5 CFM at a 125 PSI maximum and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the higher airflow setting offered on the 7.5 HP air end, so it is the one to specify when the shop is short of air rather than short of pressure. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 655 lbs it is the large receiver option in the 7.5 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Choose 230V single-phase (AS-7.5251TM) or 208-230-460V three-phase (AS-7.5253TM).\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModels: AS-7.5251TM (part number 4152044123) and AS-7.5253TM (part number 4152043893)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 30.5 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 655 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM\u003c\/a\u003e is the identical 655 lb package set for 150 PSI, trading 3.4 CFM of airflow for the extra pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM7\u003c\/a\u003e carries the same 30.5 CFM on a 71 gallon receiver at 507 lbs and a 63 x 23 in footprint. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated at 741 lbs, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251BM\u003c\/a\u003e is the bare 360 lb base mount at the same pressure and airflow. Stepping down, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-5251TM\u003c\/a\u003e gives 20.3 CFM at a quieter 63 dBA; stepping up, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e carries 36.4 CFM at 69 dBA on the same receiver. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eAutomotive and fleet service bays, tire and truck shops, small production and fabrication floors, cabinet and woodworking shops, plasma tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. At 30.5 CFM it will keep a pair of air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores well over twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst. The tank mount build is the one to buy for a shop starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 30.5 CFM the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e is the matching size and the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eCOOL 50\u003c\/a\u003e leaves headroom for a later expansion, and both run on 115V so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54719053496595,"sku":"4152044123","price":7380.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54719053529363,"sku":"4152043893","price":7380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_f0271557-56be-4fa8-b4d8-595d216f0256.png?v=1790946147"},{"product_id":"abac-as-7-5-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5501TM 7.5 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 27.1 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5501TM is the 150 PSI, 131 gallon tank mount build of the 7.5 HP machine in the AS-B screw range. It delivers 27.1 CFM at a 150 PSI maximum and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the higher pressure setting offered on the 7.5 HP air end, so it is the one to specify when a tool or a process needs more than the 125 PSI a standard shop supply gives. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 655 lbs it is the large receiver option in the 7.5 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Choose 230V single-phase (AS-7.5501TM) or 208-230-460V three-phase (AS-7.5503TM).\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModels: AS-7.5501TM (part number 4152044124) and AS-7.5503TM (part number 4152043894)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 27.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 655 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eFully integrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is designed to limit air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM\u003c\/a\u003e is the identical 655 lb package set for 125 PSI, which buys back 3.4 CFM of airflow if your tools are happy at the lower pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM7\u003c\/a\u003e carries the same 27.1 CFM at 150 PSI on a 71 gallon receiver at 507 lbs and a 63 x 23 in footprint. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated at 741 lbs, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM\u003c\/a\u003e is the bare 360 lb base mount at the same pressure and airflow on a 32 x 24 in footprint. Stepping down, the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TM\u003c\/a\u003e gives 17.4 CFM at a quieter 63 dBA; stepping up, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e carries 34.1 CFM at 69 dBA on the same receiver. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eAutomotive and fleet service bays, tire and truck shops, small production and fabrication floors, cabinet and woodworking shops, plasma tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. The 150 PSI rating suits shops running impact tools, pneumatic presses or clamping equipment that need pressure above the common 125 PSI setting, and it leaves room for the pressure drop a long header and a filter set will cost you before the air reaches the tool. At 27.1 CFM it will keep a pair of air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores well over twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. Air leaving any screw is hot and saturated, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 27.1 CFM the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e is the matching size and the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eCOOL 50\u003c\/a\u003e leaves headroom for a later expansion, and both run on 115V so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 138 PSI for 150 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e\n","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54719099896083,"sku":"4152044124","price":7380.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54719099928851,"sku":"4152043894","price":7380.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_5d485745-1b47-4406-a5f6-be334c1440df.png?v=1790946147"},{"product_id":"abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5251TMD7 7.5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 125 PSI, 30.5 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5251TMD7 is a complete compressed air station on one base: a 7.5 HP rotary screw compressor, a 71 gallon air receiver and an integrated refrigerated dryer, mounted and plumbed together at the factory. It delivers 30.5 CFM at 125 PSI and runs at 67 dBA, quiet enough to sit in the work area rather than in a separate compressor room. At 60 x 23 x 57 in it is the compact way to put clean, dry shop air on one footprint, so installation comes down to setting it in place, wiring it and connecting the air line. Choose 230V single-phase (AS-7.5251TMD7) or 208-230-460V three-phase (AS-7.5253TMD7).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5251TMD7 (part number 4152044127) and AS-7.5253TMD7 (part number 4152043901)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 30.5 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 71 gallon air receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer\u003c\/li\u003e\n\u003cli\u003eCompressor, receiver and dryer on a single base\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eDimensions: 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eWeight: 593 lbs\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, oil carryover under 5 ppm across the AS screw range\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of a piston\u003c\/h3\u003e\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw runs, which is why shops that use air most of the day move to one. There is no duty cycle to watch, line pressure stays flat through a shift instead of sagging and recovering, and ABAC rates a comparable piston machine as much as 20 dBA louder than a screw. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded rather than starting and stopping all day. On this build the 71 gallon receiver is already matched to the air end, so that sizing decision is made for you.\u003c\/p\u003e\u003ch3\u003eWhat is inside\u003c\/h3\u003e\u003cp\u003eThe AS-B range is built around a fully integrated aluminum block air end, which keeps the rotors, bearings and oil circuit in one casting rather than a bolted assembly, and ABAC pairs it with an eco friendly three stage vertical oil separation process. Vertical separation reduces the risk of condensation building up and corroding the separator circuit, and it holds oil carryover under 5 ppm, so what reaches your tools and your finish is cleaner than a piston machine will deliver. The energy efficient motor and the compact cabinet limit air loss and standby losses, and the digital controller gives menu driven operation, programmed maintenance intervals and running hours at a glance rather than a pressure switch and a guess.\u003c\/p\u003e\u003ch3\u003eWhat the integrated dryer buys you\u003c\/h3\u003e\u003cp\u003eAir leaving any compressor is warm and saturated. As it cools in the piping that moisture drops out as liquid water, and it ends up in the tool, the finish, the cylinder or the control valve at the far end of the run. A refrigerated dryer chills the air at the compressor so the water condenses and drains there instead of travelling down the line. Buying it integrated rather than as a separate box means one electrical connection, one footprint, no interconnecting pipework to get wrong, and a dryer already matched to this compressor's output rather than guessed at. For paint and finishing work, pneumatic controls, plasma tables and tire service, drying at the source is the difference between a system that works and one that is always being chased with traps and filters.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 7.5 HP range the differences come down to storage, air treatment and pressure. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount with dryer\u003c\/a\u003e is the same compressor and dryer on a larger receiver at 741 lbs and a 76 in long footprint, which is the better buy if several bays pull at once or the floor space is there. Drop the dryer and the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e71 gallon tank mount\u003c\/a\u003e comes down to 507 lbs for a shop that already has air treatment downstream. The \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e150 PSI version of this machine\u003c\/a\u003e trades air delivery for pressure at 27.1 CFM, so choose on whether your tools are short of volume or short of pressure. Shops replacing a compressor on existing piping can take the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003ebase mount build\u003c\/a\u003e at 360 lbs on a 32 x 24 x 40 in footprint. If demand is already outrunning 30 CFM, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253TMD7\u003c\/a\u003e steps the same package up to 36.4 CFM, and the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e5 HP AS-5251TMD\u003c\/a\u003e covers a lighter shop at 20.3 CFM.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC builds the AS-B range for professional and industrial work where the air supply has to be continuous and the operating conditions are hard on equipment: heavy assembly, production line assembly, and cleaning and preparation work. In practice that usually looks like automotive and fleet service bays, tire shops, cabinet and woodworking shops, paint and finishing lines, and small production floors where moisture in the air line causes rejects or shortens tool life. Drying the air at the compressor keeps condensate out of the distribution piping instead of leaving it for traps and filters downstream to catch.\u003c\/p\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and leave working room at the service panels. The unit measures 60 x 23 x 57 in and weighs 593 lbs, so plan the route in and the pad it sits on before it arrives. Run it on its own circuit sized to the motor nameplate, and confirm the supply matches the version you order, because the single-phase and three-phase builds are different part numbers. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals for you. Call us with your own flow and duty cycle and we will check this machine against the demand before you pipe it in.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, the \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed screw compressors\u003c\/a\u003e, and our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e if you are treating air for an existing machine.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at 109 PSI for 125 PSI max units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54719223726355,"sku":"4152044127","price":9379.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54719223759123,"sku":"4152043901","price":9348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-71-gallon-tank-mount-dryer-rotary-screw-air-compressor_aaa8ef11-6d4c-4395-9657-b5c9de12b35a.png?v=1790946156"},{"product_id":"abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5501TMD7 7.5 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 150 PSI, 27.1 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5501TMD7 is a complete compressed air station in one package: a 7.5 HP rotary screw compressor, a 71 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 27.1 CFM at 150 PSI and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. The whole station weighs 593 lbs and stands on a 60 x 23 in footprint, so it occupies one position against a shop wall where a compressor, a receiver and a standalone dryer would need three. Choose 230V single-phase (AS-7.5501TMD7) or 208-230-460V three-phase (AS-7.5503TMD7).\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModels: AS-7.5501TMD7 (part number 4152044128) and AS-7.5503TMD7 (part number 4152043902)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 27.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 593 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 71 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eOn identical hardware, pressure and airflow trade directly against each other, and this machine sits at the pressure end of that trade. The \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD7\u003c\/a\u003e is the same 593 lb package set for 125 PSI at 30.5 CFM, so stepping from 125 to 150 PSI costs about 3.4 CFM on the same 7.5 HP motor. Buy pressure only to the level your highest tool actually needs. If drying is already handled elsewhere in the shop, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM7\u003c\/a\u003e is this same 71 gallon build without the dryer at 507 lbs, and the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM\u003c\/a\u003e is the bare base mount at 360 lbs on a 32 x 24 in footprint for a shop that already owns a receiver. For longer runs between stops, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TMD\u003c\/a\u003e puts the same 27.1 CFM on a larger receiver at 741 lbs and a 76 x 24 in footprint. Below this machine the \u003ca href=\"\/products\/abac-as-5-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-5501TMD\u003c\/a\u003e holds 150 PSI at 17.4 CFM, and above it the three-phase \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e reaches 34.1 CFM on the same 71 gallon footprint at 653 lbs.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, automotive service bays, tire shops, cabinet and woodworking shops, and small production floors where moisture in the air line causes rejects or tool wear. The 150 PSI rating suits shops running impact tooling, clamping fixtures or equipment that calls for more line pressure than a 125 PSI station can hold, and it leaves headroom for a long pipe drop without the pressure at the far end falling below what the tool is rated for. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 67 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the package over a bare base mount machine.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Confirm your piping, fittings and hose are rated above 150 PSI before you commission it. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C, with CFM quoted at 138 PSI for 150 PSI maximum units. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54719365841171,"sku":"4152044128","price":9379.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54719370723603,"sku":"4152043902","price":9348.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-71-gallon-tank-mount-dryer-rotary-screw-air-compressor_013e2b51-f5fb-4a77-bb27-dd8da3480ca9.png?v=1790946157"},{"product_id":"abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5251TMD 7.5 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 30.5 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5251TMD is a complete compressed air station on one base: a 7.5 HP rotary screw compressor, a 131 gallon air receiver and an integrated refrigerated dryer, mounted and plumbed together at the factory. It delivers 30.5 CFM at 125 PSI and runs at 67 dBA, quiet enough to sit in the work area rather than in a separate compressor room. There is no tank and no dryer to size, site and pipe, so installation comes down to setting it in place, wiring it and connecting the air line. Choose 230V single-phase (AS-7.5251TMD) or 208-230-460V three-phase (AS-7.5253TMD).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5251TMD (part number 4152044129) and AS-7.5253TMD (part number 4152043903)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 30.5 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon air receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer\u003c\/li\u003e\n\u003cli\u003eCompressor, receiver and dryer on a single base\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eWeight: 741 lbs\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of a piston\u003c\/h3\u003e\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw runs, which is why shops that use air most of the day move to one. There is no duty cycle to watch, line pressure stays flat through a shift instead of sagging and recovering, and at 67 dBA the machine sits well below a comparable reciprocating unit. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded rather than starting and stopping all day. On this build the 131 gallon receiver is already matched to the air end, so that sizing decision is made for you.\u003c\/p\u003e\u003ch3\u003eWhat the integrated dryer buys you\u003c\/h3\u003e\u003cp\u003eAir leaving any compressor is warm and saturated. As it cools in the piping that moisture drops out as liquid water, and it ends up in the tool, the finish, the cylinder or the control valve at the far end of the run. A refrigerated dryer chills the air at the compressor so the water condenses and drains there instead of travelling down the line. Buying it integrated rather than as a separate box means one electrical connection, one footprint, no interconnecting pipework to get wrong, and a dryer already matched to this compressor's output rather than guessed at. For paint and finishing work, pneumatic controls, plasma tables and tire service, drying at the source is the difference between a system that works and one that is always being chased with traps and filters.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 7.5 HP range the differences come down to storage, air treatment and pressure. The \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e71 gallon tank mount with dryer\u003c\/a\u003e is the same compressor and dryer on a smaller receiver at 593 lbs and a 60 in long footprint, which suits a shop that is tight on floor space and draws air steadily rather than in bursts. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount without a dryer\u003c\/a\u003e is the choice if you already have air treatment downstream. The \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e150 PSI build\u003c\/a\u003e trades airflow for pressure at 27.1 CFM. If you are replacing a compressor on an existing system and keeping the receiver and piping already in place, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003ebase mount build\u003c\/a\u003e is the one to buy at 360 lbs. If the shop is already running short of air, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253TMD\u003c\/a\u003e steps the same package up to 36.4 CFM.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAutomotive and fleet service bays, tire shops, cabinet and woodworking shops, paint and finishing work, and small production floors where moisture in the air line causes rejects or shortens tool life. Drying the air at the compressor keeps condensate out of the distribution piping instead of leaving it for traps and filters downstream to catch. The 131 gallon receiver stores noticeably more air than the 71 gallon build, which helps when several bays pull on impact tools at the same time.\u003c\/p\u003e\u003ch3\u003eSetting it up\u003c\/h3\u003e\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and leave working room at the service panels. The unit measures 76 x 24 x 63 in and weighs 741 lbs, so plan the route in and the pad it sits on before it arrives. Run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller handles menu driven operation and tracks the maintenance intervals for you. Call us with your own flow and duty cycle and we will check this machine against the demand before you pipe it in.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e, built around a fully integrated aluminum block air end, eco friendly vertical oil separation technology and an energy efficient motor. A rotary screw is built for continuous running, so it holds a steady line pressure through a full shift instead of recovering between jobs. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, the \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed screw compressors\u003c\/a\u003e, and our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at 109 PSI. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54719451136275,"sku":"4152044129","price":9932.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54719451169043,"sku":"4152043903","price":9932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/AS-B7.jpg?v=1790177612"},{"product_id":"abac-as-7-5-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-7.5501TMD 7.5 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 27.1 CFM, 67 dBA","description":"\u003cp\u003eThe ABAC AS-7.5501TMD is a complete compressed air station in one package. A 7.5 HP rotary screw air end, a 131 gallon air receiver and a refrigerated dryer arrive mounted and plumbed on a single frame, so there is no separate tank or dryer to source, site and pipe. It delivers 27.1 CFM at a 150 PSI maximum and runs at 67 dBA, quiet enough to sit in the work area instead of a separate compressor room. Choose 230V single-phase (AS-7.5501TMD, part 4152044130) or 208-230-460V three-phase (AS-7.5503TMD, part 4152043904).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AS-7.5501TMD (230V 1-phase, part 4152044130) \/ AS-7.5503TMD (208-230-460V 3-phase, part 4152043904)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 27.1 CFM, rated by ABAC at 138 PSI\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 67 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 741 lbs | Dimensions: 76\" x 24\" x 63\"\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy the three-in-one build\u003c\/h3\u003e\u003cp\u003eBuying compressor, receiver and dryer separately means three deliveries, three footprints and interconnecting pipe that has to be sized, supported and leak tested. This build arrives as one unit on one pad. The dryer sits downstream of the receiver, so water drops out before it reaches the distribution piping, and the 131 gallon receiver gives the screw somewhere to put air during demand spikes instead of loading and unloading against a short line. For a shop with one electrical drop and limited floor space, that is the difference between a day of installation and a week of it.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, automotive service bays, tire shops, cabinet and woodworking shops, and small production floors where moisture in the air line causes rejects or tool wear. At 27.1 CFM this unit carries a dual action sander, a couple of impact wrenches, or a spray gun with headroom, run continuously rather than in bursts. The 150 PSI build trades some flow for higher line pressure against the 125 PSI version, which helps where tools or equipment are rated above a standard 125 PSI supply.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e71 gallon version\u003c\/a\u003e of this same machine is 593 lbs on a 60 x 23 in footprint, which suits a shop that is short on floor space and draws air steadily rather than in heavy bursts. If a receiver and dryer are already installed, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM base mount\u003c\/a\u003e is the same air end without the tank or the dryer. Where flow rather than pressure is the constraint, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e125 PSI build\u003c\/a\u003e on the same receiver gives 30.5 CFM instead of 27.1.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. A rotary screw is built for continuous running, so it holds a steady line pressure through a full shift instead of recovering between jobs. See the full range of \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, or browse \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e if you are adding treatment to a compressor you already own.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54745860243731,"sku":"4152044130","price":9932.0,"currency_code":"USD","in_stock":true},{"title":"208-230-460V 3-Phase","offer_id":54745860276499,"sku":"4152043904","price":9932.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-7-5-131-gallon-dryer-150psi.png?v=1789769144"},{"product_id":"abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253BM 10 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253BM is a 10 HP base mount rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 36.4 CFM at a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 419 lbs in a 32 x 24 x 40 in cabinet it holds the same footprint as the 5 and 7.5 HP machines in the range. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10253BM (part number 4152043887)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 419 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor, lower oil consumption\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds a steady line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, and ABAC pairs it with an energy efficient motor and a digital controller that handles programmed maintenance, so the service schedule is on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 5 to 20 HP range the pressure, the airflow and the mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the same machine set for 150 PSI, which trades airflow for pressure at 34.1 CFM in the identical 419 lb cabinet. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5253BM\u003c\/a\u003e gives 30.5 CFM at the same 125 PSI and 67 dBA for 360 lbs, and stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e reaches 52.1 CFM at 478 lbs in a wider 37 x 28 x 40 in cabinet. If you want more air without more noise, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the same 10 HP at 39.8 CFM and a quieter 65 dBA. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e puts the same air end on a 71 gallon tank at 567 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e adds an integrated dryer at 653 lbs. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer in the same package.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. At 36.4 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two bay shop fed through a full shift. At 69 dBA it is quiet enough to leave on the shop floor near the point of use, which saves the piping run a separate compressor room would cost.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size with headroom, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54745965396243,"sku":"4152043887","price":7771.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-base-mount-rotary-screw-air-compressor.png?v=1789773118"},{"product_id":"abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503BM 10 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503BM is the 150 PSI build of the 10 HP base mount machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting is the one to specify when a tool, a clamp circuit or a plant header needs more than the usual 125 PSI, or when a long pipe run eats pressure before the air reaches the point of use. Base mount means the unit ships without a receiver, so it plumbs into an air tank you already own or one sized to the job. At 419 lbs in a 32 x 24 x 40 in cabinet it takes roughly the floor space of a two drawer file cabinet. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503BM (part number 4152043888)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 419 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a state of the art design that limits air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the same 10 HP machine set for 125 PSI, trading pressure for airflow at 36.4 CFM in the identical 419 lb cabinet. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM\u003c\/a\u003e gives 27.1 CFM at the same 150 PSI for 360 lbs on the same 32 x 24 x 40 in footprint; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e carries 46.4 CFM. If noise matters, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the quieter 10 HP build at 65 dBA and 35.6 CFM on the same pressure setting. If you do not already own a receiver, the same air end comes tank mounted on a \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e71 gallon tank\u003c\/a\u003e or a \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e131 gallon tank\u003c\/a\u003e, and with an integrated dryer on the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e131 gallon build\u003c\/a\u003e. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 34.1 CFM it will keep several air ratchets, a sander or a continuous blow off fed through a shift. The base mount build is also the one to buy when you are replacing the compressor on an existing system and keeping the receiver and piping already in place.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand rather than to the pipe, give the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746126942483,"sku":"4152043888","price":7771.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-base-mount-150-psi-rotary-screw-air-compressor.png?v=1789776638"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TM7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TM7 is the 71 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 36.4 CFM with a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The air end and the receiver arrive as one assembled package, so there is no separate tank to source, set and plumb, and the whole unit lands on a 60 x 23 in footprint. At 567 lbs it is the compact receiver option in the 10 HP family, the one to buy when floor space is tight but you still want stored air. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TM7 (part number 4152043895)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 567 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e is the same package set for 150 PSI, trading airflow down to 34.1 CFM for the extra pressure. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount\u003c\/a\u003e carries the same 36.4 CFM on a larger receiver at 714 lbs. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e is this same 71 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM7\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same 71 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma tables and packaging lines. At 36.4 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The tank mount build is the one to buy for a shop that is starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the sensible match and runs on 115V, so it plugs in beside the compressor without new wiring; step to the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e if the room runs hot or the air feeds finishing work. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746271711507,"sku":"4152043895","price":7604.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor_945e2bc2-4f99-4c70-bb40-0ea71e0d7392.png?v=1789780199"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TM7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TM7 is the 150 PSI, 71 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting is the one to specify when a tool, a clamp circuit or a plant header needs more than the usual 125 PSI, or when a long pipe run eats pressure before the air reaches the point of use. The air end and the receiver arrive as one assembled package on a 60 x 23 in footprint, so there is no separate tank to source, set and plumb. At 567 lbs it is the compact receiver option in the 10 HP family, the one to buy when floor space is tight but you still want stored air. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TM7 (part number 4152043896)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 567 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e is the identical 567 lb package set for 125 PSI, trading the extra pressure for more airflow at 36.4 CFM. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e carries the same 34.1 CFM on a larger receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is this same 71 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM7\u003c\/a\u003e gives 27.1 CFM at 67 dBA on the same 71 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e carries 46.4 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 35.6 CFM on the same 150 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 34.1 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The tank mount build is the one to buy for a shop starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746489651475,"sku":"4152043896","price":7604.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor_61607108-6bc3-43fb-9457-5950c94c3241.png?v=1790869039"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TM is the 125 PSI, 131 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 36.4 CFM at a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the highest airflow setting offered on the 10 HP air end, so it is the one to specify when the shop is short of air rather than short of pressure. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 714 lbs it is the large receiver option in the 10 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TM (part number 4152043897)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 714 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e is the identical 714 lb package set for 150 PSI, trading 2.3 CFM of airflow for the extra pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e carries the same 36.4 CFM on a 71 gallon receiver at 567 lbs and a 60 x 23 in footprint. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure and airflow. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM\u003c\/a\u003e gives 30.5 CFM at 67 dBA on a 131 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM on the same 125 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. At 36.4 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores roughly twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst. The tank mount build is the one to buy for a shop starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746897580307,"sku":"4152043897","price":8114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_efe6b76b-285d-400b-941d-d458b7c46df1.png?v=1790946147"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TM is the 150 PSI, 131 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the pressure setting to specify when a tool or a piece of production equipment is rated above a standard 125 PSI line, and it trades 2.3 CFM against the 125 PSI build to get there. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 714 lbs it is the large receiver option in the 10 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TM (part number 4152043898)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 714 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e is the identical 714 lb package set for 125 PSI, giving 36.4 CFM if your tools do not actually need the extra pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e carries the same 34.1 CFM on a 71 gallon receiver at 567 lbs. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure and airflow. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM\u003c\/a\u003e gives 27.1 CFM at 67 dBA on a 131 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e carries 46.4 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 35.6 CFM on the same 150 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. The 150 PSI setting matters where a press, a clamping fixture, a truck tire bead seater or an older air tool wants more than a 125 PSI header will give after line losses. At 34.1 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores roughly twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54747174109459,"sku":"4152043898","price":8114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_84af8bc2-02a7-4330-8a4e-5089c5c3edce.png?v=1790946149"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TMD7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TMD7 is the 125 PSI, 71 gallon build of the 10 HP machine in the AS-B screw range, and it arrives as a complete air station: compressor, receiver and refrigerated dryer mounted and plumbed as one unit. It delivers 36.4 CFM and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. At 653 lbs on a 60 x 27 in footprint it is the compact receiver option in the 10 HP family, the one to specify when floor space is tight but the air still has to be dry. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TMD7 (part number 4152043905)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 653 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 27 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is why shops running air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is designed to limit air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so operating menus and service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eWhy the dryer is integrated\u003c\/h3\u003e\n\u003cp\u003eAir leaving any compressor is warm and saturated, and it drops that water out in the pipe run where it reaches tools, cylinders and finishes. Buying the dryer already mounted and plumbed removes a separate purchase, a separate footprint and the fittings between the two. It also means the dryer is correctly sized to this machine's 36.4 CFM from the start, which is the step most often got wrong when a dryer is added later. If you prefer to keep the dryer separate, pair the plain tank mount with a standalone unit from our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and dryer all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e is the same 71 gallon package without the dryer, 86 lbs lighter at 567 lbs and 4 in narrower. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is this identical 653 lb machine set for 150 PSI, trading airflow down to 34.1 CFM for the extra pressure. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e carries the same 36.4 CFM and dryer on a larger receiver. If you already own a tank and a dryer, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD7\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same 71 gallon tank. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, plasma and laser tables, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. Allow clearance on the cooling air side, keep the room between roughly 40 and 104 F, and run the machine on its own circuit sized to the motor nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e lineup.\u003c\/p\u003e\n","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54747589345555,"sku":"4152043905","price":8704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-125-psi-rotary-screw-air-compressor.png?v=1789794353"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TMD7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TMD7 is a complete compressed air station in one package. It delivers 34.1 CFM at 150 PSI and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. Compressor, 71 gallon air receiver and refrigerated dryer arrive mounted and plumbed as a single factory assembly, so there is no separate tank or dryer to source, site and pipe. Installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TMD7 (part number 4152043906)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 653 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 27 x 57 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eRated for 100 percent continuous duty\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 71 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the AS-B tank mount with dryer builds the choice is flow against line pressure, then storage. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e125 PSI version of this same package\u003c\/a\u003e gives 36.4 CFM on an identical 653 lb, 60 x 27 x 57 in footprint, so if your tools run happily at 125 PSI you gain about 2 CFM for nothing. Step down a size and the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e7.5 HP 150 PSI build\u003c\/a\u003e delivers 27.1 CFM at 67 dBA. Step up in storage and the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e131 gallon version\u003c\/a\u003e carries the same 10 HP air end on a larger receiver at 800 lbs and a 76 x 24 x 63 in footprint, which suits shops that draw in heavy bursts. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e uses the 10S air end for 35.6 CFM at 65 dBA, and if 34.1 CFM is short of what the shop actually draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds 150 PSI at 46.4 CFM. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e is this same 71 gallon build without the dryer, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003ebase mount AS-10503BM\u003c\/a\u003e is the compressor on its own for a plant that already owns a receiver.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI rating suits shops running tools or equipment rated above the common 125 PSI setting, where a press, a clamping fixture or a truck tire bead seater wants more than a 125 PSI header will give after line losses. At 60 x 27 x 57 in the whole station fits against a wall rather than needing a dedicated room, and at 653 lbs it is the lighter of the two 10 HP dryer packages to rig into place.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. Because the 71 gallon receiver is on the smaller side for 34.1 CFM, a shop with heavy intermittent draws such as impact tools, blow off stations or cabinet blasting should either add a secondary receiver downstream or specify the 131 gallon build instead.\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54748071919891,"sku":"4152043906","price":8704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-150-psi-rotary-screw-air-compressor.png?v=1789797956"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 36.4 CFM at 125 PSI and runs at 69 dBA. Nothing has to be sourced, sited and piped separately, so installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TMD (part number 4152043907)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 800 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the 10 HP AS machines, pressure and airflow trade directly against each other on the same hardware. This is the 125 PSI build, which is the airflow end of that trade at 36.4 CFM; the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e is the identical package set for 150 PSI at 34.1 CFM. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 714 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare base mount at 419 lbs on a 32 x 24 in footprint for a plant that already owns a receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e is the same compressor and dryer on a 71 gallon receiver at 653 lbs, which fits a tighter floor plan but stores roughly 60 gallons less air, so heavy intermittent draws hit the air end harder. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e uses the 10S air end for 39.8 CFM at 65 dBA, and if 36.4 CFM is short of what the tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e holds 125 PSI at 52.1 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 125 PSI this is the build to specify when the shop wants volume rather than pressure: more air for sanders, blow-off stations and multiple bays running at once, on a receiver large enough that a sudden heavy draw does not pull the header down.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; CFM quoted at 109 PSI for 125 PSI maximum units. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54748644213011,"sku":"4152043907","price":9153.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-125-psi-rotary-screw-air-compressor_664a24e6-d2d7-4490-a34c-dc291b72bf6f.png?v=1790372127"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA. This is the pressure setting to specify when a tool or a piece of production equipment is rated above a standard 125 PSI line, and it trades 2.3 CFM against the 125 PSI build to get there. Nothing has to be sourced, sited and piped separately, so installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TMD (part number 4152043908)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 800 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the 10 HP AS machines, pressure and airflow trade directly against each other on the same hardware. This is the 150 PSI build; the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e is the identical 800 lb package set for 125 PSI at 36.4 CFM, which is the one to buy if the tool list does not actually need the extra pressure. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 714 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare base mount at 419 lbs on a 32 x 24 in footprint for a plant that already owns a receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is the same compressor and dryer on a 71 gallon receiver at 653 lbs, which fits a tighter floor plan but stores roughly 60 gallons less air, so heavy intermittent draws hit the air end harder. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e uses the 10S air end for 35.6 CFM at 65 dBA, and if 34.1 CFM is short of what the shop draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds 150 PSI at 46.4 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI setting earns its place where a press, a clamping fixture, a truck tire bead seater or an older air tool wants more than a 125 PSI header will give after line losses. The 131 gallon receiver stores roughly 60 gallons more air than the 71 gallon build, which softens the effect of short heavy draws such as impact tools, blow-off stations and cabinet blasting.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67527774109971,"sku":"4152043908","price":9153.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-131gal-tank-mount-dryer-150-psi-rotary-screw-air-compressor.png?v=1790373943"},{"product_id":"abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253BM 10 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253BM is the quiet, higher output 10 HP machine in the AS-B range. It delivers 39.8 CFM at a 125 PSI maximum and runs at just 65 dBA, which is about 4 dBA below the standard AS-10 and quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it uses the wider AS-15 frame rather than the compact AS-10 frame, which is where the extra airflow and the lower noise come from. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S253BM (part number 4152043909)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil consumption\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM for 10S through 20 HP units quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, which keeps oil carryover and condensation low, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B range the pressure, the airflow and the mounting move independently. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the same machine set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e reaches 175 PSI at 29.9 CFM, all three in the identical 454 lb cabinet. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e at the same 125 PSI, this unit gives 3.4 CFM more air and runs 4 dBA quieter for 35 lbs more weight. Stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e reaches 52.1 CFM in the same 37 x 28 x 40 in footprint. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e puts the same air end on a tank mount receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e adds an integrated dryer to that package. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer in one skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, heavy assembly and production line work, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and cleaning and surface preparation. At 39.8 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two to three bay shop fed through a full shift. The 65 dBA rating is the reason to choose this one over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 39.8 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size with headroom, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67543024501011,"sku":"4152043909","price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm_db1579cb-a32c-4272-aefe-8eb931bf6b49.png?v=1790869047"},{"product_id":"abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503BM 10 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503BM is the 150 PSI build of the quiet, higher output 10 HP machine in the AS-B range. It delivers 35.6 CFM free air delivery at a 150 PSI maximum and runs at just 65 dBA, quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it stays compact for a 10 HP screw. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S503BM (part number 4152043910)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver and no dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil carryover\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with three stage vertical oil separation, which keeps oil carryover and air loss low across long duty cycles, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-10S base mount build, pressure and flow trade against each other on the same machine. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-10S253BM\u003c\/a\u003e gives 39.8 CFM and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003e175 PSI AS-10S753BM\u003c\/a\u003e gives 29.9 CFM, both in the identical 454 lb, 37 x 28 x 40 in cabinet as this 150 PSI build at 35.6 CFM. The 150 PSI build is the middle choice, and the one to specify when a long header or a tool rated above the usual 125 PSI shop standard leaves too little margin at the point of use. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e at the same 150 PSI, the AS-10S delivers 35.6 CFM rather than 34.1 and runs 65 dBA rather than 69, which matters when the compressor shares a room with the people using it. If you would rather buy the receiver and the plumbing in one piece, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003etank mount AS-10S503TM\u003c\/a\u003e is the same air end on a receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e adds an integrated dryer to that skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. ABAC builds the AS-B range for heavy assembly, production line assembly, and cleaning and preparation work, the jobs where air demand is close to continuous and the conditions are not gentle. The 65 dBA rating is the reason to choose the AS-10S over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. The \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is rated at 50 CFM, comfortably above this compressor's 35.6 CFM output, which is the margin you want so the dryer is not running at its limit on a hot day, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67543527194899,"sku":"4152043910","price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm_dd0e63d6-3a49-4900-829f-b7a2a0339955.png?v=1790869050"},{"product_id":"abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753BM 10 HP Rotary Screw Air Compressor - Base Mount, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753BM is the 175 PSI build of the quiet, higher output 10 HP machine in the AS-B range. It delivers 29.9 CFM free air delivery at a 175 PSI maximum and runs at just 65 dBA, quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it stays compact for a 10 HP screw. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S753BM (part number 4152043911)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver and no dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil carryover\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with three stage vertical oil separation, which keeps oil carryover and air loss low across long duty cycles, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-10S base mount build, pressure and flow trade against each other on the same machine. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-10S253BM\u003c\/a\u003e gives 39.8 CFM and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-10S503BM\u003c\/a\u003e gives 35.6 CFM, both in the identical 454 lb, 37 x 28 x 40 in cabinet as this 175 PSI build at 29.9 CFM. Specify 175 PSI when a tool or process genuinely needs the pressure rather than as headroom, because you are paying close to 10 CFM for it against the 125 PSI build. If you would rather buy the receiver and the plumbing in one piece, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount AS-10S753TM\u003c\/a\u003e is the same air end on a receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e adds an integrated dryer to that skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. The 175 PSI rating is what to look at when line losses across a long header leave too little margin at the tool, or when a press, a plasma table or a pneumatic clamp is specified above the 125 PSI a standard shop machine delivers. The 65 dBA rating is the reason to choose the AS-10S over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. The \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is rated at 50 CFM, comfortably above this compressor's 29.9 CFM output, which is the margin you want so the dryer is not running at its limit on a hot day, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67544389320979,"sku":"4152043911","price":8499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm.png?v=1790640709"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253TM is the quiet, higher output 10 HP machine in the AS-B range, delivered on a 131 gallon air receiver as one assembled package. It gives 39.8 CFM at a 125 PSI maximum and runs at just 65 dBA, about 4 dBA below the standard AS-10 and quiet enough to stand on the shop floor near the point of use instead of being walled into a compressor room. Because the air end and the tank ship together, installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S253TM (part number 4152043918)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil consumption\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCFM for 10S through 20 HP units quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops running air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, which keeps oil carryover and condensation low, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting move independently. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the identical package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e reaches 175 PSI at 29.9 CFM, so every step up in pressure costs airflow. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e on the same 131 gallon tank at the same 125 PSI, this unit gives 3.4 CFM more air and runs 4 dBA quieter. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the bare 454 lb base mount at the same pressure and airflow. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is this same tank mount build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same receiver; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM at 69 dBA.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, plasma tables, packaging lines, and any operation where a piston compressor is cycling too hard to hold line pressure. At 39.8 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two to three bay shop fed through a full shift. The 131 gallon receiver gives the compressor room to ride out short bursts of heavy demand, so it runs longer and rests longer rather than loading and unloading all day. The 65 dBA rating is the reason to choose this one over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 39.8 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the matching 50 CFM size and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e is the next size up if you want more headroom. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67544941854995,"sku":"4152043918","price":8575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_4b9500e2-6ea7-49db-a8dd-78cb5bbc9ffe.png?v=1790946148"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503TM is a 10 HP rotary screw air compressor and a 131 gallon air receiver supplied as one factory assembly, built for shops that need steady air all shift rather than the stop and start cycle of a piston unit. It delivers 35.6 CFM at 150 PSI and runs at 65 dBA, because this is the quiet 10S air end rather than the standard 10 HP block, so the machine can sit on the shop floor instead of in a separate compressor room. The screw unit and the tank ship mounted and plumbed together, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S503TM (part number 4152043919)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 750 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eSmart digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the quiet air end\u003c\/h3\u003e\n\u003cp\u003eABAC builds two 10 HP air ends. The standard block in the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e gives 34.1 CFM at 150 PSI and 69 dBA on the same size receiver. The 10S block in this machine gives 35.6 CFM at the same pressure and 65 dBA. Four decibels is roughly half the perceived loudness, which is usually what decides whether the compressor gets its own room or lives in the corner of the shop. The extra 1.5 CFM is useful, but the noise figure is the reason most buyers pay the difference. The trade is weight and footprint: 750 lbs over 76 x 27 x 62 in against 714 lbs on the standard build.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware. This machine sits in the middle of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is the same 750 lb package set for 125 PSI at 39.8 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs air. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is this same air end as a bare base mount at 454 lbs on a 37 x 28 in footprint. If 35.6 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e holds 150 PSI at 46.4 CFM on the same 76 x 27 x 62 in platform.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. The 150 PSI rating suits shops running impact tools, pneumatic presses or clamping equipment that need pressure above the common 125 PSI setting, and the 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eAir leaving any rotary screw is hot and saturated, so drying is the next decision rather than an optional extra. If your air feeds paint, pneumatic controls or precision tools, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is this exact machine with a refrigerated dryer fitted and plumbed at the factory, 844 lbs on the same footprint, which removes the job of sizing, siting and piping a separate dryer. A particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. Give the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items and the digital controller tracks the intervals, so keep a spare set on the shelf. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67546950074643,"sku":"4152043919","price":8854.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_6a4b8909-05d8-4af2-8b5b-348578473165.png?v=1790946149"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753TM is a 10 HP rotary screw compressor and a 131 gallon air receiver supplied as one factory assembly, built for shops that need steady air all shift rather than the stop and start cycle of a piston unit. It delivers 29.9 CFM at 175 PSI and runs at 65 dBA, quiet enough to sit on the shop floor instead of in a separate compressor room. This is the quiet 10S air end set to the highest pressure offered on a 10 HP AS machine, so it is the build to specify when a tool on the line genuinely needs 175 PSI rather than more volume. Because the screw unit and the tank ship mounted and plumbed together, installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S753TM (part number 4152043920)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 750 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a tank mounted screw\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The one duty pattern a screw genuinely dislikes is short cycling, and the 131 gallon receiver underneath this machine is what prevents it: the tank absorbs short bursts of demand so the air end runs loaded for useful stretches rather than starting and unloading every few seconds. Buying the compressor and the receiver as a single factory assembly also removes the part of the install that usually goes wrong. There is no separate tank to site, no interconnecting pipe to fabricate and no second set of mounts. The installer lands power and ties into the header. Air leaving any screw comes out hot and saturated, so if the system feeds paint, pneumatic controls or precision tools, plan on drying it; see the comparison below for the factory dryer build.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware, and this machine sits at the pressure end of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the same 750 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e runs 125 PSI at 39.8 CFM. Going from 125 to 175 PSI costs roughly 10 CFM on the same 10 HP motor, so buy pressure only to the level your highest tool actually needs. If you want drying handled in the same package, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e is this same build with an integrated refrigerated dryer at 844 lbs. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint. Within the 10 HP AS machines the 175 PSI rating is offered on the 10S air end only, so this is the 10 HP route to that pressure. If 29.9 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e holds the same 175 PSI at 41.7 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eWork that a 125 or 150 PSI machine cannot cover: pneumatic presses and clamping fixtures, air operated diaphragm pumps, laser cutting assist gas, sandblasting cabinets, and heavy impact tooling that loses torque the moment line pressure drops. It also handles ordinary production and fabrication duty alongside those, with the headroom to run a long pipe drop without the pressure at the far end falling below what the tool is rated for. Automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure are all good fits. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Confirm your piping, fittings and hose are rated above 175 PSI before you commission it, because a system assembled around a 125 PSI machine is not automatically suited to this one. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. There is no dryer fitted to this build, so air treatment is the open decision: a refrigerated dryer sized to 29.9 CFM plus a particulate and coalescing filter set behind it will keep water, pipe scale and oil carryover out of your distribution piping. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67546992902419,"sku":"4152043920","price":7437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_b81a060f-e681-44f3-b97e-fba914c3c0ba.png?v=1790946148"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single assembly. It delivers 39.8 CFM at 125 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the quiet 10S air end, the highest airflow 10 HP machine in the AS-B range, and the 125 PSI build is the one to specify when the shop is short of air rather than short of pressure. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S253TMD (part number 4152043927)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is the same 844 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. If you already have drying handled, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. Against the standard 10 HP air end, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e gives 36.4 CFM at 69 dBA on the same tank, so the 10S buys roughly 3 CFM more air and about 4 dBA less noise for the same 10 HP. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD\u003c\/a\u003e carries 30.5 CFM with a dryer; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e carries 52.1 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing booths, production and fabrication floors, automotive and fleet service bays, tire and truck shops, plasma and laser tables, packaging lines, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. At 39.8 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67574836101395,"sku":"4152043927","price":11787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor.png?v=1790946107"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor on the quiet 10S air end, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 35.6 CFM at 150 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S503TMD (part number 4152043928)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAt 150 PSI this is the middle setting of the three pressures offered on the 10S air end, and on identical hardware pressure and airflow trade directly against each other. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is the same 844 lb package set for 125 PSI at 39.8 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow on the same 10 HP motor. Set against the standard 10 HP package on the same tank, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e delivers 34.1 CFM at 69 dBA, so the 10S buys about 1.5 CFM more air and 4 dBA less noise, which matters when the compressor shares a room with the people using it. If drying is already handled upstream, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. If 35.6 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds the same 150 PSI at 46.4 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, automotive and fleet service bays, tire and truck shops, heavy assembly, cleaning and parts preparation, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI build is the one to choose when tools, presses or a plant header need pressure above the usual 125 PSI shop standard, and the 65 dBA rating lets it sit on the floor it serves rather than in a dedicated room.\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B screw range from the \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e if you are drying an existing system, or browse all \u003ca href=\"\/collections\/air-compressors\"\u003estationary air compressors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted as free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67574893642003,"sku":"4152043928","price":11787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor_6b6d8fdd-a12b-4270-b10a-a6f9b7c113a0.png?v=1790946157"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 29.9 CFM at 175 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the quiet 10S air end set to the highest pressure offered on a 10 HP AS machine, which makes it the build to specify when a tool on the line genuinely needs 175 PSI rather than more volume. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S753TMD (part number 4152043929)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes. At 175 PSI the drying step matters more, not less, because compressing further wrings more water out of the air and that condensate has to leave the system before it reaches your piping.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware, and this machine sits at the pressure end of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is the same 844 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e runs 125 PSI at 39.8 CFM. Going from 125 to 175 PSI costs roughly 10 CFM on the same 10 HP motor, so buy pressure only to the level your highest tool actually needs. If you already have drying handled, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. Within the 10 HP AS machines the 175 PSI rating is offered on the 10S air end only, so this is the 10 HP route to that pressure. If 29.9 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e holds the same 175 PSI at 41.7 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eWork that a 125 or 150 PSI machine cannot cover: pneumatic presses and clamping fixtures, air-operated diaphragm pumps, laser cutting assist gas, sandblasting cabinets, and heavy impact tooling that loses torque the moment line pressure drops. It also handles the ordinary production and fabrication duties alongside those, with the headroom to run a long pipe drop without the pressure at the far end falling below what the tool is rated for. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Confirm your piping, fittings and hose are rated above 175 PSI before you commission it, because a system assembled around a 125 PSI machine is not automatically suited to this one. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575561519379,"sku":"4152043929","price":9976.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor_85b8d769-130c-4521-860d-fff52f8f7e61.png?v=1790946157"},{"product_id":"abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253BM 15 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15 is a 15 HP rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. It delivers 52.1 CFM at 125 PSI and runs at 69 dBA. This is the base mount version, so it ships without a tank and plumbs into an air receiver you already own or one sized to your demand. Power is 208-230-460V three-phase (AS-15253BM), and at 478 lbs on a 37 by 28 inch footprint it sets down in about the space a 60 gallon vertical piston compressor already takes up.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253BM (part number 4152043912)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs | Dimensions: 37\" x 28\" x 40\"\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. A rotary screw is designed for continuous duty, so it holds a steady line pressure through a full shift instead of recovering between jobs.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B range the 15 HP frame is the step most shops make when they add a second bay or a larger blasting or finishing setup. At 52.1 CFM it carries roughly 16 CFM more air than the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253BM\u003c\/a\u003e at the same 125 PSI, and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20253BM\u003c\/a\u003e adds another 8.5 CFM on top of that. Pressure is the other axis: the same 15 HP frame is offered at \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI\u003c\/a\u003e for 46.4 CFM and \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003e175 PSI\u003c\/a\u003e for 41.7 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\u003ch3\u003eBuilding the system around it\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Pair it with a receiver sized to your demand, then add a dryer downstream if your air tools or finishing work need moisture control. At 52.1 CFM the usual pairing is a COOL series dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65 refrigerated air dryer\u003c\/a\u003e. If you would rather buy the tank and the dryer already built in, the same 15 HP air end is sold as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003etank mount with integrated dryer\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575828906259,"sku":"4152043912","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15253bm.png?v=1790899889"},{"product_id":"abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503BM 15 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503BM is a 15 HP base mount rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. It delivers 46.4 CFM at a 150 PSI maximum and runs at 69 dBA. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 478 lbs in a 37 x 28 x 40 in cabinet it keeps the footprint small enough to sit near the point of use. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15503BM (part number 4152043913)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, paired with an energy efficient motor and a controller that handles programmed maintenance, so the service schedule sits on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003ePressure and flow trade against each other on the same machine. This 150 PSI unit moves 46.4 CFM, against 52.1 CFM on the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e at 125 PSI and 41.7 CFM on the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM\u003c\/a\u003e at 175 PSI, all three in the same 478 lb cabinet. Choose 150 PSI when your tools or process genuinely call for it at the point of use rather than at the compressor. Across the HP range the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e gives 34.1 CFM at the same pressure and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503BM\u003c\/a\u003e gives 54 CFM. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e puts the same air end on a tank at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e adds an integrated dryer at 871 lbs.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. At 46.4 CFM it will carry several bays of air tools, a plasma table, or a blast or finishing setup without the pressure sagging when a second operator pulls a trigger.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 46.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size at 50 CFM, and it runs on 115V so it plugs in beside the compressor. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575927832851,"sku":"4152043913","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15503bm.png?v=1790903151"},{"product_id":"abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753BM 15 HP Rotary Screw Air Compressor - Base Mount, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15 is a 15 HP rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. This is the 175 PSI build, delivering 41.7 CFM at 69 dBA, for plants running tooling or processes that specify a higher line pressure than a standard 125 PSI machine will hold. It is the base mount version, so it ships without a tank and plumbs into an air receiver you already own or one sized to your demand. Power is 208-230-460V three-phase (AS-15753BM), and at 478 lbs on a 37 by 28 inch footprint it sets down in about the space a 60 gallon vertical piston compressor already takes up.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753BM (part number 4152043914)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs | Dimensions: 37\" x 28\" x 40\"\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, blasting and finishing booths, and any operation running a tool or process that calls for more line pressure than a 125 PSI machine will hold. A rotary screw is designed for continuous duty, so it maintains a steady line pressure through a full shift instead of recovering between jobs.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003ePressure and airflow trade against each other on the same 15 HP frame. At 175 PSI this unit delivers 41.7 CFM, against 46.4 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-15503BM\u003c\/a\u003e and 52.1 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-15253BM\u003c\/a\u003e, so buy pressure only to the level your highest tool actually needs. Within the 175 PSI line the 10 HP \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e carries 29.9 CFM and the 20 HP \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-20753BM\u003c\/a\u003e carries 48.5 CFM, with this 15 HP frame between them at 41.7 CFM and the quieter 69 dBA of the 15 HP cabinet.\u003c\/p\u003e\u003ch3\u003eBuilding the system around it\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Pair it with a receiver sized to your demand, then add a dryer downstream if your air tools or finishing work need moisture control. At 41.7 CFM the usual pairing is a COOL series dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e, whose 232 PSI maximum working pressure covers a 175 PSI system. If you would rather buy the tank already built in, the same 175 PSI air end is sold as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount\u003c\/a\u003e, or as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003etank mount with an integrated dryer\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577696387347,"sku":"4152043914","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15753bm.png?v=1790947798"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15253TM is a 15 HP rotary screw air compressor shipped on a 131 gallon air receiver, built for shops that need steady air through a full shift rather than the stop and start cycle of a piston unit. It delivers 52.1 CFM at 125 PSI and runs at 69 dBA on 208-230-460V three-phase power. Because the screw unit and the tank arrive as one assembly, installation comes down to setting it in place, wiring it and connecting the air line.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253TM (part number 4152043921)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs | Dimensions: 76\" x 27\" x 62\"\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy the tank is part of the machine\u003c\/h3\u003e\u003cp\u003eA rotary screw is built to run continuously, so the receiver is not there to give the compressor a rest the way a piston machine's tank is. It is there to absorb short bursts of demand, to hold line pressure steady when several tools trigger at once, and to knock some of the condensate out of the air before it reaches your piping. Buying the tank already mounted removes the sizing question, the second footprint and the interconnecting pipe, and it is why most shops replacing a worn out 80 gallon piston unit go straight to a tank mount screw.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B frame the mounting and the pressure move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e is the same air end with no tank at 478 lbs, for a shop that already owns a receiver, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e is this machine with a dryer built onto the same frame at 871 lbs. Moving up in pressure trades airflow in the identical cabinet: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e gives 41.7 CFM at 175 PSI. On volume, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253TM\u003c\/a\u003e delivers 36.4 CFM on the same tank and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20253TM\u003c\/a\u003e steps up to 60.6 CFM at 71 dBA. Pick the pressure first, because every step up costs airflow, then size the air end to the tool list.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. At 69 dBA the package is quiet enough to sit near the point of use instead of in a separate compressor room, and the 131 gallon receiver carries it through short bursts of heavy demand without short cycling.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe compressor and the receiver come as one unit, so what is left is drying, filtration and drainage. At 52.1 CFM the usual match is a refrigerated dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65\u003c\/a\u003e, with a condensate drain on the tank so the water it knocks out actually leaves the system. If you would rather have the dryer factory piped and wired onto the frame, buy the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e instead and skip the second install.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577761431827,"sku":"4152043921","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15253tm.png?v=1790951007"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503TM is the 150 PSI build of the 15 HP machine in the AS-B screw range, delivered on a 131 gallon horizontal receiver as a single assembly. It puts out 46.4 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area rather than a separate compressor room. Tank mount is the configuration to buy when there is no receiver already in the plant: compressor, tank and controls arrive piped and wired together, so installation comes down to setting it on the floor, bringing power to it and connecting the air line. At 776 lbs in a 76 x 27 x 62 in footprint it takes roughly the floor space of a workbench. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-15503TM (part number 4152043922)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a state of the art design that limits air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath this one is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e is the same 15 HP machine set for 125 PSI, trading pressure for airflow at 52.1 CFM on the identical tank, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e goes the other way to 175 PSI and 41.7 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. Stepping down in power, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e gives 34.1 CFM at the same 150 PSI; stepping up, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TM\u003c\/a\u003e carries 54 CFM at 71 dBA. If you already own a receiver, the same air end comes as the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e base mount at 478 lbs on a 37 x 28 x 40 in footprint. If you want drying built in, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e is this exact machine with the refrigerated dryer already mounted and piped.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 46.4 CFM it will keep a bank of air ratchets, a sander and a continuous blow off fed through a full shift, or several bays working at once without the line pressure sagging. The tank mount build is the one to buy for a new installation, or for a shop replacing a worn piston compressor outright, because it takes receiver sizing and tank piping out of the job.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 46.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the minimum size and the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e gives useful headroom; both run on 115V, so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764872467,"sku":"4152043922","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15503tm.png?v=1790951864"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15753TM is the 175 PSI build of the 15 HP machine in the AS-B screw range, shipped on a 131 gallon air receiver as a single assembly. It delivers 41.7 CFM at a 175 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the screw unit and the tank arrive mounted together, installation comes down to setting it in place, wiring it and connecting the air line.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753TM (part number 4152043923)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs | Dimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy 175 PSI costs airflow\u003c\/h3\u003e\u003cp\u003eA screw air end turns the same displacement whatever pressure you ask of it, so every step up in discharge pressure takes volume off the top. In this cabinet that is 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM here at 175 PSI, all from the same 15 HP motor. Specify 175 PSI when a tool or a process genuinely needs it, for example an air over hydraulic press, a high pressure blow off, or a long distribution run that arrives at the bench well below the compressor setpoint. Buying the pressure as headroom costs you a fifth of the air for nothing.\u003c\/p\u003e\u003ch3\u003eWhy the tank is part of the machine\u003c\/h3\u003e\u003cp\u003eA rotary screw is built to run continuously, so the receiver is not there to give the compressor a rest the way a piston machine's tank is. It is there to absorb short bursts of demand, to hold line pressure steady when several tools trigger at once, and to knock condensate out of the air before it reaches your piping. Buying the tank already mounted removes the sizing question, the second footprint and the interconnecting pipe.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B frame the mounting and the pressure move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM\u003c\/a\u003e is the same air end with no tank at 478 lbs, for a shop that already owns a receiver, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e is this machine with a refrigerated dryer built onto the same frame at 871 lbs. Drop the pressure and the airflow comes back: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e gives 52.1 CFM at 125 PSI on the same receiver. If you need 175 PSI and more volume, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20753TM\u003c\/a\u003e holds the same pressure at 48.5 CFM and 71 dBA. Pick the pressure first, then size the air end to the tool list.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, plasma cutting, and any operation running tools rated above 150 PSI where a reciprocating compressor is working too hard to hold line pressure. At 69 dBA the package is quiet enough to sit near the point of use instead of in a separate compressor room, and the 131 gallon receiver carries it through short bursts of heavy demand without short cycling.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe compressor and the receiver come as one unit, so what is left is drying, filtration and drainage. At 41.7 CFM the usual match is a refrigerated dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e, with a condensate drain on the tank so the water it knocks out actually leaves the system. If you would rather have the dryer factory piped and wired onto the frame, buy the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e instead and skip the second install.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764905235,"sku":"4152043923","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15753tm.png?v=1790951864"},{"product_id":"abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-20253BM 20 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 60.6 CFM, 71 dBA","description":"\u003cp\u003eThe ABAC AS-20253BM is a 20 HP rotary screw air compressor for operations that have outgrown a 15 HP machine and need steady air across several bays at once. It delivers 60.6 CFM at 125 PSI and runs at 71 dBA. This is the base mount version, so it ships without a tank and plumbs into an air receiver you already own or one sized to your demand. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-20253BM (part number 4152043915)\u003c\/li\u003e\n\u003cli\u003eMotor: 20 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 60.6 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 71 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 516 lbs | Dimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with programmed maintenance menus\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the footprint buys you\u003c\/h3\u003e\u003cp\u003eThe AS-20 shares the same 37 by 28 inch cabinet as the 15 HP \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e and weighs 516 lbs against its 478 lbs, so stepping up from 52.1 CFM to 60.6 CFM at the same 125 PSI costs no extra floor space. That matters in a plant room that is already full. If the work needs pressure rather than volume, the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-20503BM\u003c\/a\u003e delivers 54 CFM and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003e175 PSI AS-20753BM\u003c\/a\u003e delivers 48.5 CFM from the same 20 HP motor.\u003c\/p\u003e\u003ch3\u003eBase mount or tank mount\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. You pick the receiver, you pick where it sits, and you can oversize the tank to smooth a peaky demand profile without buying a bigger compressor. If you would rather have it arrive as one piece, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003etank mount version\u003c\/a\u003e puts the same air end on an ASME receiver, and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003etank mount with integrated dryer\u003c\/a\u003e adds moisture control in the same package. On a base mount build, size a refrigerated dryer at or above the compressor's 60.6 CFM: see the \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003eABAC COOL refrigerated dryer range\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, multi-bay automotive and fleet service, tire and truck shops, cabinet and woodworking plants, blast and finishing booths, and any operation where a reciprocating compressor is running loaded most of the shift just to hold line pressure. A rotary screw is built for continuous duty, so it keeps a steady line pressure through the whole shift instead of recovering between jobs. The AS-B air end is designed for limited air loss, low oil carryover and low vibration, and the digital controller gives operators scheduled maintenance prompts rather than a guess at service intervals.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B screw range from the Atlas Copco group. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our wider range of \u003ca href=\"\/collections\/air-compressors\"\u003estationary air compressors\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764938003,"sku":"4152043915","price":10318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-20253bm.png?v=1790951864"},{"product_id":"abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-20503BM 20 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 54 CFM, 71 dBA","description":"\u003cp\u003eThe ABAC AS-20503BM is a 20 HP fixed speed rotary screw air compressor for operations that have outgrown a 15 HP machine and need steady air across several bays at once. It delivers 54 CFM at 150 PSI and runs at 71 dBA. This is the base mount version, so it ships without a tank and plumbs into an air receiver you already own or one sized to your demand. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-20503BM (part number 4152043916)\u003c\/li\u003e\n\u003cli\u003eMotor: 20 HP, energy efficient, oil lubricated screw element\u003c\/li\u003e\n\u003cli\u003eAir delivery: 54 CFM free air delivery, measured to ISO 1217 Annex C\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 71 dBA, measured to ISO 2151:2004 by the ISO 9614\/2 sound intensity method\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank and no dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 516 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block with vertical oil separation\u003c\/li\u003e\n\u003cli\u003eDigital controller for operating parameters and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003ePressure and flow trade against each other across the AS-20 range on an identical 516 lb chassis. The \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-20253BM at 125 PSI\u003c\/a\u003e carries 60.6 CFM, this 150 PSI build carries 54 CFM, and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-20753BM at 175 PSI\u003c\/a\u003e carries 48.5 CFM. Specify the pressure your tools actually call for rather than the highest number on the list, because every step up costs flow. One size down, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e15 HP AS-15503BM\u003c\/a\u003e delivers 46.4 CFM at the same 150 PSI. If you would rather not source and plumb a receiver separately, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TM\u003c\/a\u003e arrives on a 131 gallon tank and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TMD\u003c\/a\u003e adds an integrated dryer on the same base.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, machine shops running several cells at once, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, pneumatic controls and conveying, and any operation where a reciprocating compressor is working too hard to hold line pressure. A rotary screw is built for continuous duty, so it holds steady line pressure through a full shift instead of recovering between jobs, and the 37 x 28 x 40 in footprint lets it sit close to the point of use rather than in a dedicated compressor room.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B screw range from the Atlas Copco group, built around a fully integrated aluminum block, eco-friendly vertical oil separation technology, a state of the art airend and an energy efficient motor, which together hold down air loss, vibration and noise. Base mount is the starting point for a modular compressed air system: pair it with a receiver sized to your demand, then add a refrigerated dryer downstream if your air tools, controls or finishing work need moisture control. Size the dryer above this machine's 54 CFM output, which makes the \u003ca href=\"\/products\/abac-cool-75-refrigerated-air-dryer-115v\"\u003eABAC COOL 75\u003c\/a\u003e the usual starting point. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/air-dryers\"\u003eair dryer range\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764970771,"sku":"4152043916","price":10318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-20503bm.png?v=1790951864"},{"product_id":"abac-as-20-20-hp-base-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-20753BM 20 HP Rotary Screw Air Compressor - Base Mount, 175 PSI, 48.5 CFM, 71 dBA","description":"\u003cp\u003eThe ABAC AS-20753BM is a 20 HP rotary screw air compressor for operations that have outgrown a 15 HP machine and need steady air across several bays at once. It delivers 48.5 CFM at 175 PSI and runs at 71 dBA. This is the base mount version, so it ships without a tank and plumbs into an air receiver you already own or one sized to your demand. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-20753BM (ABAC part number 4152043917)\u003c\/li\u003e\n\u003cli\u003eMotor: 20 HP, energy-efficient, 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eAir delivery: 48.5 CFM free air delivery, measured to ISO 1217 Annex C\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 175 PSI maximum\u003c\/li\u003e\n\u003cli\u003eNoise level: 71 dBA, measured to ISO 2151:2004 using ISO 9614\/2\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no tank and no dryer\u003c\/li\u003e\n\u003cli\u003eWeight: 520 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block airend\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology for low oil carryover\u003c\/li\u003e\n\u003cli\u003eDigital controller with programmed maintenance menus\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy this machine\u003c\/h3\u003e\u003cp\u003eThe AS-B airend is ABAC's current generation, built around a fully integrated aluminum block and vertical oil separation that holds oil consumption and air loss down across long duty cycles. The footprint is one of the smallest in its class at 37 x 28 x 40 in, which matters on a base mount unit because it can sit close to the point of use rather than in a dedicated compressor room. The digital controller puts operating pressure, run hours and service intervals on one screen instead of a pressure switch and a guess.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 20 HP base mount build, pressure and flow trade against each other on the same machine: the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-20253BM\u003c\/a\u003e gives 60.6 CFM, the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-20503BM\u003c\/a\u003e gives 54 CFM, and this 175 PSI build gives 48.5 CFM. Specify 175 PSI when a tool or process genuinely needs the pressure, not as headroom, because you are paying roughly 12 CFM for it. If you want the tank and the plumbing solved in one purchase instead, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount AS-20753TM\u003c\/a\u003e is the same compressor on a receiver.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. A rotary screw is designed for continuous duty, so it maintains a steady line pressure through a full shift instead of recovering between jobs.\u003c\/p\u003e\u003ch3\u003ePair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand, then add refrigerated drying if your air tools, paint work or pneumatic controls need moisture out of the line. The \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65 refrigerated air dryer\u003c\/a\u003e is rated above this compressor's 48.5 CFM output, which is the margin you want so the dryer is not running at its limit on a hot day.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765200147,"sku":"4152043917","price":10318.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-20753bm.png?v=1790951864"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15253TMD is the all in one version of ABAC's 15 HP AS-B screw compressor: compressor, 131 gallon receiver and refrigerated air dryer built onto a single frame and shipped as one machine. It delivers 52.1 CFM at a 125 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer is already plumbed and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint it occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253TMD (part number 4152043930)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhat the dryer adds to the package\u003c\/h3\u003e\u003cp\u003eABAC lists the same compressor and tank without the dryer at 776 lbs, so the refrigerated dryer accounts for roughly 95 lbs of the 871 lb total and none of the floor space: the cabinet and the 76 x 27 x 62 in footprint are identical either way. That trade matters more than it sounds. A 15 HP screw pushing 52.1 CFM of warm saturated air into cool shop piping will drop a real volume of water somewhere, and the only open question is whether it comes out at the machine or at the drops above your benches. The factory dryer is matched to the 52.1 CFM this unit actually produces, so there is no sizing exercise, no second electrical circuit, and no mismatch between a compressor bought this year and a dryer added later.\u003c\/p\u003e\u003ch3\u003eWhy the 125 PSI build\u003c\/h3\u003e\u003cp\u003eThe AS-15 cabinet is sold at three pressures and the airflow moves with it: 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI, and 41.7 CFM at 175 PSI, all from the same 15 HP motor and the same frame. Choosing 125 PSI buys about 25 percent more air than the 175 PSI build, which is the right trade whenever the tool list works at 90 to 100 PSI at the point of use, as most sanders, impact tools, spray guns and plasma torches do. Step up to 150 or 175 PSI only when a specific machine calls for it or a long run of undersized pipe eats the pressure on the way out, because header pressure you do not need is horsepower you pay for every hour the compressor runs.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e is the same compressor and the same tank without the dryer, at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e is the bare base mount machine at 478 lbs for shops that already own a receiver. Moving up in pressure trades airflow: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e gives 41.7 CFM at 175 PSI, both in the identical cabinet. If the tool list calls for more air at the same 125 PSI, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-20253TMD\u003c\/a\u003e steps up to 20 HP and 60.6 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAt 52.1 CFM this is a whole shop machine rather than a bench supply: a body shop running a booth alongside air tools, a cabinet or millwork shop on orbital sanders and nailers, a fabrication shop feeding a plasma table, or a small production line on pneumatic controls and instrument air. Dry air is the thread running through all of them. Paint, powder coat, plasma consumables and air logic fail in the same way when water reaches them, and here they are all fed from a discharge that has already passed through the dryer. The 131 gallon receiver gives the package room to ride out bursts of heavy demand without short cycling, and at 69 dBA it is quiet enough to sit near the point of use instead of in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left to decide is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on both the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Keep an oil, oil filter and separator element set on the shelf and let the controller's programmed maintenance schedule tell you when they are due. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full range of \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed rotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765232915,"sku":"4152043930","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd.png?v=1790967821"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503TMD is the all in one version of ABAC's 15 HP AS-B screw compressor set up for higher pressure: compressor, 131 gallon receiver and air dryer built onto a single frame and shipped as one machine. It delivers 46.4 CFM at a 150 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer is already plumbed and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint it occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15503TMD (part number 4152043931)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy 150 PSI, and what it costs you\u003c\/h3\u003e\u003cp\u003ePressure and airflow trade against each other on the same air end. The 150 PSI build of this machine carries 46.4 CFM where the 125 PSI build carries 52.1 CFM, from identical hardware in an identical cabinet at the same 871 lbs. Buy the pressure only if a tool, a press, a clamp or a test stand genuinely needs it. If nothing on the floor asks for more than 125 PSI, the lower pressure build gives you about 12 percent more air for the same power draw. Where 150 PSI is the requirement, running it here rather than regulating down from a 175 PSI machine keeps the compressor off its least efficient operating point.\u003c\/p\u003e\u003ch3\u003eWhy the dryer belongs on the compressor\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. It also pushes warm, saturated air into the piping, and that water condenses out in the lines rather than in the compressor room. Drying at the source keeps condensate out of the distribution piping altogether instead of leaving traps, filters and drip legs downstream to catch it. In a paint booth, a powder coating line or a plasma table, that is the difference between a clean part and a reject.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e is the same compressor and the same tank without the dryer, at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e is the bare base mount machine at 478 lbs for shops that already own a receiver. Moving on pressure trades airflow: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e gives 52.1 CFM at 125 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e gives 41.7 CFM at 175 PSI, both in the identical cabinet. If the tool list calls for more air at this same 150 PSI, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TMD\u003c\/a\u003e steps up to 20 HP and 54 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, powder coating, plasma cutting, pneumatic controls and instrument air, press and clamp circuits that will not hold at 125 PSI, and any shop where moisture in the line shows up as a defect in the finished part. The 131 gallon receiver gives the machine room to ride out short bursts of heavy demand without short cycling, and at 69 dBA the package is quiet enough to sit near the point of use rather than in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Size the piping for 46.4 CFM at the far end of the run, not at the compressor. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765265683,"sku":"4152043931","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd_d04c97ae-b263-450c-b1e8-4f6e0a315e0f.png?v=1790967824"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15753TMD is the all in one, high pressure build of ABAC's 15 HP AS-B screw compressor: compressor, 131 gallon receiver and refrigerated air dryer assembled onto a single frame and shipped as one machine. It delivers 41.7 CFM at a 175 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer arrives already piped and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint the whole package occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753TMD (part number 4152043932)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eBuilt for continuous duty\u003c\/h3\u003e\u003cp\u003eThe AS-B platform runs a fully integrated aluminum air end block with vertical oil separation, a design ABAC uses to hold down air loss and oil carryover over long run hours. A rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs the way a piston machine does. The digital controller handles pressure setpoints, start and stop behavior and programmed maintenance intervals, so the machine looks after itself through the shift. Air delivery is rated to ISO 1217 Annex C and the sound level to ISO 2151, which means these figures compare directly against any other manufacturer quoting the same standards rather than a best case number.\u003c\/p\u003e\u003ch3\u003eWhy the dryer belongs on the compressor\u003c\/h3\u003e\u003cp\u003eA screw compressor pushes warm, saturated air into the piping, and that water condenses out in the lines rather than in the compressor room. Drying at the source keeps condensate out of the distribution piping altogether instead of leaving traps, filters and drip legs downstream to catch it. In a paint booth, a powder coating line or on a plasma table, that is the difference between a clean part and a reject. It also matters more at 175 PSI than at 125, because air compressed harder carries more moisture to drop out once it expands at the tool.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. This is the highest pressure build, and the trade is air delivery: 41.7 CFM at 175 PSI against 46.4 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e at 150 PSI and 52.1 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e at 125 PSI, all three in the identical cabinet at the same 871 lbs. Specify 175 PSI when a tool or a process genuinely needs the pressure, not as headroom, because every PSI of headroom is CFM you are not getting. If the air downstream is already treated, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e is the same compressor and the same tank without the dryer at 776 lbs. Where a receiver is already installed, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM base mount\u003c\/a\u003e is the bare machine at 478 lbs in a 37 x 28 x 40 in footprint. If the shop regularly asks for more than 41.7 CFM at this pressure, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-20753TMD\u003c\/a\u003e steps up to 20 HP and 48.5 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, powder coating, plasma cutting, pneumatic controls and instrument air, and any shop where moisture in the line shows up as a defect in the finished part. The 175 PSI rating suits shops running higher pressure tooling, long distribution runs where line loss eats into working pressure, and processes specified above 150 PSI at the point of use. The 131 gallon receiver gives the machine room to ride out short bursts of heavy demand without short cycling, and at 69 dBA the package is quiet enough to sit near the point of use rather than in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Part of the ABAC AS-B screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our wider range of \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765298451,"sku":"4152043932","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd_4deb74d0-9357-4e73-b411-da53534b8ad0.png?v=1790967830"},{"product_id":"abac-as-20-20-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-20253TM 20 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 60.6 CFM, 71 dBA","description":"\u003cp\u003eThe ABAC AS-20253TM is the 125 PSI build of the 20 HP machine in the AS-B screw range, delivered on a 131 gallon horizontal receiver as a single assembly. It puts out 60.6 CFM at a 125 PSI maximum and runs at 71 dBA. Tank mount is the configuration to buy when there is no receiver already in the plant: compressor, tank and controls arrive piped and wired together, so installation comes down to setting it on the floor, bringing power to it and connecting the air line. At 813 lbs in a 76 x 27 x 62 in footprint it takes roughly the floor space of a workbench. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-20253TM (part number 4152043924)\u003c\/li\u003e\n\u003cli\u003eMotor: 20 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 60.6 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 71 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 813 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a state of the art design that limits air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath this one is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting all move independently. At 125 PSI this machine is the airflow build of the 20 HP frame. The \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TM\u003c\/a\u003e is the same compressor set for 150 PSI at 54 CFM, and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-20753TM\u003c\/a\u003e goes to 175 PSI and 48.5 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. Stepping down in power, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e gives 52.1 CFM at the same 125 PSI and 69 dBA, which is the machine to compare against when the extra 8.5 CFM here is not yet needed. If you already own a receiver, the same air end comes as the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-20253BM\u003c\/a\u003e base mount at 516 lbs on a 37 x 28 x 40 in footprint. If you want drying built in, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-20253TMD\u003c\/a\u003e is this exact machine with the refrigerated dryer already mounted and piped. Stepping up again, the \u003ca href=\"\/products\/abac-as-25-25-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-25253TMD\u003c\/a\u003e carries 98.9 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and multi bay operations adding a blast cabinet or a finishing booth. At 60.6 CFM it will keep several bays of air ratchets, sanders and continuous blow off fed through a full shift without the line pressure sagging. The tank mount build is the one to buy for a new installation, or for a shop replacing a worn piston compressor outright, because it takes receiver sizing and tank piping out of the job.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 60.6 CFM the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65\u003c\/a\u003e is the minimum size and the \u003ca href=\"\/products\/abac-cool-75-refrigerated-air-dryer-115v\"\u003eCOOL 75\u003c\/a\u003e gives useful headroom; both run on 115V, so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67578757742867,"sku":"4152043924","price":11254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-20253tm.png?v=1791389315"},{"product_id":"abac-as-20-20-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-20503TM 20 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 54 CFM, 71 dBA","description":"\u003cp\u003eThe ABAC AS-20503TM is the 150 PSI, 131 gallon tank mount build of the 20 HP machine in the AS-B screw range. It delivers 54 CFM free air delivery at a 150 PSI maximum and runs at 71 dBA. The 150 PSI setting is the middle of the three builds on this frame, and it is the one to specify when a clamp circuit, a plant header or a long pipe run needs more than the usual 125 PSI but nothing on the floor genuinely calls for 175. Because the air end, the controls and the receiver ship as one assembly, installation comes down to setting it in place, landing power and tying into the air line. At 813 lbs on a 76 x 27 x 62 in footprint it takes roughly the floor space of a workbench. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-20503TM (part number 4152043925)\u003c\/li\u003e\n\u003cli\u003eMotor: 20 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 54 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 71 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 813 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a fully integrated aluminum block and eco-friendly vertical oil separation, paired with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath this one is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting move independently on the same chassis. The \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-20253TM\u003c\/a\u003e is this identical 813 lb package set for 125 PSI, trading pressure for airflow at 60.6 CFM, and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-20753TM\u003c\/a\u003e goes to 175 PSI and 48.5 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. One size down, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e carries 46.4 CFM at the same 150 PSI on the same tank, which is the machine to compare against when the extra 7.6 CFM here is not yet needed. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503BM\u003c\/a\u003e is the bare 516 lb base mount at the same pressure on a 37 x 28 x 40 in footprint. If you want drying built in, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TMD\u003c\/a\u003e is this exact machine with the refrigerated dryer already mounted and piped. And if volume rather than pressure is the constraint, the quieter \u003ca href=\"\/products\/abac-as-20s-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20S503BM\u003c\/a\u003e air end delivers 78 CFM at 67 dBA from the same 20 HP rating.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, pneumatic controls and conveying, and multi bay operations adding a blast cabinet or a finishing booth. At 54 CFM it will keep several bays of air ratchets, sanders and continuous blow off fed through a shift without the line pressure sagging. The tank mount build is the one to buy for a new installation, or for a shop replacing a worn piston compressor outright, because it takes receiver sizing and tank piping out of the job.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 54 CFM the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65\u003c\/a\u003e is the sensible match and the \u003ca href=\"\/products\/abac-cool-75-refrigerated-air-dryer-115v\"\u003eCOOL 75\u003c\/a\u003e gives headroom for growth; both run on 115V, so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67578800865555,"sku":"4152043925","price":11254.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-20503tm.png?v=1791400034"}],"url":"https:\/\/aircompressorstore.com\/collections\/abac-rotary-screw-air-compressors.oembed?page=2","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}