{"title":"ABAC Hybrid Pro Air Compressors","description":"\u003ch2\u003eABAC Hybrid Pro Air Compressors\u003c\/h2\u003e\n\u003cp\u003eThe Hybrid Pro range is where ABAC puts a lighter pump behind the same 175 PSI two-stage duty. The pump mixes aluminium and cast iron rather than running cast iron throughout, which takes weight and cost out of the machine while keeping the two-stage pressure a working shop needs. A 7.5 HP Hybrid Pro on an 80 gallon tank lands a long way under the equivalent Ironman, and for a shop that runs air in bursts rather than all day, that is the sensible trade.\u003c\/p\u003e\n\u003cp\u003eThe simplex machines cover 5 and 7.5 HP on 60 and 80 gallon ASME receivers, vertical or horizontal, with Premium Full Feature builds that add a magnetic starter and an automatic tank drain, and T39 pump options that lift output to 16.6 CFM at 5 HP and 22.2 CFM at 7.5 HP. The duplex pair two pumps and two motors on one 120 gallon horizontal receiver for 10 and 15 HP, so one pump can carry a quiet shift and both come online when demand spikes. The gas drive AB13-30GH puts a 13 HP Honda engine on a 30 gallon horizontal tank for job sites with no power at the wall.\u003c\/p\u003e\n\u003cp\u003eRunning air most of the day, or blasting? The fully cast iron pumps in the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-ironman-air-compressors\"\u003eABAC Ironman range\u003c\/a\u003e shed heat better and tolerate longer duty cycles. See the whole brand in \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-air-compressors\"\u003eABAC air compressors\u003c\/a\u003e, the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e range, or step across to \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-rotary-screw-air-compressors\"\u003eABAC rotary screw air compressors\u003c\/a\u003e for continuous duty. Pair any of these with an \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-cool-refrigerated-air-dryers\"\u003eABAC COOL refrigerated dryer\u003c\/a\u003e to keep water out of the lines.\u003c\/p\u003e","products":[{"product_id":"abac-ab5-2160v4-5-hp-60-gallon-vertical-two-stage-air-compressor","title":"ABAC AB5-2160V4 5 HP Two-Stage Air Compressor - 60 Gallon Vertical, 175 PSI, 14.6 CFM, 230V Single-Phase","description":"\u003cp\u003eThe ABAC AB5-2160V4 brings two-stage performance to a space-saving 60 gallon vertical package. Its belt-driven PAT 49 pump pairs an aluminum block with cast iron cylinders and ABAC's inner cooling technology, which manages operating temperature to reduce overheating risk and hold duty cycle up under steady tool use. On 230V single-phase power it delivers 14.6 CFM at a maximum 175 PSI, the same output as the 80 gallon AB5 V4 builds, in a footprint of 22 by 27 inches.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AB5-2160V4 (part number 8090304521)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 230V \/ 1-phase \/ 60 Hz, 56 frame\u003c\/li\u003e\n\u003cli\u003ePump: PAT 49 two-stage, aluminum with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 14.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 60 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum head and aftercooler for heat dissipation and moisture removal\u003c\/li\u003e\n\u003cli\u003eOversized flywheel for added pump airflow and cooling efficiency\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard, start\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 301 lbs | Dimensions: 22\" x 27\" x 69\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy two-stage, and what 175 PSI buys you\u003c\/h3\u003e\u003cp\u003eA single-stage pump compresses air once and typically tops out around 135 PSI. A two-stage pump compresses it in two steps with cooling in between, and that is how the AB5-2160V4 reaches 175 PSI. The practical difference is usable air rather than headline pressure. Most air tools want roughly 90 PSI at the inlet, so a receiver filled to 175 PSI keeps feeding them far longer before the pump restarts than the same 60 gallons filled to 135 PSI. The second stage also does less work per stroke at a lower discharge temperature, which is why two-stage pumps are the ones specified for shops pulling air most of the day rather than in short bursts. The trade is cost and weight. If the air goes to a blow gun, a tire chuck and the occasional impact wrench, the single-stage \u003ca href=\"\/products\/abac-ab3-2160v1-3-5-hp-60-gallon-vertical-air-compressor\"\u003eAB3-2160V1\u003c\/a\u003e covers the same 60 gallon vertical footprint at 135 PSI for less money.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThis is the small-footprint member of the AB5 V4 family. It runs the same PAT 49 pump and the same 14.6 CFM at 175 PSI as the 80 gallon builds, so the only thing the 60 gallon tank costs you is stored air, which shows up as slightly more frequent pump cycling during back-to-back tool use. Where the floor space is there, the \u003ca href=\"\/products\/abac-ab5-2180v4ns-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4NS\u003c\/a\u003e is the bare 80 gallon build, the \u003ca href=\"\/products\/abac-ab5-2180v4-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4\u003c\/a\u003e adds a 184T frame motor with a factory magnetic starter, and the \u003ca href=\"\/products\/abac-ab5-2180v4ff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180V4FF\u003c\/a\u003e adds an automatic tank drain and a low oil level switch on top of that. For more air rather than more tank, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e steps up to the T39 pump and 16.6 CFM.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC lists this two-stage belt drive range for automotive, agriculture and farm, food and beverage, and general industrial work. On the floor that means air and water spraying, impact wrenching, screwing and fastening, grinding and sanding in auto repair and tire shops, wood and metal workshops, and farm buildings. The vertical 60 gallon receiver is the reason most buyers land here: it puts real two-stage 175 PSI air in a corner where an 80 gallon machine would not fit.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eGive it a dedicated 230V single-phase circuit sized to the motor nameplate, and leave clear space around the flywheel and belt guard so the cooling air the oversized flywheel moves has somewhere to go. Two-stage compressors push warm, wet air into the line, so most shops add a refrigerated dryer rated above the compressor's 14.6 CFM output, such as the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e, then a filter regulator at each drop feeding paint, tires or air tools. Drain the ASME receiver on a schedule, because water standing in the bottom of a vertical tank is what shortens its life. Part of ABAC's two-stage belt drive Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"Default Title","offer_id":54557390569747,"sku":"8090304521","price":1712.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2160v4-60-gallon-two-stage-air-compressor.png?v=1786375514"},{"product_id":"abac-ab5-2180v4ns-5-hp-80-gallon-vertical-two-stage-air-compressor","title":"ABAC AB5-2180V4NS 5 HP Two-Stage Air Compressor - 80 Gallon Vertical, 175 PSI, 14.6 CFM, 230V Single-Phase","description":"\u003cp\u003eThe ABAC AB5-2180V4NS puts a two-stage hybrid pump with steel cylinders on a full 80 gallon vertical tank, giving your shop more stored air and longer tool run times between pump cycles. It delivers 14.6 CFM at a maximum 175 PSI on 230V single-phase power, and it ships without a factory magnetic starter, which is the one thing separating it from the rest of the 80 gallon AB5 range and the reason it lands lower on price.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AB5-2180V4NS (part number 8090304554)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 230V \/ 1-phase \/ 60 Hz\u003c\/li\u003e\n\u003cli\u003ePump: PAT 49 two-stage hybrid design with steel cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 14.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical\u003c\/li\u003e\n\u003cli\u003eFinned pump cylinder and aftercooler to promote cooling\u003c\/li\u003e\n\u003cli\u003eFully enclosed metal belt guard, start\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eConnections: 3\/4 in NPT discharge, 3\/4 in NPT ball service valve, 1\/4 in NPT knurled drain valve\u003c\/li\u003e\n\u003cli\u003eWeight: 393 lbs | Dimensions: 27.1 x 29.3 x 68.2 in\u003c\/li\u003e\n\u003cli\u003eWarranty: 1 year\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the NS build leaves to you\u003c\/h3\u003e\u003cp\u003eNS stands for no starter. The pump, the motor and the tank are the same hardware the rest of the 80 gallon AB5 range runs on, but the magnetic starter is not fitted at the factory, so the machine arrives expecting the starter, the overload protection and the disconnect to be on your wall already. That is a sensible trade for a shop that has the gear, an electrician on call, or a panel laid out for it, and a poor one for a first compressor. A 5 HP single-phase motor pulls a hard inrush every time the pressure switch closes, and with no overload in the circuit that current works on the motor windings and the switch contacts until one of them gives out. Price a correctly sized starter into the job before the pallet arrives rather than after.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe \u003ca href=\"\/products\/abac-ab5-2180v4-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4\u003c\/a\u003e is the same 14.6 CFM machine with the starter fitted at the factory, the safer buy where the compressor cycles dozens of times a day and the motor and pressure switch need protection from repeated inrush current. The \u003ca href=\"\/products\/abac-ab5-2180v4ff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180V4FF\u003c\/a\u003e Full Feature build adds a pressure actuated automatic tank drain and a low oil level switch on top of that. Where floor space matters more than stored air, the \u003ca href=\"\/products\/abac-ab5-2160v4-5-hp-60-gallon-vertical-two-stage-air-compressor\"\u003e60 gallon AB5-2160V4\u003c\/a\u003e delivers the same 14.6 CFM at 301 lbs in a 22.5 x 29.6 x 68.9 in footprint. For more air on the same 80 gallon tank, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e steps up to the T39 pump and 16.6 CFM.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC lists this two-stage belt drive range for automotive, industrial, agriculture and farm, and food and beverage work. In a shop that means impact wrenches, DA sanders, grinders, spray equipment, and fastening in body and repair bays, tire service, production woodworking, and metal fabrication. The 80 gallon receiver is the reason to take this over a 60 gallon machine on the same pump: more banked air means longer tool runs and fewer pump starts across a shift, and back to back tool use stops short cycling the compressor.\u003c\/p\u003e\u003ch3\u003eInstallation and sizing\u003c\/h3\u003e\u003cp\u003eABAC asks for a minimum of 12 inches of clearance on every side of this machine, both so the finned cylinder and the aftercooler can shed heat and so the belt guard, the service valve and the drain stay reachable. Discharge is 3\/4 in NPT, wide enough to feed a shop loop without choking the first run of pipe, with a 3\/4 in NPT ball valve at the service point and a 1\/4 in NPT knurled drain valve at the bottom of the tank. Plan the delivery around the size of it: 393 lbs and 68.2 in tall is a pallet jack or forklift job, and the floor it needs is 27.1 by 29.3 in plus clearance on all four sides. Give the motor its own branch circuit sized to the nameplate and confirm the panel carries a 5 HP 230V single-phase load. Drain the receiver at the end of each shift, because a two-stage pump moving 14.6 CFM puts a surprising amount of condensate into an 80 gallon tank over a working day.\u003c\/p\u003e\u003cp\u003eA two-stage compressor pushes warm, wet air down the line, so most shops pair one with a refrigerated dryer rated above the compressor's 14.6 CFM output, such as the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group, the AB5-2180V4NS is the value path to an 80 gallon 5 HP two-stage compressor on a standard single-phase circuit. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"Default Title","offer_id":54557391356179,"sku":"8090304554","price":2113.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2180v4ns-80-gallon-two-stage-air-compressor.png?v=1786375536"},{"product_id":"abac-ab5-2180v4-5-hp-80-gallon-vertical-two-stage-air-compressor","title":"ABAC AB5-2180V4 5 HP Two-Stage Air Compressor - 80 Gallon Vertical, 175 PSI, 14.6 CFM, 230V with Magnetic Starter","description":"\u003cp\u003eThe ABAC AB5-2180V4 is the 80 gallon vertical AB5 built with motor protection fitted from the factory. A heavy-duty 184T frame motor and a magnetic starter shield the motor and the pressure switch from the over-amping damage that comes of starting hard and often, which matters in a shop where the compressor cycles all day rather than once an hour. The two-stage PAT 49 pump, aluminum with cast iron cylinders, delivers 14.6 CFM at a maximum 175 PSI on 230V single-phase power.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AB5-2180V4 (part number 8090304539)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 230V \/ 1-phase \/ 60 Hz, 184T frame with magnetic starter\u003c\/li\u003e\n\u003cli\u003ePump: PAT 49 two-stage, aluminum with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 14.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum head and aftercooler for heat dissipation and moisture removal\u003c\/li\u003e\n\u003cli\u003eOversized flywheel for added pump airflow and cooling efficiency\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard, start\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the second stage buys you\u003c\/h3\u003e\u003cp\u003eA single-stage pump squeezes the air once and tops out around 135 to 145 PSI. The PAT 49 squeezes it twice. The low pressure cylinder does the first pass, the air sheds heat before it reaches the smaller high pressure cylinder, and the second pass finishes the job at up to 175 PSI. Cooling the air between the two cylinders is what lets the pump reach the higher pressure without running hot, and it is the reason a two-stage machine survives the long duty cycles that cook a single-stage pump. The finned cylinder and the aftercooler drop the discharge temperature again before the air reaches the receiver, so less water vapor travels down the line and more of it falls out at the tank drain. The practical gain is headroom. Air tools are rated at 90 PSI, and a tank sitting at 175 PSI holds far more usable air above that number than one sitting at 135, so the pump starts less often and catches up faster when it does.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe three 80 gallon AB5 V4 builds run the same pump and deliver the same 14.6 CFM at 175 PSI, so the choice is about what comes fitted. The \u003ca href=\"\/products\/abac-ab5-2180v4ns-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4NS\u003c\/a\u003e is the bare build and ships without a magnetic starter, which suits a shop that already has starter and disconnect gear on the wall. This AB5-2180V4 includes the starter. The \u003ca href=\"\/products\/abac-ab5-2180v4ff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180V4FF\u003c\/a\u003e Full Feature build adds a pressure-actuated automatic tank drain and a low oil level switch. Where floor space matters more than stored air, the \u003ca href=\"\/products\/abac-ab5-2160v4-5-hp-60-gallon-vertical-two-stage-air-compressor\"\u003e60 gallon AB5-2160V4\u003c\/a\u003e runs the same pump at 301 lbs in a 22 x 27 x 69 in footprint. For more air on the same 80 gallon tank, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e steps up to the T39 pump and 16.6 CFM.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC lists this two-stage belt drive range for automotive, industrial, agriculture and farm, and food and beverage work. In practice that means body and repair shops running impact wrenches, DA sanders and grinders, production woodworking, metal fabrication, and farm buildings where the compressor is called on through most of the shift. The magnetic starter earns its place anywhere the unit starts and stops dozens of times a day, since it is the repeated inrush current that takes out an unprotected motor and pressure switch first.\u003c\/p\u003e\u003ch3\u003eInstallation and sizing\u003c\/h3\u003e\u003cp\u003eGive the 184T motor its own branch circuit sized to the motor nameplate, and confirm the panel has the capacity for a 5 HP 230V single-phase load before the pallet arrives. ABAC asks for at least 12 inches of clearance on every side of the 80 gallon AB5, both so the pump and aftercooler can shed heat and so the belt guard, the drain and the service valve stay reachable. Discharge on this tank is 3\/4 in NPT, wide enough to feed a shop loop without choking the first run of pipe. Drain the receiver at the end of each shift, or fit an automatic drain, because a two-stage pump moving 14.6 CFM puts a surprising amount of condensate into an 80 gallon tank over a working day.\u003c\/p\u003e\u003cp\u003eA two-stage compressor pushes warm, wet air down the line, so most shops pair one with a refrigerated dryer rated above the compressor's 14.6 CFM output, such as the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e. Part of ABAC's two-stage belt drive lineup from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"Default Title","offer_id":54557392273683,"sku":"8090304539","price":2493.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2180v4-80-gallon-two-stage-air-compressor.png?v=1786375557"},{"product_id":"abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor","title":"ABAC AB5-2180VP 5 HP Two-Stage Air Compressor - 80 Gallon Vertical, 175 PSI, 16.6 CFM T39 Pump with Magnetic Starter","description":"\u003cp\u003eThe ABAC AB5-2180VP is the high output 5 HP machine in ABAC's 2-Stage Hybrid Pro range. Its belt driven T39 two-stage pump moves 16.6 CFM at a maximum 175 PSI, two full CFM more than the standard 5 HP V4 builds on the same 80 gallon vertical ASME tank. That margin is what lets a single operator keep a DA sander or a die grinder fed instead of waiting on the pump to catch up. Every voltage option ships with a heavy-duty 184T frame motor and a factory fitted magnetic starter, which protects the motor and the pressure switch from the over amping damage that comes of starting hard and often.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB5-2180VP (230V single-phase), AB5-2380VP (230V three-phase), AB5-4380VP (460V three-phase)\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 60 Hz, 184T frame with magnetic starter\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum with cast iron cylinders and inner cooling technology\u003c\/li\u003e\n\u003cli\u003eAir delivery: 16.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercoolers for heat dissipation and moisture removal\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard, start\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 398 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 34 x 75 in\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 80 gallon vertical 5 HP range the pump is what separates the builds. The \u003ca href=\"\/products\/abac-ab5-2180v4-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4\u003c\/a\u003e and the starter-less \u003ca href=\"\/products\/abac-ab5-2180v4ns-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4NS\u003c\/a\u003e run the PAT 49 pump for 14.6 CFM at 393 lbs. This VP build steps up to the T39 pump and 16.6 CFM at 398 lbs, so the extra output costs almost nothing in footprint. The \u003ca href=\"\/products\/abac-ab5-2180vpff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180VPFF\u003c\/a\u003e Full Feature build is the same machine with a pressure actuated automatic tank drain and a low oil level switch added. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-ab5-2180vqp-5-hp-quiet-power-80-gallon-air-compressor\"\u003eAB5-2180VQP\u003c\/a\u003e Quiet Power delivers the same 16.6 CFM at 66 dBA, though it carries 527 lbs in a 39 x 24 x 80 in cabinet. Where floor space matters more than stored air, the \u003ca href=\"\/products\/abac-ab5-2160v4-5-hp-60-gallon-vertical-two-stage-air-compressor\"\u003e60 gallon AB5-2160V4\u003c\/a\u003e runs 14.6 CFM at 301 lbs. For more air on the identical 80 gallon platform, the 7.5 HP \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V\u003c\/a\u003e delivers 22.2 CFM.\u003c\/p\u003e\u003ch3\u003eChoosing a voltage\u003c\/h3\u003e\u003cp\u003eAll three builds deliver the same 16.6 CFM at 175 PSI and weigh the same 398 lbs. Pick 230V single-phase if that is what the panel offers, since it is the only option that runs on common shop power. Where three-phase service exists, the 230V and 460V three-phase builds are the better long term choice: a three-phase motor starts under less stress and runs cooler at the same load. Whichever you pick, run the unit on its own circuit sized to the motor nameplate and have an electrician confirm the service before delivery, because a 5 HP two-stage starting against a full tank draws hard.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC lists the Hybrid Pro range for air and water spraying, impact wrenching, hammering, grinding, fastening, tire inflation and general equipment operation. In practice this is the compressor for an auto body or repair shop, a dealership service bay, a production woodworking or metal fabrication shop, or a farm building where the machine is called on through most of the shift. At 16.6 CFM it will hold up a sander or a grinder continuously, or a pair of impact wrenches used intermittently. For sandblasting or two operators on high-draw tools at once, start at 7.5 HP or move to a \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw compressor\u003c\/a\u003e rated for 100 percent duty.\u003c\/p\u003e\u003cp\u003eA two-stage compressor sends warm, wet air down the line, so pair this one with a refrigerated dryer rated above its 16.6 CFM output, such as the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e, plus a filter regulator ahead of any paint or finishing work. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557399351571,"sku":"8090304299","price":3155.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557399384339,"sku":"8090304323","price":2977.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557399417107,"sku":"8090304356","price":2962.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2180vp-80-gallon-two-stage-air-compressor.png?v=1786375814"},{"product_id":"abac-ab5-2180v4ff-5-hp-80-gallon-vertical-premium-air-compressor","title":"ABAC AB5-2180V4FF 5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 14.6 CFM, 230V Single-Phase","description":"\u003cp\u003eThe ABAC AB5-2180V4FF is the Full Feature build of the 80 gallon vertical AB5 platform. The two-stage PAT 49 pump pairs an aluminum head and aftercooler with cast iron cylinders, so heat and moisture are pulled out of the air before it reaches the tank, and the FF specification adds a pressure-actuated automatic tank drain and a low oil level switch. It delivers 14.6 CFM at a maximum 175 PSI on 230V single-phase power.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AB5-2180V4FF (part number 8090304547)\u003c\/li\u003e\n\u003cli\u003eFull Feature additions: pressure-actuated automatic tank drain, low oil level switch\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 230V \/ 1-phase \/ 60 Hz, 184T frame\u003c\/li\u003e\n\u003cli\u003ePump: PAT 49 two-stage, aluminum with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 14.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum head and aftercooler for heat dissipation and moisture removal\u003c\/li\u003e\n\u003cli\u003eOversized flywheel for added pump airflow and cooling efficiency\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the Full Feature spec buys you\u003c\/h3\u003e\u003cp\u003eTwo of the jobs on a compressor's daily checklist are draining condensate out of the tank and confirming the crankcase still has oil in it. Both get skipped in a busy shop, and both are expensive when they are. Water left standing in an 80 gallon receiver rusts it from the inside and carries moisture down the line into air tools and spray work. Running a two-stage pump low on oil ends it. The FF build automates the first with a pressure-actuated drain that blows the tank down on its own, and guards the second with a low oil level switch that stops the machine rather than letting it run dry. That is the whole difference between this unit and the standard AB5-2180V4, and it is the reason to pay for it anywhere nobody is specifically assigned to the compressor.\u003c\/p\u003e\u003ch3\u003eStandard features\u003c\/h3\u003e\u003cp\u003eEvery machine in ABAC's 2-Stage Hybrid Pro range shares the same core build: cast iron cylinders under an aluminum head, an aluminum aftercooler, an ASME coded tank with safety valves, a fully enclosed belt guard that protects the operator and routes cooling air across the pump, and start and stop pressure switch control. ABAC calls the pump hybrid because the aluminum manages heat while the cast iron cylinders take the wear, and the inner cooling design is what holds operating temperature down through a long duty cycle. The units are assembled in the USA and carry a 2 year full warranty.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe three 80 gallon AB5 models all deliver the same 14.6 CFM at 175 PSI, so the decision is about what comes fitted. The \u003ca href=\"\/products\/abac-ab5-2180v4ns-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4NS\u003c\/a\u003e ships without a magnetic starter, the \u003ca href=\"\/products\/abac-ab5-2180v4-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180V4\u003c\/a\u003e includes one, and this FF build is specified with the automatic tank drain and the low oil level switch. Where floor space matters more than stored air, the \u003ca href=\"\/products\/abac-ab5-2160v4-5-hp-60-gallon-vertical-two-stage-air-compressor\"\u003e60 gallon AB5-2160V4\u003c\/a\u003e runs the same pump on a smaller footprint. If the shop needs more air rather than more automation, the \u003ca href=\"\/products\/abac-ab5-2180vpff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180VPFF\u003c\/a\u003e is the same 5 HP in Full Feature trim with the T39 pump for 16.6 CFM, and the \u003ca href=\"\/products\/abac-ab7-ff-7-5-hp-80-gallon-vertical-premium-air-compressor\"\u003e7.5 HP AB7-2180VFF\u003c\/a\u003e steps up to 22.2 CFM on the same 80 gallon vertical tank. Where noise is the constraint instead, the enclosed \u003ca href=\"\/products\/abac-ab5-2180vqp-5-hp-quiet-power-80-gallon-air-compressor\"\u003eAB5-2180VQP Quiet Power\u003c\/a\u003e delivers 16.6 CFM at 66 dBA.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC rates the Hybrid Pro range for air and water spraying, impact wrenching, screwing, hammering, grinding, fastening, orbital sanding, equipment operation and tire inflation. In practice that means body shops, woodworking shops, farm and agricultural buildings, and general maintenance bays where the compressor is called on through most of the shift rather than in short bursts. At 14.6 CFM it will keep one operator going on sanding or spray work, or feed several intermittent tools across a bay, and the 80 gallon receiver carries the surge so the pump is not restarting on every trigger pull. The vertical tank puts that capacity against a wall instead of across the floor, which is usually what decides between this and a horizontal machine.\u003c\/p\u003e\u003cp\u003eTwo-stage compressors push warm, wet air into the line, so most shops add a refrigerated dryer rated above the compressor's 14.6 CFM output, such as the \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"Default Title","offer_id":54557402300691,"sku":"8090304547","price":2746.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2180v4ff-80-gallon-premium-air-compressor.png?v=1786375951"},{"product_id":"abac-ab5-2180vpff-5-hp-80-gallon-vertical-premium-air-compressor","title":"ABAC AB5-2180VPFF 5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 16.6 CFM T39 Pump","description":"\u003cp\u003eThe ABAC AB5 VPFF series pairs the highest-output 5 HP pump in the 2-Stage Hybrid Pro range with ABAC's Full Feature protection package. The belt-driven T39 two-stage pump moves 16.6 CFM at a maximum 175 PSI, a full two CFM above the standard 5 HP build, and the FF specification adds a pressure-actuated automatic tank drain and a low oil level switch so the two maintenance steps most often skipped happen on their own. All three voltage options ride on the same 80 gallon vertical ASME tank: 230V single-phase (AB5-2180VPFF), 230V three-phase (AB5-2380VPFF), or 460V three-phase (AB5-4380VPFF).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB5-2180VPFF \/ AB5-2380VPFF \/ AB5-4380VPFF\u003c\/li\u003e\n\u003cli\u003eFull Feature additions: pressure-actuated automatic tank drain, low oil level switch\u003c\/li\u003e\n\u003cli\u003eMotor: 5 HP, 60 Hz, in 230V single-phase, 230V three-phase or 460V three-phase\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum with cast iron cylinders and inner cooling technology\u003c\/li\u003e\n\u003cli\u003eAir delivery: 16.6 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercoolers for heat dissipation and moisture removal\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eStart\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 398 lbs | Dimensions: 25\" x 34\" x 75\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eTwo decisions separate the 80 gallon 5 HP builds, and the first is the pump. The \u003ca href=\"\/products\/abac-ab5-2180v4ff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB5-2180V4FF\u003c\/a\u003e runs the PAT 49 pump for 14.6 CFM; the VPFF steps up to the T39 for 16.6 CFM on the same tank at the same 175 PSI, which is the margin that keeps a second air tool from pulling the line down. The second decision is the Full Feature package itself. The \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e is the same T39 machine without the automatic drain and the low oil level switch, so it suits a shop where somebody checks the compressor daily, and the VPFF suits one where nobody is assigned to it. Two more 5 HP machines sit on the same 80 gallon vertical tank: the \u003ca href=\"\/products\/abac-ab5-2180vqp-5-hp-quiet-power-80-gallon-air-compressor\"\u003eAB5-2180VQP Quiet Power\u003c\/a\u003e holds the same 16.6 CFM at 66 dBA where noise is the constraint, and the Ironman \u003ca href=\"\/products\/abac-abc5-ff-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003eABC5-2180VFFS\u003c\/a\u003e trades half a CFM for a fully cast iron C1 pump at 16 CFM. If the tool list already outruns 16.6 CFM, the \u003ca href=\"\/products\/abac-ab7-ff-7-5-hp-80-gallon-vertical-premium-air-compressor\"\u003e7.5 HP AB7-2180VFF\u003c\/a\u003e delivers 22.2 CFM on the identical 80 gallon vertical footprint.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eCollision centers, dealership service departments, production fabrication shops and busy maintenance bays: impact wrenching, DA sanding, grinding, fastening, and air and water spraying across a full shift. Two-stage compression with cast iron cylinders is built for that duty cycle, and the 80 gallon vertical receiver absorbs the surges so the pump is not restarting every time a trigger is pulled. Where the panel offers it, one of the three-phase builds is the better long term choice, because a three-phase motor draws less current per leg and runs cooler under a hard duty cycle.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSpecify the voltage and phase that matches your panel before ordering, because the motor is wound for one or the other. The 230V single-phase build draws the highest current of the three and normally wants a dedicated circuit sized to the motor nameplate, while the 230V and 460V three-phase builds suit shops already running three-phase service. Plan for 75 inches of clear height plus room above for the discharge line, and leave enough room around the 25 by 34 inch footprint to reach the drain, the belt guard and the oil sight glass. The Full Feature automatic drain still needs somewhere to send condensate, so pipe it to a floor drain or a collection container rather than letting it pool under the tank. Keep the intake away from paint fumes and sanding dust, and at 398 lbs plan the lift or the pallet jack route before delivery day. Belts, filters and oil are the routine service items on this range, so keep a set on the shelf.\u003c\/p\u003e\u003cp\u003eA two-stage compressor pushes warm, wet air into the line, so most shops pair one with a refrigerated dryer rated above the compressor's output. The \u003ca href=\"\/products\/abac-cool-25-refrigerated-air-dryer-115v\"\u003eABAC COOL 25\u003c\/a\u003e covers 16.6 CFM with headroom to spare. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557403382035,"sku":"8090304315","price":3353.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557403414803,"sku":"8090304349","price":3323.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557403447571,"sku":"8090304364","price":3323.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-2180vpff-80-gallon-premium-air-compressor.png?v=1786375998"},{"product_id":"abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor","title":"ABAC AB7-2180V 7.5 HP Two-Stage Air Compressor - 80 Gallon Vertical, 175 PSI, 22.2 CFM T39 Pump","description":"\u003cp\u003eThe ABAC AB7 vertical series steps the 2-Stage Hybrid Pro platform up to 7.5 HP, pushing 22.2 CFM at a maximum 175 PSI: enough continuous air for multiple technicians running impact tools, sanders and spray guns at once. The belt-driven T39 two-stage pump pairs an aluminum block with cast iron cylinders and inner cooling technology on an 80 gallon vertical ASME tank, so the air reaching the receiver is already cooled rather than carrying the full heat of compression. Choose 230V single-phase (AB7-2180V), 230V three-phase (AB7-2380VS) or 460V three-phase (AB7-4380VS); all three deliver identical airflow and share the same chassis.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-2180V (230V\/1, part 8090304398), AB7-2380VS (230V\/3, part 8090304455), AB7-4380VS (460V\/3, part 8090304489)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum block with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.2 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercoolers, inner cooling technology\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eStart\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 403 lbs | Dimensions: 25\" x 34\" x 75\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eEvery 80 gallon AB7 runs the same T39 pump and the same 22.2 CFM at 175 PSI, so the decision is footprint and fitted equipment, not output. This standard vertical build is the baseline. The \u003ca href=\"\/products\/abac-ab7-ff-7-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB7-2180VFF Full Feature vertical\u003c\/a\u003e adds a pressure-actuated automatic tank drain and a low oil level switch, which is worth the step up in a shop where nobody is assigned to the compressor. The \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-horizontal-two-stage-air-compressor\"\u003eAB7-2180HS horizontal\u003c\/a\u003e puts the same machine on a 25 x 71 x 48 in footprint for shops without 75 inches of ceiling, and the \u003ca href=\"\/products\/abac-ab7-hff-7-5-hp-80-gallon-horizontal-premium-air-compressor\"\u003eAB7-2180HFF\u003c\/a\u003e is that horizontal in Full Feature trim. If 22.2 CFM is more than the shop draws, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003e5 HP AB5-2180VP\u003c\/a\u003e delivers 16.6 CFM on the same 80 gallon vertical tank. If you want a fully cast iron pump instead of the aluminum and cast iron hybrid, the \u003ca href=\"\/products\/abac-abc7-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003eIronman ABC7-2180V\u003c\/a\u003e gives 21 CFM from a C1 cast iron pump, and where noise is the constraint the \u003ca href=\"\/products\/abac-ab7-2180vqp-7-5-hp-quiet-power-80-gallon-air-compressor\"\u003eAB7-2180VQP Quiet Power\u003c\/a\u003e holds 22.3 CFM at 69 dBA.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eMulti-bay auto repair and body shops, tire stores, welding and fabrication bays, woodworking shops and farm buildings: impact wrenching, grinding, orbital sanding, fastening, and air or water spraying where tools run through most of the shift. A two-stage pump recovers faster than a single-stage machine of the same horsepower, so two or three technicians can stay on tools without waiting on pressure. The 80 gallon receiver keeps the pump from short cycling between tool triggers, and the vertical tank holds that full reserve on a 25 by 34 inch floor footprint.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSpecify the voltage and phase that matches your panel before ordering. The 230V single-phase version draws the highest current of the three and normally wants a dedicated circuit sized to the motor nameplate; the 230V and 460V three-phase versions suit shops already running three-phase service. Plan for 75 inches of clear height plus room above for the discharge line, leave service clearance at the drain and the belt guard, and keep the intake away from paint fumes and sanding dust. Belts, filters and oil are the routine service items on this range, so keep a set on the shelf.\u003c\/p\u003e\u003cp\u003eA two-stage pump still pushes warm, wet air into the line, so size a refrigerated dryer above the 22.2 CFM output, such as the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e, before the air reaches paint, tires or pneumatic controls. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557404201235,"sku":"8090304398","price":3612.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557404234003,"sku":"8090304455","price":3612.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557404266771,"sku":"8090304489","price":3612.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-vertical-80-gallon-two-stage-air-compressor.png?v=1786376025"},{"product_id":"abac-ab7-7-5-hp-80-gallon-horizontal-two-stage-air-compressor","title":"ABAC AB7-2180HS 7.5 HP Two-Stage Air Compressor - 80 Gallon Horizontal, 175 PSI, 22.2 CFM T39 Pump","description":"\u003cp\u003eThe ABAC AB7 horizontal series delivers the same 7.5 HP, 22.2 CFM two-stage performance as the AB7 vertical models, on a low-profile 80 gallon horizontal ASME tank that fits under benches, shelving, and low ceilings where a 75-inch vertical unit will not. The belt-driven T39 two-stage pump combines an aluminum block with cast iron cylinders and inner cooling technology for cool, continuous operation at a maximum 175 PSI. Choose 230V single-phase (AB7-2180HS), 230V three-phase (AB7-2380HS), or 460V three-phase (AB7-4380HS).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-2180HS (230V\/1, part 8090304372), AB7-2380HS (230V\/3, part 8090304422), AB7-4380HS (460V\/3, part 8090303689)\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum block with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.2 CFM at max pressure (ABAC publishes 22.23 CFM for all three voltage and phase versions)\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercooler, inner cooling technology\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eStart\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 413 lbs | Dimensions: 25\" x 71\" x 48\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the Hybrid Pro build buys you\u003c\/h3\u003e\u003cp\u003eABAC calls this range Hybrid because the pump is not all one metal. The cylinders are cast iron, which is the part that takes the heat and the wear on a two-stage machine, while the head and the aftercooler are aluminum, which sheds that heat faster than cast iron can. ABAC pairs the two with what it calls inner cooling technology, routing interstage air through the cooler before the second stage sees it. The practical result is lower discharge temperature, less moisture carried into the tank, and a pump that runs smoother and quieter than an all cast iron equivalent at the same horsepower. The fully enclosed belt guard is doing double duty as well: it is a guard, and it channels cooling air across the pump.\u003c\/p\u003e\u003cp\u003eBecause the three voltage versions share one pump and one motor rating, there is no airflow penalty for picking the phase that matches your panel. All three are rated at 22.23 CFM at 175 PSI.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 2-Stage Hybrid Pro range the pump and motor are identical across tank formats, so the choice comes down to footprint and features. The \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V vertical\u003c\/a\u003e puts the same 22.2 CFM on a 25 x 34 x 75 in footprint at 403 lbs, which saves floor space but needs ceiling height. The \u003ca href=\"\/products\/abac-ab7-hff-7-5-hp-80-gallon-horizontal-premium-air-compressor\"\u003eAB7-2180HFF Full Feature horizontal\u003c\/a\u003e adds a pressure-actuated automatic tank drain and a low oil level switch on the same chassis. If you want a full cast iron pump rather than the aluminum and cast iron hybrid, the \u003ca href=\"\/products\/abac-abc7-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003eIronman ABC7-2180V\u003c\/a\u003e delivers 21 CFM from a C1 cast iron pump. Stepping down, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003e5 HP AB5-2180VP\u003c\/a\u003e gives 16.6 CFM on the same 80 gallon receiver, which is the right call for a one or two technician shop that does not run sanders continuously.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eShops with height restrictions or mezzanines, mobile service buildings, and installations where the compressor tucks under a workbench or against a knee wall. ABAC rates the Hybrid Pro range for tire inflation, hammering, air and water spraying, grinding, fastening, and general equipment operation, and lists the series for automotive, agriculture and farm, food and beverage, and light industrial work. In practice a single AB7 supports several technicians on impacts, sanders, and spray guns without the recovery lag of a smaller single-stage machine. The 80 gallon receiver keeps the pump from short cycling between tool triggers.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSpecify the voltage and phase that matches your panel before ordering: the 230V single-phase version draws the highest current of the three and usually wants a dedicated circuit, while the 230V and 460V three-phase versions suit shops already running three-phase service. In the horizontal format the discharge and tank drain sit low, so leave service clearance on the drain side, and leave room at the belt guard end for cooling air and for belt and pump service. Drain the receiver on a schedule or the moisture that a 175 PSI machine condenses will sit in the bottom of the tank; the \u003ca href=\"\/products\/abac-ab7-hff-7-5-hp-80-gallon-horizontal-premium-air-compressor\"\u003eFull Feature version\u003c\/a\u003e automates that if nobody on the floor will remember. Moisture carries over on any 175 PSI reciprocating compressor running hard, so pair the AB7 with an \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL refrigerated air dryer\u003c\/a\u003e sized against your actual duty cycle if you are spraying finishes or feeding pneumatic controls.\u003c\/p\u003e\u003cp\u003ePart of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/air-compressors\"\u003eair compressors\u003c\/a\u003e and the matching \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557406134547,"sku":"8090304372","price":3612.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557406167315,"sku":"8090304422","price":3612.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557406200083,"sku":"8090303689","price":3612.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-2180hs-80-gallon-horizontal.jpg?v=1791392752"},{"product_id":"abac-ab7-ff-7-5-hp-80-gallon-vertical-premium-air-compressor","title":"ABAC AB7-2180VFF 7.5 HP Two-Stage Air Compressor - 80 Gallon Vertical Premium, 175 PSI, 22.2 CFM T39 Pump","description":"\u003cp\u003eThe ABAC AB7-2180VFF is the Full Feature build of the 80 gallon vertical AB7 platform. The T39 two-stage hybrid pump pairs an aluminum head and aftercooler with cast iron cylinders, so heat and moisture come out of the air before it reaches the tank, and the FF specification adds a pressure-actuated automatic tank drain and a low oil level switch. It delivers 22.2 CFM at a maximum 175 PSI, and the same build is offered on 230V single-phase, 230V three-phase or 460V three-phase power.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-2180VFF (230V 1-phase, Warthog 8090304414, ABAC 2021119423), AB7-2380VFF (230V 3-phase, Warthog 8090304463, ABAC 2021119425), AB7-4380VFF (460V 3-phase, Warthog 8090304497, ABAC 2021119427)\u003c\/li\u003e\n\u003cli\u003eFull Feature additions: pressure-actuated automatic tank drain, low oil level switch\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum head and aftercooler with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.2 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eInner cooling technology, fully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eControl: start\/stop pressure switch\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 34 x 75 in\u003c\/li\u003e\n\u003cli\u003eWeight: 413 lbs on the 230V single-phase build, 403 lbs on both three-phase builds\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat Full Feature buys you\u003c\/h3\u003e\u003cp\u003eTwo jobs keep a piston compressor alive: draining the condensate out of the receiver and keeping oil in the crankcase. Both are daily checks, and in a shop where the compressor belongs to nobody in particular, both get skipped. The pressure-actuated automatic drain bleeds the tank on its own, so water does not sit against the steel between services and rust the receiver from the inside. The low oil level switch watches the one failure that destroys a pump in minutes rather than months. If the compressor lives in a back corner and the person who used to check it has moved on, the FF specification is the version to buy. If somebody opens the drain every morning without being asked, the standard AB7-2180V saves the difference.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eEvery 80 gallon AB7 delivers the same 22.2 CFM at 175 PSI, so the choice comes down to footprint and what is fitted. The \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V\u003c\/a\u003e is the standard vertical build without the automatic drain and the oil level switch. The \u003ca href=\"\/products\/abac-ab7-hff-7-5-hp-80-gallon-horizontal-premium-air-compressor\"\u003eAB7-2180HFF\u003c\/a\u003e is this same Full Feature specification on a horizontal tank for shops without 75 inches of ceiling, and the \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-horizontal-two-stage-air-compressor\"\u003eAB7-2180HS\u003c\/a\u003e is the standard horizontal. Where 22.2 CFM is more than the shop draws, the \u003ca href=\"\/products\/abac-ab5-2180vpff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003e5 HP AB5-2180VPFF\u003c\/a\u003e runs 16.6 CFM on the same 80 gallon vertical tank in the same Full Feature trim. Two other 7.5 HP machines sit on the same 80 gallon vertical receiver and answer different constraints: the Ironman \u003ca href=\"\/products\/abac-abc7-ff-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003eABC7-2180VFF\u003c\/a\u003e trades a little airflow, 21 CFM, for a fully cast iron C1 pump built for long duty cycles, and the \u003ca href=\"\/products\/abac-ab7-2180vqp-7-5-hp-quiet-power-80-gallon-air-compressor\"\u003eAB7-2180VQP Quiet Power\u003c\/a\u003e holds 22.3 CFM inside a sound enclosure at 69 dBA where the compressor shares space with people.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eBody shops, fabrication and welding bays, woodworking shops, tire and service work, and farm buildings: impact wrenching, grinding, orbital sanding, fastening, and air or water spraying where tools run through most of the shift. A two-stage pump recovers faster than a single-stage machine of the same horsepower, so two or three technicians can stay on tools without waiting on pressure. The vertical tank keeps the full 80 gallon reserve on a 25 by 34 inch footprint, which is most of the reason shops choose vertical over horizontal when the ceiling allows it.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSpecify the voltage and phase that matches your panel before ordering, because the three builds are not field convertible. The 230V single-phase version draws the highest current of the three and normally wants a dedicated circuit sized to the motor nameplate; the 230V and 460V three-phase versions suit shops already on three-phase service. Plan for 75 inches of clear height plus room above for the discharge line, leave service clearance at the drain and the belt guard, and keep the intake away from paint fumes and sanding dust. Route the automatic drain discharge to a collection point rather than onto the floor, since what it bleeds is oily condensate. Belts, filters and oil are the routine service items on this range, so keep a set on the shelf.\u003c\/p\u003e\u003cp\u003eA two-stage pump still pushes warm, wet air into the line, so size a refrigerated dryer above the 22.2 CFM output, such as the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e, before the air reaches paint, tires or pneumatic controls. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557406626067,"sku":"8090304414","price":3846.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557406658835,"sku":"8090304463","price":3846.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557406691603,"sku":"8090304497","price":3846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-vertical-ff-80-gallon-premium-air-compressor.png?v=1786376132"},{"product_id":"abac-ab7-hff-7-5-hp-80-gallon-horizontal-premium-air-compressor","title":"ABAC AB7-2180HFF 7.5 HP Two-Stage Air Compressor - 80 Gallon Horizontal Premium, 175 PSI, 22.2 CFM T39 Pump","description":"\u003cp\u003eThe ABAC AB7-2180HFF is the Full Feature build of the 80 gallon horizontal AB7 platform. The belt-driven T39 two-stage pump pairs an aluminum head and aftercooler with cast iron cylinders, so heat comes out of the air before it reaches the receiver, and the FF specification adds a pressure-actuated automatic tank drain and a low oil level switch. It delivers 22.2 CFM at a maximum 175 PSI on a low-profile tank that fits under benches, mezzanines and low ceilings where a 75 inch vertical machine will not. The same build is offered on 230V single-phase, 230V three-phase and 460V three-phase power.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-2180HFF (230V\/1, part 8090304380), AB7-2380HFF (230V\/3, part 8090304430), 460V\/3 horizontal Full Feature (part 8090304471)\u003c\/li\u003e\n\u003cli\u003eFull Feature additions: pressure-actuated automatic tank drain, low oil level switch\u003c\/li\u003e\n\u003cli\u003eMotor: 7.5 HP\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage hybrid, aluminum head and aftercooler with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.2 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 80 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eStart\/stop pressure switch control\u003c\/li\u003e\n\u003cli\u003eWeight: 413 lbs | Dimensions: 25\" x 71\" x 48\"\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eEvery 80 gallon AB7 runs the same T39 pump and the same 22.2 CFM at 175 PSI, so the choice is footprint and fitted equipment rather than output. The \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-horizontal-two-stage-air-compressor\"\u003eAB7-2180HS\u003c\/a\u003e is this same horizontal machine without the automatic drain and the oil level switch. The \u003ca href=\"\/products\/abac-ab7-ff-7-5-hp-80-gallon-vertical-premium-air-compressor\"\u003eAB7-2180VFF\u003c\/a\u003e is the Full Feature specification on a vertical tank, 25 x 34 x 75 in, for shops with ceiling height but tight floor space, and the \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V\u003c\/a\u003e is the standard vertical. Where 22.2 CFM is more than the shop draws, the \u003ca href=\"\/products\/abac-ab5-2180vpff-5-hp-80-gallon-vertical-premium-air-compressor\"\u003e5 HP AB5-2180VPFF\u003c\/a\u003e runs 16.6 CFM in the same Full Feature trim. If a fully cast iron pump suits the duty better than the aluminum and cast iron hybrid, the \u003ca href=\"\/products\/abac-abc7-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003eIronman ABC7-2180V\u003c\/a\u003e delivers 21 CFM from a C1 pump.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eMulti-bay auto repair and body shops, tire stores, welding and fabrication bays, woodworking shops and farm buildings with a height restriction: impact wrenching, grinding, orbital sanding, fastening, and air or water spraying where tools run through most of the shift. A two-stage pump recovers faster than a single-stage machine of the same horsepower, so several technicians can stay on tools without waiting on pressure, and the 80 gallon receiver keeps the pump from short cycling between tool triggers. The automatic drain and the oil level switch cover the two daily checks most often skipped where nobody is assigned to the compressor.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003eSpecify the voltage and phase that matches your panel before ordering. The 230V single-phase version draws the highest current of the three and normally wants a dedicated circuit sized to the motor nameplate, while the 230V and 460V three-phase versions suit shops already running three-phase service. Allow for the 25 by 71 inch floor footprint and 48 inches of height, leave service clearance on the drain side where the discharge and tank drain sit low on a horizontal tank, and keep the intake away from paint fumes and sanding dust. Belts, filters and oil are the routine service items on this range.\u003c\/p\u003e\u003cp\u003eA two-stage pump still pushes warm, wet air into the line, so size a refrigerated dryer above the 22.2 CFM output, such as the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e, before the air reaches paint, tires or pneumatic controls. Part of ABAC's 2-Stage Hybrid Pro range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003ecompressed air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557408362771,"sku":"8090304380","price":3846.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557408395539,"sku":"8090304430","price":3846.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557408428307,"sku":"8090304471","price":3846.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-2180hff-80-gallon-horizontal-premium.jpg?v=1791396350"},{"product_id":"abac-ab5-duplex-10-hp-120-gallon-horizontal-air-compressor","title":"ABAC AB5-21120D 10 HP Two-Stage Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 33.2 CFM","description":"\u003cp\u003eThe ABAC AB5-21120D mounts two independent 5 HP motor and pump assemblies on a single 120 gallon horizontal ASME tank. The controller alternates between pumps to even out wear, or runs both together when demand spikes, delivering a combined 33.2 CFM (16.6 CFM per pump) at a maximum 175 PSI. If one pump ever needs service, the other keeps the shop running: redundancy that a single-pump compressor simply cannot offer.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB5-21120D 230V single-phase (part 8090304224), AB5-23120D 230V three-phase (part 8090304232), AB5-43120D 460V three-phase (part 8090304240)\u003c\/li\u003e\n\u003cli\u003ePower: 10 HP total, two 5 HP motors\u003c\/li\u003e\n\u003cli\u003ePumps: two T39 two-stage hybrid pumps, aluminum with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 33.2 CFM combined, 16.6 CFM per pump at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAlternating or simultaneous pump operation for uptime and peak capacity\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel settings\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercoolers, fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eDual start\/stop pressure switch controls, magnetic starters\u003c\/li\u003e\n\u003cli\u003eWeight: 892 lbs | Dimensions: 25 x 79 x 55 in\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the Hybrid Pro duplex range the only variable is capacity, because the footprint does not change. The \u003ca href=\"\/products\/abac-ab7-duplex-15-hp-120-gallon-horizontal-air-compressor\"\u003eAB7-21120D\u003c\/a\u003e pairs two 7.5 HP pumps for 44.6 CFM on the same 120 gallon horizontal tank and the same 25 x 79 x 55 in floor space, at 910 lbs against this machine's 892. Against a single machine, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e runs one 5 HP T39 pump at 16.6 CFM on an 80 gallon vertical tank, so the duplex doubles that output and adds the fallback a single-pump compressor cannot give you. If the duty cycle calls for full cast iron rather than the hybrid T39, the \u003ca href=\"\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC5-21120HD Ironman duplex\u003c\/a\u003e is also 10 HP on 120 gallons, at 32 CFM with C1 cast iron pumps.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC positions the Hybrid Pro Duplex for work with a high variation in air demand, anywhere from intermittent duty up to 100 percent duty: hammering, spraying, grinding, fastening, orbital sanding and general equipment operation. Those are surge loads rather than steady ones, which is exactly where a duplex earns its price. One pump carries the baseline and the second joins only when the line calls for it, so neither motor spends the day short cycling the way a single large compressor would. Production shops, multi-bay service centers and any floor where an air outage stops the whole operation are the usual homes for this machine. Where the panel offers three-phase, the 230V or 460V three-phase build is the better long term choice, because a three-phase motor draws less current per leg and runs cooler under a hard duty cycle.\u003c\/p\u003e\u003cp\u003eTwo-stage compression sends warm, wet air down the line, so size a refrigerated dryer above the compressor's output rather than to the pipe. The \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e is the smallest dryer in the COOL range that covers 33.2 CFM, and the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eCOOL 50\u003c\/a\u003e leaves room to spare in a warm shop. Part of ABAC's 2-Stage Hybrid Pro Duplex range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557510730003,"sku":"8090304224","price":7041.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557510762771,"sku":"8090304232","price":6838.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557510795539,"sku":"8090304240","price":7136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-duplex-120-gallon-horizontal-air-compressor.png?v=1786378023"},{"product_id":"abac-ab7-duplex-15-hp-120-gallon-horizontal-air-compressor","title":"ABAC AB7-21120D 15 HP Two-Stage Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 44.6 CFM","description":"\u003cp\u003eThe ABAC AB7 Duplex is the largest piston duplex in ABAC's Hybrid Pro range: two independent 7.5 HP motor and pump assemblies on one 120 gallon horizontal ASME tank, producing a combined 44.6 CFM at a maximum 175 PSI. Alternating operation spreads runtime evenly across both pumps, while simultaneous operation covers peak demand that would overwhelm a single-pump machine. The second reason shops choose a duplex is redundancy: if one pump comes out for service, the other keeps the line pressurized instead of shutting the floor down. Choose 230V single-phase (AB7-21120D), 230V three-phase (AB7-23120D), or 460V three-phase (AB7-43120D).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-21120D 230V single-phase (part 8090304257), AB7-23120D 230V three-phase (part 8090304265), AB7-43120D 460V three-phase (part 8090304273)\u003c\/li\u003e\n\u003cli\u003ePower: 15 HP total, two 7.5 HP motors, 60 Hz\u003c\/li\u003e\n\u003cli\u003ePumps: two T39 two-stage pumps, hybrid aluminum and cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.23 CFM per pump, 44.6 CFM combined with both sides running\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAlternating or simultaneous pump operation for uptime and peak capacity\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel with adjustable control parameters\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eWeight: 910 lbs | Dimensions: 25 x 79 x 55 in\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a duplex instead of one bigger compressor\u003c\/h3\u003e\u003cp\u003eA duplex buys two things a single machine cannot. The first is uptime. A failed pump, a belt change or an oil service takes half the capacity offline instead of all of it, so the floor keeps working while the other side carries the load. The second is staging. Under light or intermittent demand the control alternates the two sides and shares the hours between them rather than loading one pump all day; when demand climbs, both sides run together for the full 44.6 CFM. Each pump then runs cooler, rests longer and reaches its service intervals later than one large pump doing the same total work. That is also why the published rating is 22.23 CFM per side: the machine is designed to spend most of its life running on one pump and to call on the second only when the line asks for it.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the Hybrid Pro duplex range the choice is capacity on an identical footprint. The \u003ca href=\"\/products\/abac-ab5-duplex-10-hp-120-gallon-horizontal-air-compressor\"\u003eAB5-21120D\u003c\/a\u003e pairs two 5 HP pumps for 33.2 CFM on the same 120 gallon horizontal tank and the same 25 x 79 x 55 in floor space, so the AB7 buys roughly eleven more CFM without asking for another square foot of shop, at 910 lbs against 892. Against a single machine, the \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V\u003c\/a\u003e runs one 7.5 HP T39 pump at 22.2 CFM; the duplex doubles that and adds the fallback a single-pump compressor cannot give you. If the duty cycle is hard enough to want full cast iron rather than the hybrid T39, the \u003ca href=\"\/products\/abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7-21120HD Ironman duplex\u003c\/a\u003e is also 15 HP on 120 gallons, at 42 CFM with C1 cast iron pumps, and the \u003ca href=\"\/products\/abac-abc7-v2-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7-2112DH2P\u003c\/a\u003e reaches 52 CFM at the same 15 HP with C2 pumps. Decide on duty cycle first and CFM second: the hybrid pump is the right answer for a shop that works in bursts, the cast iron pump for one that runs air most of the day.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eHigh-demand fabrication shops, collision centers running more than one booth, tire and fleet service bays, and industrial plants where sandblasting, plasma cutting, or several pneumatic stations draw at the same time. Those loads are the case for a duplex: demand arrives in surges rather than steadily, so one pump carries the baseline and the second joins only when the line calls for it, which keeps both motors off the short-cycling that shortens a single large compressor's life. ABAC builds the Hybrid Pro range for professional settings, metal and wood workshops and auto body and repair shops among them.\u003c\/p\u003e\u003ch3\u003ePower, installation and air quality\u003c\/h3\u003e\u003cp\u003eTake three-phase power if the panel has it. A three-phase motor draws less current per leg, starts easier and runs cooler on a compressor that cycles all day, and the 460V build keeps the wire size down on a long run from the panel. Each side draws its own load, so size the circuit for both pumps running together even though the control normally alternates them. At 79 inches long the horizontal tank runs along a wall and keeps the overhead clear, but leave room at the belt guards and flywheels for cooling air and service access, and plan the drain, because a 120 gallon receiver collects real water.\u003c\/p\u003e\u003cp\u003eTwo-stage compression still sends warm, wet air down the line, so size a refrigerated dryer above the compressor's output rather than to the pipe. At 50 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the smallest dryer in the COOL range that covers 44.6 CFM with headroom, and it is worth having ahead of a paint booth, a plasma table or any tool line you would rather not run water through. Part of ABAC's 2-Stage Hybrid Pro Duplex range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557511516435,"sku":"8090304257","price":7416.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557511549203,"sku":"8090304265","price":7416.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557511581971,"sku":"8090304273","price":7416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-duplex-120-gallon-horizontal-air-compressor.png?v=1786378024"},{"product_id":"abac-ab13-30gh-13-hp-honda-gas-drive-air-compressor","title":"ABAC AB13-30GH 13 HP Honda Gas Drive Air Compressor - 30 Gallon Horizontal, 175 PSI, 22 CFM","description":"\u003cp\u003eThe ABAC AB13-30GH puts full shop-grade air anywhere a truck can reach. A 13 HP Honda gas engine drives a T39 hybrid pump on a 30 gallon horizontal ASME tank, producing 22 CFM at a maximum 175 PSI with no electrical service required. At 378 lbs it is the lightest machine in ABAC's gas engine range, which is what makes it the one crews actually lift onto a service bed.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AB13-30GH (part number 8090304620)\u003c\/li\u003e\n\u003cli\u003eEngine: 13 HP Honda gas, 12V electric start with recoil backup\u003c\/li\u003e\n\u003cli\u003ePump: T39 two-stage Hybrid Pro, aluminum block with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 30 gallon horizontal, ASME tank and safety valves, EZ pull tank drain\u003c\/li\u003e\n\u003cli\u003eDimensions: 45 x 19 x 45 in\u003c\/li\u003e\n\u003cli\u003eWeight: 378 lbs\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the Hybrid Pro pump brings\u003c\/h3\u003e\u003cp\u003eABAC lists the AB13-30GH on its engine range as the single Two-Stage Hybrid Pro gas model, and the T39 pump is where that name comes from. ABAC builds the Hybrid Pro pump as an aluminum pump carrying cast iron cylinders, with an aluminum head and aftercooler, and describes its inner cooling technology as managing operating temperature to reduce the risk of overheating. The practical effect is a pump that wears like cast iron where it matters while the aluminum castings keep the mass down, and that is the whole argument for this machine: 22 CFM in a 378 lb package, where the fully cast iron Ironman pumps delivering 23 to 32 CFM start at 509 lbs.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThis is the Hybrid Pro gas model, and the trade it makes is weight against pump life. The aluminum and cast iron T39 pump brings the machine in at 378 lbs and 22 CFM. Step across to the fully cast iron Ironman pump and the numbers move together: the \u003ca href=\"\/products\/abac-abc11-30gh-11-hp-honda-gas-drive-air-compressor\"\u003e11 HP Honda ABC11-30GH\u003c\/a\u003e delivers 23 CFM at 509 lbs, the \u003ca href=\"\/products\/abac-abc13-30gh-13-hp-honda-gas-drive-air-compressor\"\u003e13 HP Honda ABC13-30GH\u003c\/a\u003e delivers 25 CFM at 519 lbs, the \u003ca href=\"\/products\/abac-abc14-30gk-14-hp-kohler-gas-drive-air-compressor\"\u003e14 HP Kohler ABC14-30GK\u003c\/a\u003e matches it at 526 lbs, and the \u003ca href=\"\/products\/abac-abc16-30gv-16-hp-vanguard-gas-drive-air-compressor\"\u003e16 HP Vanguard ABC16-30GV\u003c\/a\u003e tops the range at 32 CFM and 605 lbs. All five run 175 PSI on a 30 gallon horizontal tank. If the compressor lives on a truck and gets loaded and unloaded daily, the 130 to 230 lbs this model saves is the deciding number. If it runs hard every day in one place, the cast iron Ironman pump is the one built for it.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC rates its engine range for heavy duty work where mobility is the point and no electrical outlet is available, and rates the Hybrid Pro pump for air and water spraying, impact wrenching and screwing. In practice that means mobile service and tire trucks, construction and framing crews, fence and deck installation, roofing and siding, agricultural and farm work away from the shop, and any remote site where running an air tool matters more than finding an outlet. At 22 CFM it will keep an impact wrench, a framing nailer or a pair of air hammers fed, and the 30 gallon ASME receiver stops the pump short cycling between tool triggers.\u003c\/p\u003e\u003ch3\u003eSiting and running a gas drive\u003c\/h3\u003e\u003cp\u003eRun it outdoors or in an open bay, never in a closed shop or a van with the doors shut, because the engine exhausts carbon monoxide. Keep it level so the engine and pump oil sit where they should, leave the flywheel and belt guard clear air for cooling, and drain the tank at the end of the day. ABAC fits the EZ pull tank drain and the fully enclosed belt guard for exactly this duty cycle, where a machine gets loaded, bounced down a road and started cold again the next morning. The 12V electric start saves the rope pull on those cold mornings and the recoil backup means a flat battery does not end the shift, so check the engine oil at every fuel fill and keep a spare pump oil and air filter element on the truck.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Engine Drive range from the Atlas Copco group. See the rest of the \u003ca href=\"\/collections\/engine-driven\"\u003egas engine compressors\u003c\/a\u003e and our wider range of \u003ca href=\"\/collections\/portable-air-compressors\"\u003eportable air compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"Default Title","offer_id":54557519118611,"sku":"8090304620","price":3746.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab13-30gh-honda-gas-drive-air-compressor.png?v=1786378110"}],"url":"https:\/\/aircompressorstore.com\/collections\/abac-hybrid-pro-air-compressors.oembed","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}