{"title":"ABAC 10 to 15 HP Air Compressors","description":"\u003ch2\u003eABAC 10 to 15 HP Air Compressors\u003c\/h2\u003e\n\u003cp\u003eTen to fifteen horsepower is the band where compressed air stops being a tool supply and becomes a utility. It covers the multi bay collision centre, the CNC shop running a machine and a blow off station at the same time, the production line with cylinders and actuators, and any plant that cannot send people home because the compressor is down. ABAC covers the band from both directions: \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-rotary-screw-air-compressors\"\u003eAS series rotary screws\u003c\/a\u003e for continuous duty, and \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-piston-air-compressors\"\u003etwo-stage piston machines\u003c\/a\u003e for higher pressure and intermittent load.\u003c\/p\u003e\n\u003ch3\u003eWhat the 10 HP machines cover\u003c\/h3\u003e\n\u003cp\u003eOn the rotary side the AS-10 delivers 36.4 CFM at 125 PSI or 34.1 CFM at 150 PSI at 69 dBA, available as a bare base mount or on a 71 or 131 gallon ASME receiver, each with or without an integrated refrigerated dryer. The quieter AS-10S runs 65 dBA and adds a 175 PSI setting, delivering 39.8 CFM at 125 PSI, 35.6 CFM at 150 PSI and 29.9 CFM at 175 PSI. On the piston side the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-ironman-air-compressors\"\u003eIronman ABC10\u003c\/a\u003e runs a fully cast iron C2 pump for 32 CFM at 175 PSI on a 120 gallon horizontal or vertical tank, with Full Feature builds that add a magnetic starter and an automatic tank drain. The 10 HP duplex machines pair two 5 HP pumps on one 120 gallon horizontal receiver.\u003c\/p\u003e\n\u003ch3\u003eWhat the 15 HP machines cover\u003c\/h3\u003e\n\u003cp\u003eThe AS-15 rotary screws deliver 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM at 175 PSI at 69 dBA, as a base mount or on a 131 gallon tank with an optional integrated dryer. The 15 HP duplex pistons pair two 7.5 HP pumps on a 120 gallon horizontal tank for 42 to 52 CFM at 175 PSI depending on whether the machine carries C1 or C2 castings.\u003c\/p\u003e\n\u003ch3\u003eRotary screw, piston or duplex\u003c\/h3\u003e\n\u003cp\u003eThree answers at the same horsepower, and the load profile decides. A rotary screw is rated for 100 percent duty and holds its rated flow all day, which is what a production floor needs. A two-stage piston reaches 175 PSI and costs less to buy, but it banks air in a large tank and rests, so it suits intermittent draw. A duplex gives something neither single machine does: two pumps and two motors on one receiver, so light demand runs one side, peaks bring both on, and a pump can come down for service without stopping the shop. Size on the CFM your tools actually draw at once, add roughly a third for leaks and growth, then choose the configuration on duty cycle rather than on price.\u003c\/p\u003e\n\u003ch3\u003eTreat the air\u003c\/h3\u003e\n\u003cp\u003eA compressor in this band pushes a lot of water into the lines. Tank mount models with an integrated dryer handle it on the skid. For a base mount or piston machine, pair it with an \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-cool-refrigerated-air-dryers\"\u003eABAC COOL refrigerated dryer\u003c\/a\u003e and inline \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/air-filters\"\u003efiltration\u003c\/a\u003e sized to the compressor's actual flow, not to its horsepower. See the rest of the range in \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-air-compressors\"\u003eABAC air compressors\u003c\/a\u003e, or step up to \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/abac-20-to-30-hp-air-compressors\"\u003e20 to 30 HP\u003c\/a\u003e if the load is larger than this band covers.\u003c\/p\u003e","products":[{"product_id":"abac-ab5-duplex-10-hp-120-gallon-horizontal-air-compressor","title":"ABAC AB5-21120D 10 HP Two-Stage Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 33.2 CFM","description":"\u003cp\u003eThe ABAC AB5-21120D mounts two independent 5 HP motor and pump assemblies on a single 120 gallon horizontal ASME tank. The controller alternates between pumps to even out wear, or runs both together when demand spikes, delivering a combined 33.2 CFM (16.6 CFM per pump) at a maximum 175 PSI. If one pump ever needs service, the other keeps the shop running: redundancy that a single-pump compressor simply cannot offer.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB5-21120D 230V single-phase (part 8090304224), AB5-23120D 230V three-phase (part 8090304232), AB5-43120D 460V three-phase (part 8090304240)\u003c\/li\u003e\n\u003cli\u003ePower: 10 HP total, two 5 HP motors\u003c\/li\u003e\n\u003cli\u003ePumps: two T39 two-stage hybrid pumps, aluminum with cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 33.2 CFM combined, 16.6 CFM per pump at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAlternating or simultaneous pump operation for uptime and peak capacity\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel settings\u003c\/li\u003e\n\u003cli\u003eAluminum heads and aftercoolers, fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eDual start\/stop pressure switch controls, magnetic starters\u003c\/li\u003e\n\u003cli\u003eWeight: 892 lbs | Dimensions: 25 x 79 x 55 in\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the Hybrid Pro duplex range the only variable is capacity, because the footprint does not change. The \u003ca href=\"\/products\/abac-ab7-duplex-15-hp-120-gallon-horizontal-air-compressor\"\u003eAB7-21120D\u003c\/a\u003e pairs two 7.5 HP pumps for 44.6 CFM on the same 120 gallon horizontal tank and the same 25 x 79 x 55 in floor space, at 910 lbs against this machine's 892. Against a single machine, the \u003ca href=\"\/products\/abac-ab5-2180vp-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB5-2180VP\u003c\/a\u003e runs one 5 HP T39 pump at 16.6 CFM on an 80 gallon vertical tank, so the duplex doubles that output and adds the fallback a single-pump compressor cannot give you. If the duty cycle calls for full cast iron rather than the hybrid T39, the \u003ca href=\"\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC5-21120HD Ironman duplex\u003c\/a\u003e is also 10 HP on 120 gallons, at 32 CFM with C1 cast iron pumps.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC positions the Hybrid Pro Duplex for work with a high variation in air demand, anywhere from intermittent duty up to 100 percent duty: hammering, spraying, grinding, fastening, orbital sanding and general equipment operation. Those are surge loads rather than steady ones, which is exactly where a duplex earns its price. One pump carries the baseline and the second joins only when the line calls for it, so neither motor spends the day short cycling the way a single large compressor would. Production shops, multi-bay service centers and any floor where an air outage stops the whole operation are the usual homes for this machine. Where the panel offers three-phase, the 230V or 460V three-phase build is the better long term choice, because a three-phase motor draws less current per leg and runs cooler under a hard duty cycle.\u003c\/p\u003e\u003cp\u003eTwo-stage compression sends warm, wet air down the line, so size a refrigerated dryer above the compressor's output rather than to the pipe. The \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e is the smallest dryer in the COOL range that covers 33.2 CFM, and the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eCOOL 50\u003c\/a\u003e leaves room to spare in a warm shop. Part of ABAC's 2-Stage Hybrid Pro Duplex range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557510730003,"sku":"8090304224","price":7041.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557510762771,"sku":"8090304232","price":6838.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557510795539,"sku":"8090304240","price":7136.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab5-duplex-120-gallon-horizontal-air-compressor.png?v=1786378023"},{"product_id":"abac-ab7-duplex-15-hp-120-gallon-horizontal-air-compressor","title":"ABAC AB7-21120D 15 HP Two-Stage Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 44.6 CFM","description":"\u003cp\u003eThe ABAC AB7 Duplex is the largest piston duplex in ABAC's Hybrid Pro range: two independent 7.5 HP motor and pump assemblies on one 120 gallon horizontal ASME tank, producing a combined 44.6 CFM at a maximum 175 PSI. Alternating operation spreads runtime evenly across both pumps, while simultaneous operation covers peak demand that would overwhelm a single-pump machine. The second reason shops choose a duplex is redundancy: if one pump comes out for service, the other keeps the line pressurized instead of shutting the floor down. Choose 230V single-phase (AB7-21120D), 230V three-phase (AB7-23120D), or 460V three-phase (AB7-43120D).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: AB7-21120D 230V single-phase (part 8090304257), AB7-23120D 230V three-phase (part 8090304265), AB7-43120D 460V three-phase (part 8090304273)\u003c\/li\u003e\n\u003cli\u003ePower: 15 HP total, two 7.5 HP motors, 60 Hz\u003c\/li\u003e\n\u003cli\u003ePumps: two T39 two-stage pumps, hybrid aluminum and cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 22.23 CFM per pump, 44.6 CFM combined with both sides running\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003eAlternating or simultaneous pump operation for uptime and peak capacity\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel with adjustable control parameters\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eWeight: 910 lbs | Dimensions: 25 x 79 x 55 in\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a duplex instead of one bigger compressor\u003c\/h3\u003e\u003cp\u003eA duplex buys two things a single machine cannot. The first is uptime. A failed pump, a belt change or an oil service takes half the capacity offline instead of all of it, so the floor keeps working while the other side carries the load. The second is staging. Under light or intermittent demand the control alternates the two sides and shares the hours between them rather than loading one pump all day; when demand climbs, both sides run together for the full 44.6 CFM. Each pump then runs cooler, rests longer and reaches its service intervals later than one large pump doing the same total work. That is also why the published rating is 22.23 CFM per side: the machine is designed to spend most of its life running on one pump and to call on the second only when the line asks for it.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the Hybrid Pro duplex range the choice is capacity on an identical footprint. The \u003ca href=\"\/products\/abac-ab5-duplex-10-hp-120-gallon-horizontal-air-compressor\"\u003eAB5-21120D\u003c\/a\u003e pairs two 5 HP pumps for 33.2 CFM on the same 120 gallon horizontal tank and the same 25 x 79 x 55 in floor space, so the AB7 buys roughly eleven more CFM without asking for another square foot of shop, at 910 lbs against 892. Against a single machine, the \u003ca href=\"\/products\/abac-ab7-7-5-hp-80-gallon-vertical-two-stage-air-compressor\"\u003eAB7-2180V\u003c\/a\u003e runs one 7.5 HP T39 pump at 22.2 CFM; the duplex doubles that and adds the fallback a single-pump compressor cannot give you. If the duty cycle is hard enough to want full cast iron rather than the hybrid T39, the \u003ca href=\"\/products\/abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7-21120HD Ironman duplex\u003c\/a\u003e is also 15 HP on 120 gallons, at 42 CFM with C1 cast iron pumps, and the \u003ca href=\"\/products\/abac-abc7-v2-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7-2112DH2P\u003c\/a\u003e reaches 52 CFM at the same 15 HP with C2 pumps. Decide on duty cycle first and CFM second: the hybrid pump is the right answer for a shop that works in bursts, the cast iron pump for one that runs air most of the day.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eHigh-demand fabrication shops, collision centers running more than one booth, tire and fleet service bays, and industrial plants where sandblasting, plasma cutting, or several pneumatic stations draw at the same time. Those loads are the case for a duplex: demand arrives in surges rather than steadily, so one pump carries the baseline and the second joins only when the line calls for it, which keeps both motors off the short-cycling that shortens a single large compressor's life. ABAC builds the Hybrid Pro range for professional settings, metal and wood workshops and auto body and repair shops among them.\u003c\/p\u003e\u003ch3\u003ePower, installation and air quality\u003c\/h3\u003e\u003cp\u003eTake three-phase power if the panel has it. A three-phase motor draws less current per leg, starts easier and runs cooler on a compressor that cycles all day, and the 460V build keeps the wire size down on a long run from the panel. Each side draws its own load, so size the circuit for both pumps running together even though the control normally alternates them. At 79 inches long the horizontal tank runs along a wall and keeps the overhead clear, but leave room at the belt guards and flywheels for cooling air and service access, and plan the drain, because a 120 gallon receiver collects real water.\u003c\/p\u003e\u003cp\u003eTwo-stage compression still sends warm, wet air down the line, so size a refrigerated dryer above the compressor's output rather than to the pipe. At 50 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the smallest dryer in the COOL range that covers 44.6 CFM with headroom, and it is worth having ahead of a paint booth, a plasma table or any tool line you would rather not run water through. Part of ABAC's 2-Stage Hybrid Pro Duplex range from the Atlas Copco group. Browse the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V Single-Phase","offer_id":54557511516435,"sku":"8090304257","price":7416.0,"currency_code":"USD","in_stock":true},{"title":"230V Three-Phase","offer_id":54557511549203,"sku":"8090304265","price":7416.0,"currency_code":"USD","in_stock":true},{"title":"460V Three-Phase","offer_id":54557511581971,"sku":"8090304273","price":7416.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-ab7-duplex-120-gallon-horizontal-air-compressor.png?v=1786378024"},{"product_id":"abac-abc10-10-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC10-23120H 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Horizontal, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10-23120H is the 10 HP Ironman on a 120 gallon horizontal ASME tank, driving the C2 two-stage cast iron pump to 32 CFM at a maximum 175 PSI. The horizontal layout sits low and long, 74 in from end to end but only 50 in tall, which suits shops that would rather run the compressor along a wall or under a mezzanine than give up vertical footprint. This is a three-phase machine only. Choose 230V three-phase (ABC10-23120H), 460V three-phase (ABC10-43120H), or 575V three-phase (ABC10-53120H).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-23120H \/ ABC10-43120H \/ ABC10-53120H\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, four cylinder V-shape, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60, 460\/3\/60, or 575\/3\/60\u003c\/li\u003e\n\u003cli\u003eDimensions: 27 x 74 x 50 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003eWeight: 728 lbs\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the Ironman pump buys you\u003c\/h3\u003e\u003cp\u003eABAC builds the Ironman range around a four cylinder, V-shaped, fully cast iron pump, and that is the whole reason this machine exists alongside lighter aluminum and hybrid builds. Cast iron cylinders shed heat instead of storing it, so the pump tolerates the long loaded stretches that a production shop imposes, and the V layout spreads four cylinders across two stages for a steadier torque pull on the motor. The practical result is a compressor you can size to the shift rather than to the job: at 32 CFM and 175 PSI it holds line pressure while several tools draw at once, and the 120 gallon receiver absorbs the peaks so the motor starts less often. ABAC backs the Ironman Simplex range with a two year warranty.\u003c\/p\u003e\u003ch3\u003eModels, part numbers and configurations\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eSKU\u003c\/th\u003e\n\u003cth\u003eVoltage\u003c\/th\u003e\n\u003cth\u003eCFM at 175 PSI\u003c\/th\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eABC10-23120H\u003c\/td\u003e\n\u003ctd\u003e8090303952\u003c\/td\u003e\n\u003ctd\u003e230V \/ 3 phase \/ 60 Hz\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003ctd\u003e728 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABC10-43120H\u003c\/td\u003e\n\u003ctd\u003e8090303994\u003c\/td\u003e\n\u003ctd\u003e460V \/ 3 phase \/ 60 Hz\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003ctd\u003e728 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABC10-53120H\u003c\/td\u003e\n\u003ctd\u003e8090304034\u003c\/td\u003e\n\u003ctd\u003e575V \/ 3 phase \/ 60 Hz\u003c\/td\u003e\n\u003ctd\u003e32\u003c\/td\u003e\n\u003ctd\u003e728 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cem\u003eABAC part numbers: 2020041780 (230V) and 2020041784 (460V).\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eSame pump, same 32 CFM, different footprint. The \u003ca href=\"\/products\/abac-abc10-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003eABC10-23120V vertical\u003c\/a\u003e stands 74 in tall on a 30 x 41 in base and weighs 765 lbs, trading floor space for height. This horizontal build runs 74 in long and 50 in tall at 728 lbs, which is the one to pick under a mezzanine or a low ceiling. The \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC10 horizontal Full Feature\u003c\/a\u003e is the same machine with ABAC's protection package already fitted: automatic tank drain, low oil level automatic shut off, and a belt guard aftercooler. Buy the Full Feature if nobody on staff will remember to drain the tank or watch the oil, and buy this one if you already have that discipline and a dryer downstream. A step down, the \u003ca href=\"\/products\/abac-abc7-v2-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2\u003c\/a\u003e delivers 24 CFM on an 80 gallon vertical tank. If 32 CFM is already marginal, the \u003ca href=\"\/products\/abac-abc10-duplex-20-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC10-23120HD duplex\u003c\/a\u003e puts two 10 HP pumps on one 120 gallon horizontal tank for 64 CFM and lets you service one side while the other keeps air on the line.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC rates the Ironman range for equipment operation, grinding, hammering, fastening, orbital sanding, spraying and tire inflation, and points it at auto body and repair shops and at metal and wood workshops. In practice that means production floors, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several air tools or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs.\u003c\/p\u003e\u003ch3\u003eInstallation and air treatment\u003c\/h3\u003e\u003cp\u003ePlan for 10 HP three-phase service and a correctly sized disconnect; there is no single-phase option in this frame size. Leave room at both ends of a 74 in tank for the drain and the service side of the pump, and keep the intake away from paint fog and grinding dust. If the air feeds paint, plasma or pneumatic controls, add a refrigerated dryer rated above the compressor's 32 CFM. The \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is rated 50 CFM and runs on a standard 115V single-phase outlet, so it drops in beside the compressor without new wiring. Drain the receiver daily unless you fit an automatic drain, and keep a spare set of filters and pump oil on the shelf.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the Atlas Copco group. The extra 120 gallons of storage over an 80 gallon build cuts motor starts and holds a steadier line pressure, while the horizontal tank keeps overall height down where ceiling clearance is tight. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and the full range of \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":54637280428307,"sku":"8090303952","price":4512.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54637280461075,"sku":"8090303994","price":4512.0,"currency_code":"USD","in_stock":true},{"title":"575V 3-Phase","offer_id":54637280493843,"sku":"8090304034","price":4735.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-120-gallon-horizontal-ironman-air-compressor.png?v=1789403336"},{"product_id":"abac-abc10-10-hp-120-gallon-vertical-ironman-air-compressor","title":"ABAC ABC10-23120V 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Vertical, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10 vertical is the 10 HP Ironman on a \u003ca href=\"\/collections\/vertical-air-compressor-tanks\"\u003e120 gallon ASME vertical tank\u003c\/a\u003e, driving the C2 two-stage cast iron pump to 32 CFM at a maximum 175 PSI. The vertical layout puts that storage into a 30 by 41 inch floor footprint, which is what most shops want when wall and bay space is already committed and there is ceiling height to spare. This is a three-phase machine only. Choose 230V three-phase (ABC10-23120V), 460V three-phase (ABC10-43120V), or 575V three-phase (ABC10-53120V).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-23120V \/ ABC10-43120V \/ ABC10-53120V\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, four cylinder V-shape, cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60, 460\/3\/60, or 575\/3\/60\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guard\u003c\/li\u003e\n\u003cli\u003eDimensions: 30 x 41 x 74 in (L x W x H)\u003c\/li\u003e\n\u003cli\u003eWeight: 765 lbs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe \u003ca href=\"\/products\/abac-abc10-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003ehorizontal ABC10\u003c\/a\u003e is the same 10 HP motor, the same C2 pump and the same 32 CFM at 175 PSI, laid out at 27 x 74 x 50 in and 728 lbs. Pick the horizontal when ceiling clearance is the constraint and the vertical when floor space is. Below the ABC10, the \u003ca href=\"\/products\/abac-abc7-v2-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2\u003c\/a\u003e delivers 24 CFM on an 80 gallon vertical tank. If you want this same vertical machine with ABAC's protection package already fitted, the \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003eABC10 vertical Full Feature\u003c\/a\u003e adds an automatic tank drain, low oil level automatic shut off and a belt guard aftercooler.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several \u003ca href=\"\/collections\/tools\"\u003eair tools\u003c\/a\u003e or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs. ABAC positions the Ironman Simplex range for wood and metal workshops, auto body and repair shops, agriculture and farm, food and beverage, and general industrial duty.\u003c\/p\u003e\u003ch3\u003eAir treatment for a 32 CFM line\u003c\/h3\u003e\u003cp\u003eA two-stage piston compressor sends hot, saturated air into the receiver, and the 120 gallon tank does part of the work by giving that air time to cool and drop its condensate before it reaches the line. The rest is downstream. Size a dryer at or above the compressor's rated output, which for this machine means 32 CFM or better: the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35 refrigerated dryer\u003c\/a\u003e is rated 35 CFM and is the closest match in the COOL range. Add a filter regulator at each drop. This matters most for plasma cutting, paint and pneumatic instruments, where carried over moisture shows up as torch tip wear, fisheye in the finish, or drifting controls. Browse the full \u003ca href=\"\/collections\/air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range if the shop is running more than one compressor onto a shared header.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the Atlas Copco group. The extra 120 gallons of storage over an 80 gallon build cuts motor starts and holds a steadier line pressure, while the vertical tank keeps the machine out of the way in a tight shop. Note that 10 HP three-phase service and a correctly sized disconnect are required; there is no single-phase option in this frame size. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and the wider \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":54637469794579,"sku":"8090303978","price":5051.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54637469827347,"sku":"8090304018","price":5051.0,"currency_code":"USD","in_stock":true},{"title":"575V 3-Phase","offer_id":54637469860115,"sku":"8090304059","price":5264.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-120-gallon-vertical-ironman-air-compressor.png?v=1789403336"},{"product_id":"abac-abc10-ff-10-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC10-23120HFF 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Horizontal Full Feature, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10-23120HFF puts the 10 HP Ironman on a \u003ca href=\"\/collections\/horizontal-air-compressor-tanks\"\u003e120 gallon horizontal ASME tank\u003c\/a\u003e and adds ABAC's Full Feature protection package, so the machine looks after itself between shifts. The C2 four cylinder V shape cast iron pump delivers 32 CFM at a maximum 175 PSI. The horizontal layout sits low and long at 50 inches tall, which suits shops that would rather run the compressor along a wall or under a mezzanine than give up floor space to a vertical footprint. This is a three-phase machine only. Choose 230V three-phase (ABC10-23120HFF), 460V three-phase (ABC10-43120HFF), or 575V three-phase (ABC10-53120HFF).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-23120HFF \/ ABC10-43120HFF \/ ABC10-53120HFF\u003c\/li\u003e\n\u003cli\u003eFull Feature package: automatic tank drain, low oil level automatic shut off, and belt guard aftercooler\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, four cylinder V shape, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60, 460\/3\/60, or 575\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 728 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 27 x 74 x 50 in\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guard, discharge valve, magnetic starter\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe same 10 HP Ironman and the same 32 CFM at 175 PSI are also sold on a vertical receiver. The \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003e120 gallon vertical Full Feature\u003c\/a\u003e is 765 lbs at 30 x 41 x 74 in and gives back the floor where there is ceiling height to spare, while this horizontal build is 728 lbs at 27 x 74 x 50 in and keeps overall height down where clearance is tight. Airflow is identical, so pick on the space you have. If the Full Feature additions are not needed, the \u003ca href=\"\/products\/abac-abc10-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003estandard ABC10 horizontal\u003c\/a\u003e is the same pump and tank without the automatic drain, low oil shut off or aftercooler. Below this sits the \u003ca href=\"\/products\/abac-abc7-v2-ff-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2FF\u003c\/a\u003e at 24 CFM on an 80 gallon vertical tank, which is the right call when the duty is one or two tools at a time rather than a full bay. Alongside it, the \u003ca href=\"\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC5-21120HD duplex\u003c\/a\u003e reaches the same 32 CFM from two 5 HP pumps on one 120 gallon horizontal tank, which buys alternating control and a second pump to fall back on rather than more air.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several \u003ca href=\"\/collections\/tools\"\u003eair tools\u003c\/a\u003e or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs. The 120 gallon receiver cuts motor starts and holds a steadier line pressure than an 80 gallon build, which matters most on intermittent duty where a smaller tank would short cycle the pump. The Full Feature build suits shops that would rather not rely on someone remembering to drain the tank or check the oil.\u003c\/p\u003e\u003cp\u003eThe belt guard aftercooler drops discharge temperature before the air reaches the tank, so less condensate is carried downstream into tools and filters. On a 32 CFM machine feeding paint, plasma or pneumatic instruments, pair it with a \u003ca href=\"\/collections\/air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e sized at or above 32 CFM and a filter regulator at the drop. Part of ABAC's Ironman cast iron range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":54638092681491,"sku":"8090303960","price":5324.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54638092714259,"sku":"8090304000","price":5324.0,"currency_code":"USD","in_stock":true},{"title":"575V 3-Phase","offer_id":54638092747027,"sku":"8090304042","price":5595.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-120-gallon-horizontal-full-feature-air-compressor.png?v=1788228625"},{"product_id":"abac-abc10-ff-10-hp-120-gallon-vertical-ironman-air-compressor","title":"ABAC ABC10-23120VFF 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Vertical Full Feature, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10-23120VFF puts the 10 HP Ironman on a \u003ca href=\"\/collections\/vertical-air-compressor-tanks\"\u003e120 gallon vertical ASME tank\u003c\/a\u003e and adds ABAC's Full Feature protection package, so the machine looks after itself between shifts. The C2 four cylinder V shape cast iron pump delivers 32 CFM at a maximum 175 PSI. The vertical layout puts that storage into a compact floor footprint, which is what most shops want when wall and bay space is already committed and there is ceiling height to spare. This is a three-phase machine only. Choose 230V three-phase (ABC10-23120VFF), 460V three-phase (ABC10-43120VFF), or 575V three-phase (ABC10-53120VFF).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-23120VFF \/ ABC10-43120VFF \/ ABC10-53120VFF\u003c\/li\u003e\n\u003cli\u003eFull Feature package: automatic tank drain, low oil level automatic shut off, and belt guard aftercooler\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, four cylinder V shape, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at max pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60, 460\/3\/60, or 575\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 765 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 30 x 41 x 74 in\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guard, discharge valve, magnetic starter\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat Full Feature adds\u003c\/h3\u003e\u003cp\u003eFull Feature is ABAC's protection package, and on this build it is three things. The automatic tank drain clears condensate out of the bottom of the 120 gallon receiver without anyone opening a petcock, which is the maintenance step shops skip most often and the one that rusts a tank from the inside out. The low oil level automatic shut off stops the motor before the pump runs dry, so a slow leak or a missed oil check does not cost a crankshaft. The belt guard aftercooler drops discharge temperature before the air reaches the tank, so a large share of the moisture drops out in the receiver instead of travelling downstream into tools, filters and spray equipment. Mechanically this is the same 10 HP motor and the same C2 pump as the standard ABC10 vertical. Full Feature changes what the machine does between shifts, not what it delivers.\u003c\/p\u003e\u003ch3\u003eWhy the cast iron pump matters\u003c\/h3\u003e\u003cp\u003eABAC builds the Ironman pump with fully cast iron construction and a four cylinder V shape arrangement, which is what lifts this 10 HP machine to 32 CFM. Cast iron cylinders carry heat away better than aluminium and tolerate the long loaded runs that a production bay imposes, which is most of the reason a 10 HP Ironman weighs 765 lbs. That weight is the trade: this is a machine to anchor in one place and pipe properly, not one to move around.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eThe same 10 HP Ironman and the same 32 CFM at 175 PSI are also sold on a horizontal receiver. The \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e120 gallon horizontal Full Feature\u003c\/a\u003e is 728 lbs at 27 x 74 x 50 in, so it sits low and long under a mezzanine or along a wall, while this vertical build is 765 lbs at 30 x 41 x 74 in and gives back the floor. Airflow is identical, so pick on the space you have. If the Full Feature additions are not needed, the \u003ca href=\"\/products\/abac-abc10-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003estandard ABC10 vertical\u003c\/a\u003e is the same pump and tank without the automatic drain, low oil shut off or aftercooler. Below this sits the \u003ca href=\"\/products\/abac-abc7-v2-ff-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2FF\u003c\/a\u003e at 24 CFM on an 80 gallon vertical tank, which is the right call when the duty is one or two tools at a time rather than a full bay. Alongside it, the \u003ca href=\"\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC5-21120HD duplex\u003c\/a\u003e reaches the same 32 CFM from two 5 HP pumps on one 120 gallon horizontal tank, which buys alternating control and a second pump to fall back on rather than more air, though only on a horizontal footprint.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several \u003ca href=\"\/collections\/tools\"\u003eair tools\u003c\/a\u003e or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs. The 120 gallon receiver cuts motor starts and holds a steadier line pressure than an 80 gallon build, which matters most on intermittent duty where a smaller tank would short cycle the pump. The Full Feature build suits shops that would rather not rely on someone remembering to drain the tank or check the oil.\u003c\/p\u003e\u003ch3\u003eSizing the air treatment\u003c\/h3\u003e\u003cp\u003eAn aftercooler knocks a good share of the water out of the air, but it does not dry it. On a 32 CFM machine feeding paint, plasma or pneumatic instruments, follow the compressor with a refrigerated dryer rated at or above its output: the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e is rated 35 CFM and runs on a standard 115V outlet, so it covers this machine with margin to spare. Add a filter regulator at each drop and run the take offs off the top of the header so condensate stays in the main. Part of ABAC's Ironman cast iron range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":54638260257043,"sku":"8090303986","price":5649.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54638260289811,"sku":"8090304026","price":5649.0,"currency_code":"USD","in_stock":true},{"title":"575V 3-Phase","offer_id":54638260322579,"sku":"8090304067","price":5649.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-ff-120-gallon-vertical-ironman-air-compressor.png?v=1789403336"},{"product_id":"abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC5-21120HD 10 HP Ironman Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 32 CFM C1 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC5-21120HD is the Ironman duplex built around redundancy: two independent 5 HP motor and pump assemblies on a single 120 gallon horizontal ASME tank. Each side runs a C1 two-stage cast iron pump rated 16 CFM, for 32 CFM combined at a maximum 175 PSI. Because the two assemblies are separate, one can come down for service while the other keeps air on the line, which is the reason most shops step up to a duplex rather than buying one larger simplex machine. Choose 230V single-phase (ABC5-21120HD), 230V three-phase (ABC5-23120HD), or 460V three-phase (ABC5-43120HD).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC5-21120HD \/ ABC5-23120HD \/ ABC5-43120HD\u003c\/li\u003e\n\u003cli\u003ePower: 10 HP total (2 x 5 HP)\u003c\/li\u003e\n\u003cli\u003ePumps: two C1 two-stage pumps, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM combined (16 CFM per pump)\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60, 230\/3\/60, or 460\/3\/60\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eWeight: 1120 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 79 x 52 in (230V single-phase), 25 x 79 x 55 in (three-phase)\u003c\/li\u003e\n\u003cli\u003eAssembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a duplex instead of one bigger compressor\u003c\/h3\u003e\u003cp\u003eA duplex buys two things a single machine cannot. The first is uptime: a failed pump, a belt change, or an oil service takes half the capacity offline instead of all of it, so the floor keeps working. The second is staging. Under light or intermittent demand only one side needs to run, and an alternating control shares the hours between the two pumps rather than loading one of them all day. Each pump then runs cooler, rests longer, and reaches its service intervals later than a single pump doing the same total work. Both sides use the fully cast iron C1 pump of the Ironman range, where the extra mass absorbs heat and damps vibration through long run times, and both are two-stage, so 175 PSI arrives in two compression steps with cooling in between instead of one hot single-stage squeeze.\u003c\/p\u003e\u003ch3\u003eSizing and how it compares\u003c\/h3\u003e\u003cp\u003eSize on CFM, not on horsepower. 32 CFM covers a multi-bay shop running impact wrenches, ratchets, grinders and a spray gun at the same time. If the duty is the same but cast iron is more pump than the work needs, the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-ab5-duplex-10-hp-120-gallon-horizontal-air-compressor\"\u003eAB5-21120D\u003c\/a\u003e is the hybrid T39 pump duplex on the same 120 gallon platform. Stepping up, the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e15 HP ABC7-21120HD\u003c\/a\u003e pairs two 7.5 HP sides for 42 CFM, and the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc10-duplex-20-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e20 HP ABC10-23120HD\u003c\/a\u003e reaches 64 CFM. If redundancy is not the point and 16 CFM is enough, the single-pump \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc5-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e5 HP ABC5-2180V\u003c\/a\u003e does the same work on an 80 gallon vertical tank in a far smaller footprint.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, multi-bay service and tire centers, fabrication and welding bays, body shops, and fleet maintenance operations where several air tools draw at once and a compressor going down stops the whole floor. It also suits a facility with a process that cannot tolerate an air outage, where the second pump is insurance rather than extra capacity. At 79 inches long the horizontal tank runs along a wall and keeps the overhead clear.\u003c\/p\u003e\u003ch3\u003ePower, installation and air quality\u003c\/h3\u003e\u003cp\u003eTake three-phase power if the panel has it, since three-phase motors start easier and run cooler on a compressor that cycles all day, and the 460V build keeps the wire size down on a long run. Each side draws its own load, so size the circuit for both running together even if the control normally alternates them. Leave clearance around the belt guards and the flywheels for cooling air and for service access, and plan the drain: a 120 gallon receiver collects real water. Air leaves any piston compressor hot and saturated, so pair it with a \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e ahead of a paint booth, a plasma table, or any tool line you would rather not run water through.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/5-to-15-hp-piston-air-compressors\"\u003e5 to 15 HP piston air compressors\u003c\/a\u003e and the full \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/piston-air-compressors\"\u003episton air compressor\u003c\/a\u003e range.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54698452451603,"sku":"8090303721","price":7271.0,"currency_code":"USD","in_stock":true},{"title":"230V 3-Phase","offer_id":54698452484371,"sku":"8090303739","price":7271.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54698452517139,"sku":"8090303747","price":7451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc5-duplex-120-gallon-horizontal-ironman-air-compressor.png?v=1789403336"},{"product_id":"abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC7-21120HD 15 HP Ironman Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 42 CFM C1 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC7-21120HD is the Ironman duplex built for shops that cannot afford an air outage: two independent 7.5 HP motor and pump assemblies on a single 120 gallon horizontal ASME tank. Each side runs a C1 two-stage cast iron pump rated 21 CFM, for 42 CFM combined at a maximum 175 PSI. Because the two assemblies are separate, one can come down for service while the other keeps air on the line, which is the reason most shops step up to a duplex rather than buying one larger simplex machine. Choose 230V single-phase (ABC7-21120HD), 230V three-phase (ABC7-23120HD), 460V three-phase (ABC7-43120HD), or 575V three-phase (ABC7-53120HD).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC7-21120HD \/ ABC7-23120HD \/ ABC7-43120HD \/ ABC7-53120HD\u003c\/li\u003e\n\u003cli\u003ePower: 15 HP total (2 x 7.5 HP)\u003c\/li\u003e\n\u003cli\u003ePumps: two C1 two-stage pumps, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 42 CFM combined (21 CFM per pump)\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60, 230\/3\/60, 460\/3\/60, or 575\/3\/60\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eAlternating control, dual control for full output, fully programmable control panel\u003c\/li\u003e\n\u003cli\u003eWeight: 1138 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 25 x 79 x 55 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a duplex instead of one bigger compressor\u003c\/h3\u003e\u003cp\u003eA duplex buys two things a single machine cannot. The first is uptime: a failed pump, a belt change, or an oil service takes half the capacity offline instead of all of it, so the floor keeps working. The second is staging. Under light or intermittent demand the alternating control runs one side at a time and shares the hours between the two pumps rather than loading one of them all day; when demand climbs, dual control brings both sides on for the full 42 CFM. Each pump then runs cooler, rests longer, and reaches its service intervals later than a single pump doing the same total work. Both sides use the fully cast iron C1 pump of the Ironman range, where the extra mass absorbs heat and damps vibration through long run times, and both are two-stage, so 175 PSI arrives in two compression steps with cooling in between instead of one hot single-stage squeeze.\u003c\/p\u003e\u003ch3\u003eSizing and how it compares\u003c\/h3\u003e\u003cp\u003eSize on CFM, not on horsepower. 42 CFM supports a busy multi-bay shop running impact wrenches, ratchets, grinders, a sandblast cabinet and a spray gun without the pressure sagging between bays. If 32 CFM is enough, the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e10 HP ABC5-21120HD\u003c\/a\u003e is the same platform with two 5 HP sides. If the duty is the same but cast iron is more pump than the work needs, the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-ab7-duplex-15-hp-120-gallon-horizontal-air-compressor\"\u003eAB7-21120D\u003c\/a\u003e is the hybrid T39 pump duplex at 15 HP. Within the Ironman range the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc7-v2-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7-2112DH2P\u003c\/a\u003e pairs two C2 pumps for 52 CFM at the same 15 HP, and the \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc10-duplex-20-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e20 HP ABC10-23120HD\u003c\/a\u003e reaches 64 CFM. If redundancy is not the point and 21 CFM is enough, the single-pump \u003ca href=\"https:\/\/aircompressorstore.com\/products\/abac-abc7-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V\u003c\/a\u003e does the same per-side work on an 80 gallon vertical tank in a far smaller footprint.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, multi-bay service and tire centers, fabrication and welding bays, body shops, and fleet maintenance operations where several air tools draw at once and a compressor going down stops the whole floor. It also suits a facility with a process that cannot tolerate an air outage, where the second pump is insurance rather than extra capacity. At 79 inches long the horizontal tank runs along a wall and keeps the overhead clear.\u003c\/p\u003e\u003ch3\u003ePower, installation and air quality\u003c\/h3\u003e\u003cp\u003eTake three-phase power if the panel has it, since three-phase motors start easier and run cooler on a compressor that cycles all day, and the 460V or 575V build keeps the wire size down on a long run. Each side draws its own load, so size the circuit for both running together even if the control normally alternates them. Leave clearance around the belt guards and the flywheels for cooling air and for service access, and plan the drain: a 120 gallon receiver collects real water. Air leaves any piston compressor hot and saturated, so pair it with a \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e ahead of a paint booth, a plasma table, or any tool line you would rather not run water through.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/5-to-15-hp-piston-air-compressors\"\u003e5 to 15 HP piston air compressors\u003c\/a\u003e and the full \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/piston-air-compressors\"\u003episton air compressor\u003c\/a\u003e range.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":54698847207699,"sku":"8090303754","price":7385.0,"currency_code":"USD","in_stock":true},{"title":"230V 3-Phase","offer_id":54698847240467,"sku":"8090303762","price":7385.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":54698847273235,"sku":"8090303770","price":7566.0,"currency_code":"USD","in_stock":true},{"title":"575V 3-Phase","offer_id":54698847306003,"sku":"8090303788","price":7747.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc7-duplex-120-gallon-horizontal-ironman-air-compressor.png?v=1789403336"},{"product_id":"abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253BM 10 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253BM is a 10 HP base mount rotary screw air compressor built for shops that run air continuously rather than in bursts. It delivers 36.4 CFM at a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 419 lbs in a 32 x 24 x 40 in cabinet it holds the same footprint as the 5 and 7.5 HP machines in the range. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10253BM (part number 4152043887)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 419 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor, lower oil consumption\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds a steady line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, and ABAC pairs it with an energy efficient motor and a digital controller that handles programmed maintenance, so the service schedule is on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B 5 to 20 HP range the pressure, the airflow and the mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the same machine set for 150 PSI, which trades airflow for pressure at 34.1 CFM in the identical 419 lb cabinet. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5253BM\u003c\/a\u003e gives 30.5 CFM at the same 125 PSI and 67 dBA for 360 lbs, and stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e reaches 52.1 CFM at 478 lbs in a wider 37 x 28 x 40 in cabinet. If you want more air without more noise, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the same 10 HP at 39.8 CFM and a quieter 65 dBA. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e puts the same air end on a 71 gallon tank at 567 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e adds an integrated dryer at 653 lbs. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer in the same package.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, and any operation where a piston compressor is cycling too hard to keep up. At 36.4 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two bay shop fed through a full shift. At 69 dBA it is quiet enough to leave on the shop floor near the point of use, which saves the piping run a separate compressor room would cost.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size with headroom, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54745965396243,"sku":"4152043887","price":7771.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-base-mount-rotary-screw-air-compressor.png?v=1789773118"},{"product_id":"abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503BM 10 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503BM is the 150 PSI build of the 10 HP base mount machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting is the one to specify when a tool, a clamp circuit or a plant header needs more than the usual 125 PSI, or when a long pipe run eats pressure before the air reaches the point of use. Base mount means the unit ships without a receiver, so it plumbs into an air tank you already own or one sized to the job. At 419 lbs in a 32 x 24 x 40 in cabinet it takes roughly the floor space of a two drawer file cabinet. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503BM (part number 4152043888)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 419 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 32 x 24 x 40 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a state of the art design that limits air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, so it wants a receiver sized to its output and a demand pattern that keeps it loaded.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the same 10 HP machine set for 125 PSI, trading pressure for airflow at 36.4 CFM in the identical 419 lb cabinet. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501BM\u003c\/a\u003e gives 27.1 CFM at the same 150 PSI for 360 lbs on the same 32 x 24 x 40 in footprint; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e carries 46.4 CFM. If noise matters, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the quieter 10 HP build at 65 dBA and 35.6 CFM on the same pressure setting. If you do not already own a receiver, the same air end comes tank mounted on a \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e71 gallon tank\u003c\/a\u003e or a \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003e131 gallon tank\u003c\/a\u003e, and with an integrated dryer on the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e131 gallon build\u003c\/a\u003e. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 34.1 CFM it will keep several air ratchets, a sander or a continuous blow off fed through a shift. The base mount build is also the one to buy when you are replacing the compressor on an existing system and keeping the receiver and piping already in place.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand rather than to the pipe, give the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746126942483,"sku":"4152043888","price":7771.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-base-mount-150-psi-rotary-screw-air-compressor.png?v=1789776638"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TM7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TM7 is the 71 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 36.4 CFM with a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The air end and the receiver arrive as one assembled package, so there is no separate tank to source, set and plumb, and the whole unit lands on a 60 x 23 in footprint. At 567 lbs it is the compact receiver option in the 10 HP family, the one to buy when floor space is tight but you still want stored air. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TM7 (part number 4152043895)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 567 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e is the same package set for 150 PSI, trading airflow down to 34.1 CFM for the extra pressure. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount\u003c\/a\u003e carries the same 36.4 CFM on a larger receiver at 714 lbs. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e is this same 71 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM7\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same 71 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma tables and packaging lines. At 36.4 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The tank mount build is the one to buy for a shop that is starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the sensible match and runs on 115V, so it plugs in beside the compressor without new wiring; step to the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e if the room runs hot or the air feeds finishing work. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746271711507,"sku":"4152043895","price":7604.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor_945e2bc2-4f99-4c70-bb40-0ea71e0d7392.png?v=1789780199"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TM7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TM7 is the 150 PSI, 71 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. The higher pressure setting is the one to specify when a tool, a clamp circuit or a plant header needs more than the usual 125 PSI, or when a long pipe run eats pressure before the air reaches the point of use. The air end and the receiver arrive as one assembled package on a 60 x 23 in footprint, so there is no separate tank to source, set and plumb. At 567 lbs it is the compact receiver option in the 10 HP family, the one to buy when floor space is tight but you still want stored air. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TM7 (part number 4152043896)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 567 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 23 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e is the identical 567 lb package set for 125 PSI, trading the extra pressure for more airflow at 36.4 CFM. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e carries the same 34.1 CFM on a larger receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is this same 71 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM7\u003c\/a\u003e gives 27.1 CFM at 67 dBA on the same 71 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e carries 46.4 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 35.6 CFM on the same 150 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 34.1 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The tank mount build is the one to buy for a shop starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746489651475,"sku":"4152043896","price":7604.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as75-71gal-tank-mount-150-psi-rotary-screw-air-compressor_61607108-6bc3-43fb-9457-5950c94c3241.png?v=1790869039"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TM is the 125 PSI, 131 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 36.4 CFM at a 125 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the highest airflow setting offered on the 10 HP air end, so it is the one to specify when the shop is short of air rather than short of pressure. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 714 lbs it is the large receiver option in the 10 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TM (part number 4152043897)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 714 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e is the identical 714 lb package set for 150 PSI, trading 2.3 CFM of airflow for the extra pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e carries the same 36.4 CFM on a 71 gallon receiver at 567 lbs and a 60 x 23 in footprint. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure and airflow. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM\u003c\/a\u003e gives 30.5 CFM at 67 dBA on a 131 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM on the same 125 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. At 36.4 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores roughly twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst. The tank mount build is the one to buy for a shop starting its compressed air system from nothing, because the receiver, the mounts and the interconnecting pipe are already done and the installer only has to land power and tie into the header.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 36.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54746897580307,"sku":"4152043897","price":8114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_efe6b76b-285d-400b-941d-d458b7c46df1.png?v=1790946147"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TM is the 150 PSI, 131 gallon tank mount build of the 10 HP machine in the AS-B screw range. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the pressure setting to specify when a tool or a piece of production equipment is rated above a standard 125 PSI line, and it trades 2.3 CFM against the 125 PSI build to get there. The air end and the receiver arrive as one assembled package on a 76 x 24 in footprint, so there is no separate tank to source, set and plumb. At 714 lbs it is the large receiver option in the 10 HP family, the one to buy when demand is intermittent and you want the compressor to run longer and rest longer rather than load and unload all day. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TM (part number 4152043898)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 714 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for optimizing operating performance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end limits air loss by design, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and mounting all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e is the identical 714 lb package set for 125 PSI, giving 36.4 CFM if your tools do not actually need the extra pressure. If floor space is the constraint, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e carries the same 34.1 CFM on a 71 gallon receiver at 567 lbs. The \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e is this same 131 gallon build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure and airflow. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-7.5501TM\u003c\/a\u003e gives 27.1 CFM at 67 dBA on a 131 gallon tank; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e carries 46.4 CFM. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 35.6 CFM on the same 150 PSI setting. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation where a piston compressor is cycling too hard to keep up. The 150 PSI setting matters where a press, a clamping fixture, a truck tire bead seater or an older air tool wants more than a 125 PSI header will give after line losses. At 34.1 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The 131 gallon receiver stores roughly twice the air of the 71 gallon build, which matters when several bays hit the header at once or when a single large tool draws a short, heavy burst.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 34.1 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e gives useful headroom and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eCOOL 35\u003c\/a\u003e is the minimum size. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54747174109459,"sku":"4152043898","price":8114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_84af8bc2-02a7-4330-8a4e-5089c5c3edce.png?v=1790946149"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TMD7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TMD7 is the 125 PSI, 71 gallon build of the 10 HP machine in the AS-B screw range, and it arrives as a complete air station: compressor, receiver and refrigerated dryer mounted and plumbed as one unit. It delivers 36.4 CFM and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. At 653 lbs on a 60 x 27 in footprint it is the compact receiver option in the 10 HP family, the one to specify when floor space is tight but the air still has to be dry. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TMD7 (part number 4152043905)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 653 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 27 x 57 in\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is why shops running air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is designed to limit air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so operating menus and service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 71 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eWhy the dryer is integrated\u003c\/h3\u003e\n\u003cp\u003eAir leaving any compressor is warm and saturated, and it drops that water out in the pipe run where it reaches tools, cylinders and finishes. Buying the dryer already mounted and plumbed removes a separate purchase, a separate footprint and the fittings between the two. It also means the dryer is correctly sized to this machine's 36.4 CFM from the start, which is the step most often got wrong when a dryer is added later. If you prefer to keep the dryer separate, pair the plain tank mount with a standalone unit from our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow, receiver size and dryer all move independently. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM7\u003c\/a\u003e is the same 71 gallon package without the dryer, 86 lbs lighter at 567 lbs and 4 in narrower. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is this identical 653 lb machine set for 150 PSI, trading airflow down to 34.1 CFM for the extra pressure. If demand is intermittent and you want the pump to rest longer between loads, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e carries the same 36.4 CFM and dryer on a larger receiver. If you already own a tank and a dryer, the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare 419 lb base mount at the same pressure. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD7\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same 71 gallon tank. If noise is the deciding factor, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is the quieter 10 HP air end at 65 dBA and 39.8 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, plasma and laser tables, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. Allow clearance on the cooling air side, keep the room between roughly 40 and 104 F, and run the machine on its own circuit sized to the motor nameplate.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at 109 PSI for 125 PSI maximum units. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the full \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressor\u003c\/a\u003e lineup.\u003c\/p\u003e\n","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54747589345555,"sku":"4152043905","price":8704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-125-psi-rotary-screw-air-compressor.png?v=1789794353"},{"product_id":"abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TMD7 10 HP Rotary Screw Air Compressor - 71 Gallon Tank Mount with Dryer, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TMD7 is a complete compressed air station in one package. It delivers 34.1 CFM at 150 PSI and runs at 69 dBA, quiet enough to sit in the work area instead of a separate compressor room. Compressor, 71 gallon air receiver and refrigerated dryer arrive mounted and plumbed as a single factory assembly, so there is no separate tank or dryer to source, site and pipe. Installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TMD7 (part number 4152043906)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 71 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 653 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 60 x 27 x 57 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eRated for 100 percent continuous duty\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 71 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the AS-B tank mount with dryer builds the choice is flow against line pressure, then storage. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003e125 PSI version of this same package\u003c\/a\u003e gives 36.4 CFM on an identical 653 lb, 60 x 27 x 57 in footprint, so if your tools run happily at 125 PSI you gain about 2 CFM for nothing. Step down a size and the \u003ca href=\"\/products\/abac-as-7-5-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e7.5 HP 150 PSI build\u003c\/a\u003e delivers 27.1 CFM at 67 dBA. Step up in storage and the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003e131 gallon version\u003c\/a\u003e carries the same 10 HP air end on a larger receiver at 800 lbs and a 76 x 24 x 63 in footprint, which suits shops that draw in heavy bursts. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e uses the 10S air end for 35.6 CFM at 65 dBA, and if 34.1 CFM is short of what the shop actually draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds 150 PSI at 46.4 CFM. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM7\u003c\/a\u003e is this same 71 gallon build without the dryer, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003ebase mount AS-10503BM\u003c\/a\u003e is the compressor on its own for a plant that already owns a receiver.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI rating suits shops running tools or equipment rated above the common 125 PSI setting, where a press, a clamping fixture or a truck tire bead seater wants more than a 125 PSI header will give after line losses. At 60 x 27 x 57 in the whole station fits against a wall rather than needing a dedicated room, and at 653 lbs it is the lighter of the two 10 HP dryer packages to rig into place.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. Because the 71 gallon receiver is on the smaller side for 34.1 CFM, a shop with heavy intermittent draws such as impact tools, blow off stations or cabinet blasting should either add a secondary receiver downstream or specify the 131 gallon build instead.\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54748071919891,"sku":"4152043906","price":8704.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-150-psi-rotary-screw-air-compressor.png?v=1789797956"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10253TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 36.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10253TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 36.4 CFM at 125 PSI and runs at 69 dBA. Nothing has to be sourced, sited and piped separately, so installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10253TMD (part number 4152043907)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 36.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 800 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the 10 HP AS machines, pressure and airflow trade directly against each other on the same hardware. This is the 125 PSI build, which is the airflow end of that trade at 36.4 CFM; the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e is the identical package set for 150 PSI at 34.1 CFM. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 714 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e is the bare base mount at 419 lbs on a 32 x 24 in footprint for a plant that already owns a receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD7\u003c\/a\u003e is the same compressor and dryer on a 71 gallon receiver at 653 lbs, which fits a tighter floor plan but stores roughly 60 gallons less air, so heavy intermittent draws hit the air end harder. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e uses the 10S air end for 39.8 CFM at 65 dBA, and if 36.4 CFM is short of what the tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e holds 125 PSI at 52.1 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 125 PSI this is the build to specify when the shop wants volume rather than pressure: more air for sanders, blow-off stations and multiple bays running at once, on a receiver large enough that a sudden heavy draw does not pull the header down.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; CFM quoted at 109 PSI for 125 PSI maximum units. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":54748644213011,"sku":"4152043907","price":9153.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-71gal-tank-mount-dryer-125-psi-rotary-screw-air-compressor_664a24e6-d2d7-4490-a34c-dc291b72bf6f.png?v=1790372127"},{"product_id":"abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10503TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 34.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-10503TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 34.1 CFM at a 150 PSI maximum and runs at 69 dBA. This is the pressure setting to specify when a tool or a piece of production equipment is rated above a standard 125 PSI line, and it trades 2.3 CFM against the 125 PSI build to get there. Nothing has to be sourced, sited and piped separately, so installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10503TMD (part number 4152043908)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 34.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 800 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 24 x 63 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003eVertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eWithin the 10 HP AS machines, pressure and airflow trade directly against each other on the same hardware. This is the 150 PSI build; the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e is the identical 800 lb package set for 125 PSI at 36.4 CFM, which is the one to buy if the tool list does not actually need the extra pressure. If the shop already has drying handled, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 714 lbs, and the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e is the bare base mount at 419 lbs on a 32 x 24 in footprint for a plant that already owns a receiver. The \u003ca href=\"\/products\/abac-as-10-10-hp-71-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD7\u003c\/a\u003e is the same compressor and dryer on a 71 gallon receiver at 653 lbs, which fits a tighter floor plan but stores roughly 60 gallons less air, so heavy intermittent draws hit the air end harder. For a quieter machine with more air on the same 10 HP, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e uses the 10S air end for 35.6 CFM at 65 dBA, and if 34.1 CFM is short of what the shop draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds 150 PSI at 46.4 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, larger automotive and fleet service bays, tire and truck shops, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI setting earns its place where a press, a clamping fixture, a truck tire bead seater or an older air tool wants more than a 125 PSI header will give after line losses. The 131 gallon receiver stores roughly 60 gallons more air than the 71 gallon build, which softens the effect of short heavy draws such as impact tools, blow-off stations and cabinet blasting.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67527774109971,"sku":"4152043908","price":9153.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as10-131gal-tank-mount-dryer-150-psi-rotary-screw-air-compressor.png?v=1790373943"},{"product_id":"abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253BM 10 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253BM is the quiet, higher output 10 HP machine in the AS-B range. It delivers 39.8 CFM at a 125 PSI maximum and runs at just 65 dBA, which is about 4 dBA below the standard AS-10 and quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it uses the wider AS-15 frame rather than the compact AS-10 frame, which is where the extra airflow and the lower noise come from. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S253BM (part number 4152043909)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil consumption\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM for 10S through 20 HP units quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, which keeps oil carryover and condensation low, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B range the pressure, the airflow and the mounting move independently. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the same machine set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e reaches 175 PSI at 29.9 CFM, all three in the identical 454 lb cabinet. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253BM\u003c\/a\u003e at the same 125 PSI, this unit gives 3.4 CFM more air and runs 4 dBA quieter for 35 lbs more weight. Stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e reaches 52.1 CFM in the same 37 x 28 x 40 in footprint. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e puts the same air end on a tank mount receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e adds an integrated dryer to that package. Pick on CFM first, then on pressure, then on whether you want the tank and the dryer in one skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, heavy assembly and production line work, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and cleaning and surface preparation. At 39.8 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two to three bay shop fed through a full shift. The 65 dBA rating is the reason to choose this one over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 39.8 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size with headroom, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67543024501011,"sku":"4152043909","price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm_db1579cb-a32c-4272-aefe-8eb931bf6b49.png?v=1790869047"},{"product_id":"abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503BM 10 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503BM is the 150 PSI build of the quiet, higher output 10 HP machine in the AS-B range. It delivers 35.6 CFM free air delivery at a 150 PSI maximum and runs at just 65 dBA, quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it stays compact for a 10 HP screw. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S503BM (part number 4152043910)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver and no dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil carryover\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with three stage vertical oil separation, which keeps oil carryover and air loss low across long duty cycles, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-10S base mount build, pressure and flow trade against each other on the same machine. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-10S253BM\u003c\/a\u003e gives 39.8 CFM and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003e175 PSI AS-10S753BM\u003c\/a\u003e gives 29.9 CFM, both in the identical 454 lb, 37 x 28 x 40 in cabinet as this 150 PSI build at 35.6 CFM. The 150 PSI build is the middle choice, and the one to specify when a long header or a tool rated above the usual 125 PSI shop standard leaves too little margin at the point of use. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e at the same 150 PSI, the AS-10S delivers 35.6 CFM rather than 34.1 and runs 65 dBA rather than 69, which matters when the compressor shares a room with the people using it. If you would rather buy the receiver and the plumbing in one piece, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003etank mount AS-10S503TM\u003c\/a\u003e is the same air end on a receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e adds an integrated dryer to that skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. ABAC builds the AS-B range for heavy assembly, production line assembly, and cleaning and preparation work, the jobs where air demand is close to continuous and the conditions are not gentle. The 65 dBA rating is the reason to choose the AS-10S over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. The \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is rated at 50 CFM, comfortably above this compressor's 35.6 CFM output, which is the margin you want so the dryer is not running at its limit on a hot day, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67543527194899,"sku":"4152043910","price":8500.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm_dd0e63d6-3a49-4900-829f-b7a2a0339955.png?v=1790869050"},{"product_id":"abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753BM 10 HP Rotary Screw Air Compressor - Base Mount, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753BM is the 175 PSI build of the quiet, higher output 10 HP machine in the AS-B range. It delivers 29.9 CFM free air delivery at a 175 PSI maximum and runs at just 65 dBA, quiet enough to leave on the shop floor near the point of use instead of walling it into a compressor room. This is the base mount version, so it ships without a receiver and plumbs into an air tank you already own or one sized to your demand. At 454 lbs in a 37 x 28 x 40 in cabinet it stays compact for a 10 HP screw. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-10S753BM (part number 4152043911)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver and no dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 454 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil carryover\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is built for continuous duty, so it holds a steady line pressure through a full shift rather than recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with three stage vertical oil separation, which keeps oil carryover and air loss low across long duty cycles, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-10S base mount build, pressure and flow trade against each other on the same machine. The \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-10S253BM\u003c\/a\u003e gives 39.8 CFM and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-10S503BM\u003c\/a\u003e gives 35.6 CFM, both in the identical 454 lb, 37 x 28 x 40 in cabinet as this 175 PSI build at 29.9 CFM. Specify 175 PSI when a tool or process genuinely needs the pressure rather than as headroom, because you are paying close to 10 CFM for it against the 125 PSI build. If you would rather buy the receiver and the plumbing in one piece, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e131 gallon tank mount AS-10S753TM\u003c\/a\u003e is the same air end on a receiver, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e adds an integrated dryer to that skid.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. The 175 PSI rating is what to look at when line losses across a long header leave too little margin at the tool, or when a press, a plasma table or a pneumatic clamp is specified above the 125 PSI a standard shop machine delivers. The 65 dBA rating is the reason to choose the AS-10S over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. The \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is rated at 50 CFM, comfortably above this compressor's 29.9 CFM output, which is the margin you want so the dryer is not running at its limit on a hot day, and it runs on 115V so it plugs in beside the compressor without new wiring. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67544389320979,"sku":"4152043911","price":8499.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-10s753bm.png?v=1790640709"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253TM is the quiet, higher output 10 HP machine in the AS-B range, delivered on a 131 gallon air receiver as one assembled package. It gives 39.8 CFM at a 125 PSI maximum and runs at just 65 dBA, about 4 dBA below the standard AS-10 and quiet enough to stand on the shop floor near the point of use instead of being walled into a compressor room. Because the air end and the tank ship together, installation comes down to setting it in place, landing power and tying into the header. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S253TM (part number 4152043918)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eThree stage vertical oil separation, low oil consumption\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eCFM for 10S through 20 HP units quoted as free air delivery per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops running air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, which keeps oil carryover and condensation low, and ABAC pairs it with an energy efficient motor and a digital controller so the service schedule lives on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath it is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting move independently. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the identical package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e reaches 175 PSI at 29.9 CFM, so every step up in pressure costs airflow. Against the standard \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TM\u003c\/a\u003e on the same 131 gallon tank at the same 125 PSI, this unit gives 3.4 CFM more air and runs 4 dBA quieter. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the bare 454 lb base mount at the same pressure and airflow. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is this same tank mount build with a refrigerated dryer already integrated, which saves plumbing a separate dryer in. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TM\u003c\/a\u003e gives 30.5 CFM at 67 dBA on the same receiver; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e carries 52.1 CFM at 69 dBA.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, plasma tables, packaging lines, and any operation where a piston compressor is cycling too hard to hold line pressure. At 39.8 CFM it will carry several air ratchets, an orbital sander and a plasma cutter on the same line, or keep a two to three bay shop fed through a full shift. The 131 gallon receiver gives the compressor room to ride out short bursts of heavy demand, so it runs longer and rests longer rather than loading and unloading all day. The 65 dBA rating is the reason to choose this one over the standard AS-10 when the compressor has to share space with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 39.8 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the matching 50 CFM size and runs on 115V, so it plugs in beside the compressor without new wiring; the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e is the next size up if you want more headroom. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67544941854995,"sku":"4152043918","price":8575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_4b9500e2-6ea7-49db-a8dd-78cb5bbc9ffe.png?v=1790946148"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503TM is a 10 HP rotary screw air compressor and a 131 gallon air receiver supplied as one factory assembly, built for shops that need steady air all shift rather than the stop and start cycle of a piston unit. It delivers 35.6 CFM at 150 PSI and runs at 65 dBA, because this is the quiet 10S air end rather than the standard 10 HP block, so the machine can sit on the shop floor instead of in a separate compressor room. The screw unit and the tank ship mounted and plumbed together, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S503TM (part number 4152043919)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 750 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eSmart digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the quiet air end\u003c\/h3\u003e\n\u003cp\u003eABAC builds two 10 HP air ends. The standard block in the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e gives 34.1 CFM at 150 PSI and 69 dBA on the same size receiver. The 10S block in this machine gives 35.6 CFM at the same pressure and 65 dBA. Four decibels is roughly half the perceived loudness, which is usually what decides whether the compressor gets its own room or lives in the corner of the shop. The extra 1.5 CFM is useful, but the noise figure is the reason most buyers pay the difference. The trade is weight and footprint: 750 lbs over 76 x 27 x 62 in against 714 lbs on the standard build.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware. This machine sits in the middle of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is the same 750 lb package set for 125 PSI at 39.8 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs air. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is this same air end as a bare base mount at 454 lbs on a 37 x 28 in footprint. If 35.6 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e holds 150 PSI at 46.4 CFM on the same 76 x 27 x 62 in platform.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. The 150 PSI rating suits shops running impact tools, pneumatic presses or clamping equipment that need pressure above the common 125 PSI setting, and the 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eAir leaving any rotary screw is hot and saturated, so drying is the next decision rather than an optional extra. If your air feeds paint, pneumatic controls or precision tools, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is this exact machine with a refrigerated dryer fitted and plumbed at the factory, 844 lbs on the same footprint, which removes the job of sizing, siting and piping a separate dryer. A particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. Give the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items and the digital controller tracks the intervals, so keep a spare set on the shelf. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67546950074643,"sku":"4152043919","price":8854.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_6a4b8909-05d8-4af2-8b5b-348578473165.png?v=1790946149"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753TM 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753TM is a 10 HP rotary screw compressor and a 131 gallon air receiver supplied as one factory assembly, built for shops that need steady air all shift rather than the stop and start cycle of a piston unit. It delivers 29.9 CFM at 175 PSI and runs at 65 dBA, quiet enough to sit on the shop floor instead of in a separate compressor room. This is the quiet 10S air end set to the highest pressure offered on a 10 HP AS machine, so it is the build to specify when a tool on the line genuinely needs 175 PSI rather than more volume. Because the screw unit and the tank ship mounted and plumbed together, installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S753TM (part number 4152043920)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 750 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a tank mounted screw\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The one duty pattern a screw genuinely dislikes is short cycling, and the 131 gallon receiver underneath this machine is what prevents it: the tank absorbs short bursts of demand so the air end runs loaded for useful stretches rather than starting and unloading every few seconds. Buying the compressor and the receiver as a single factory assembly also removes the part of the install that usually goes wrong. There is no separate tank to site, no interconnecting pipe to fabricate and no second set of mounts. The installer lands power and ties into the header. Air leaving any screw comes out hot and saturated, so if the system feeds paint, pneumatic controls or precision tools, plan on drying it; see the comparison below for the factory dryer build.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware, and this machine sits at the pressure end of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is the same 750 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e runs 125 PSI at 39.8 CFM. Going from 125 to 175 PSI costs roughly 10 CFM on the same 10 HP motor, so buy pressure only to the level your highest tool actually needs. If you want drying handled in the same package, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e is this same build with an integrated refrigerated dryer at 844 lbs. If you already own a receiver, the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint. Within the 10 HP AS machines the 175 PSI rating is offered on the 10S air end only, so this is the 10 HP route to that pressure. If 29.9 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e holds the same 175 PSI at 41.7 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eWork that a 125 or 150 PSI machine cannot cover: pneumatic presses and clamping fixtures, air operated diaphragm pumps, laser cutting assist gas, sandblasting cabinets, and heavy impact tooling that loses torque the moment line pressure drops. It also handles ordinary production and fabrication duty alongside those, with the headroom to run a long pipe drop without the pressure at the far end falling below what the tool is rated for. Automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure are all good fits. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Confirm your piping, fittings and hose are rated above 175 PSI before you commission it, because a system assembled around a 125 PSI machine is not automatically suited to this one. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. There is no dryer fitted to this build, so air treatment is the open decision: a refrigerated dryer sized to 29.9 CFM plus a particulate and coalescing filter set behind it will keep water, pipe scale and oil carryover out of your distribution piping. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67546992902419,"sku":"4152043920","price":7437.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-tank-mount-rotary-screw-air-compressor_b81a060f-e681-44f3-b97e-fba914c3c0ba.png?v=1790946148"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-10S253TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 39.8 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S253TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single assembly. It delivers 39.8 CFM at 125 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the quiet 10S air end, the highest airflow 10 HP machine in the AS-B range, and the 125 PSI build is the one to specify when the shop is short of air rather than short of pressure. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S253TMD (part number 4152043927)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 39.8 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is the same 844 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. If you already have drying handled, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. Against the standard 10 HP air end, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10253TMD\u003c\/a\u003e gives 36.4 CFM at 69 dBA on the same tank, so the 10S buys roughly 3 CFM more air and about 4 dBA less noise for the same 10 HP. Stepping down, the \u003ca href=\"\/products\/abac-as-7-5-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-7.5251TMD\u003c\/a\u003e carries 30.5 CFM with a dryer; stepping up, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e carries 52.1 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing booths, production and fabrication floors, automotive and fleet service bays, tire and truck shops, plasma and laser tables, packaging lines, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. At 39.8 CFM it will keep several air ratchets, an orbital sander or a continuous blow off fed through a shift without the line pressure sagging. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67574836101395,"sku":"4152043927","price":11787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor.png?v=1790946107"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-10S503TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 35.6 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S503TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor on the quiet 10S air end, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 35.6 CFM at 150 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S503TMD (part number 4152043928)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 35.6 CFM free air delivery\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAt 150 PSI this is the middle setting of the three pressures offered on the 10S air end, and on identical hardware pressure and airflow trade directly against each other. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e is the same 844 lb package set for 125 PSI at 39.8 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TMD\u003c\/a\u003e runs 175 PSI at 29.9 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow on the same 10 HP motor. Set against the standard 10 HP package on the same tank, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TMD\u003c\/a\u003e delivers 34.1 CFM at 69 dBA, so the 10S buys about 1.5 CFM more air and 4 dBA less noise, which matters when the compressor shares a room with the people using it. If drying is already handled upstream, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. If 35.6 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e holds the same 150 PSI at 46.4 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003ePaint and finishing work, production and fabrication floors, automotive and fleet service bays, tire and truck shops, heavy assembly, cleaning and parts preparation, and cabinet and woodworking shops where moisture in the air line causes rejects or tool wear. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. The 150 PSI build is the one to choose when tools, presses or a plant header need pressure above the usual 125 PSI shop standard, and the 65 dBA rating lets it sit on the floor it serves rather than in a dedicated room.\u003c\/p\u003e\n\u003cp\u003ePart of the ABAC AS-B screw range from the \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e, our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e if you are drying an existing system, or browse all \u003ca href=\"\/collections\/air-compressors\"\u003estationary air compressors\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted as free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67574893642003,"sku":"4152043928","price":11787.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor_6b6d8fdd-a12b-4270-b10a-a6f9b7c113a0.png?v=1790946157"},{"product_id":"abac-as-10s-10-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor","title":"ABAC AS-10S753TMD 10 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 175 PSI, 29.9 CFM, 65 dBA","description":"\u003cp\u003eThe ABAC AS-10S753TMD is a complete compressed air station in one package: a 10 HP rotary screw compressor, a 131 gallon air receiver and a refrigerated dryer, mounted and plumbed as a single factory assembly. It delivers 29.9 CFM at 175 PSI and runs at 65 dBA, quiet enough to sit in the work area instead of a separate compressor room. This is the quiet 10S air end set to the highest pressure offered on a 10 HP AS machine, which makes it the build to specify when a tool on the line genuinely needs 175 PSI rather than more volume. There is no separate tank or dryer to source, site and pipe, so installation comes down to setting it in place, wiring it and connecting your air line. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-10S753TMD (part number 4152043929)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 29.9 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 65 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon air receiver with integrated refrigerated dryer\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 844 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eIntegrated air end block of aluminum construction\u003c\/li\u003e\n\u003cli\u003e3-stage vertical oil separation process\u003c\/li\u003e\n\u003cli\u003eIntuitive digital controller for monitoring and service intervals\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy the three in one package\u003c\/h3\u003e\n\u003cp\u003eA rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs the way a piston machine does. The catch is that air leaving any screw comes out hot and saturated, so a dryer is not optional on a system feeding paint, pneumatic controls or precision tools. Buying the compressor, the receiver and the refrigerated dryer as one factory assembly removes the part of the job that usually goes wrong: no separate dryer to size and source, no interconnecting pipe to fabricate, no second set of mounts, and no chance of a dryer undersized for the air end in front of it. The installer lands power and ties into the header. The 131 gallon receiver underneath keeps the screw from short cycling, which is the one duty pattern a screw genuinely dislikes. At 175 PSI the drying step matters more, not less, because compressing further wrings more water out of the air and that condensate has to leave the system before it reaches your piping.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the 10S air end, pressure and airflow trade directly against each other on identical hardware, and this machine sits at the pressure end of that trade. The \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-10S503TMD\u003c\/a\u003e is the same 844 lb package set for 150 PSI at 35.6 CFM, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-10S253TMD\u003c\/a\u003e runs 125 PSI at 39.8 CFM. Going from 125 to 175 PSI costs roughly 10 CFM on the same 10 HP motor, so buy pressure only to the level your highest tool actually needs. If you already have drying handled, the \u003ca href=\"\/products\/abac-as-10s-10-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753TM\u003c\/a\u003e is this same 131 gallon build without the dryer at 750 lbs, and the \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e is the bare base mount at 454 lbs on a 37 x 28 in footprint for a shop that already owns a receiver. Within the 10 HP AS machines the 175 PSI rating is offered on the 10S air end only, so this is the 10 HP route to that pressure. If 29.9 CFM is short of what your tool list draws, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e holds the same 175 PSI at 41.7 CFM.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eWork that a 125 or 150 PSI machine cannot cover: pneumatic presses and clamping fixtures, air-operated diaphragm pumps, laser cutting assist gas, sandblasting cabinets, and heavy impact tooling that loses torque the moment line pressure drops. It also handles the ordinary production and fabrication duties alongside those, with the headroom to run a long pipe drop without the pressure at the far end falling below what the tool is rated for. The integrated dryer removes water before it reaches the distribution piping, which matters anywhere air touches a finish, a pneumatic control or a precision tool. At 65 dBA the machine can sit in the work area rather than in a dedicated compressor room, which is often what decides the 10S over the standard air end when the compressor shares a room with the people using it.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet about 3 feet of clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Confirm your piping, fittings and hose are rated above 175 PSI before you commission it, because a system assembled around a 125 PSI machine is not automatically suited to this one. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals, so keep a spare set on the shelf. The refrigerated dryer is already fitted, so the remaining air treatment decision is filtration: a particulate and coalescing filter set behind the dryer protects tools and finishes from pipe scale and oil carryover. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the wider \u003ca href=\"https:\/\/aircompressorstore.com\/collections\/atlas-copco\"\u003eAtlas Copco group\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnit performance measured according to ISO 1217 Annex C; for 10S to 20 HP machines CFM figures are quoted at free air delivery. Noise level measured according to ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575561519379,"sku":"4152043929","price":9976.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-b-131-gallon-tank-mount-dryer-rotary-screw-air-compressor_85b8d769-130c-4521-860d-fff52f8f7e61.png?v=1790946157"},{"product_id":"abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253BM 15 HP Rotary Screw Air Compressor - Base Mount, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15253BM is a 15 HP base mount rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. It delivers 52.1 CFM at a 125 PSI maximum and runs at 69 dBA. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 478 lbs in a 37 x 28 x 40 in cabinet it sets down in about the space a 60 gallon vertical piston compressor already takes up. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253BM (part number 4152043912)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, paired with an energy efficient motor and a controller that handles programmed maintenance, so the service schedule sits on the panel rather than on a clipboard. At 69 dBA the machine is quiet enough to sit in the working space rather than in a closet built to contain it.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. At 52.1 CFM it will carry several bays of air tools, a plasma table, or a blast or finishing setup without the pressure sagging when a second operator pulls a trigger.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the AS-B range the 15 HP frame is the step most shops make when they add a second bay or a larger blasting or finishing setup. At 52.1 CFM it carries roughly 16 CFM more air than the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253BM\u003c\/a\u003e at the same 125 PSI, and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20253BM\u003c\/a\u003e adds another 8.5 CFM on top of that. Pressure is the other axis: the same 15 HP frame is offered at \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI\u003c\/a\u003e for 46.4 CFM and \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003e175 PSI\u003c\/a\u003e for 41.7 CFM, all three in the same 478 lb cabinet. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow.\u003c\/p\u003e\u003ch3\u003eBuilding the system around it\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 52.1 CFM the matching dryer is the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65 refrigerated air dryer\u003c\/a\u003e, which runs on 115V so it plugs in beside the compressor. If you would rather buy the tank already built in, the same 15 HP air end is sold as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003etank mount\u003c\/a\u003e, and as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003etank mount with an integrated dryer\u003c\/a\u003e at 871 lbs.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575828906259,"sku":"4152043912","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15253bm.png?v=1790899889"},{"product_id":"abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503BM 15 HP Rotary Screw Air Compressor - Base Mount, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503BM is a 15 HP base mount rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. It delivers 46.4 CFM at a 150 PSI maximum and runs at 69 dBA. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 478 lbs in a 37 x 28 x 40 in cabinet it keeps the footprint small enough to sit near the point of use. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15503BM (part number 4152043913)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, paired with an energy efficient motor and a controller that handles programmed maintenance, so the service schedule sits on the panel rather than on a clipboard.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003ePressure and flow trade against each other on the same machine. This 150 PSI unit moves 46.4 CFM, against 52.1 CFM on the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e at 125 PSI and 41.7 CFM on the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM\u003c\/a\u003e at 175 PSI, all three in the same 478 lb cabinet. Choose 150 PSI when your tools or process genuinely call for it at the point of use rather than at the compressor. Across the HP range the \u003ca href=\"\/products\/abac-as-10-10-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503BM\u003c\/a\u003e gives 34.1 CFM at the same pressure and the \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503BM\u003c\/a\u003e gives 54 CFM. If you do not already own a receiver, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e puts the same air end on a tank at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e adds an integrated dryer at 871 lbs.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. At 46.4 CFM it will carry several bays of air tools, a plasma table, or a blast or finishing setup without the pressure sagging when a second operator pulls a trigger.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 46.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e is the matching size at 50 CFM, and it runs on 115V so it plugs in beside the compressor. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer range\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67575927832851,"sku":"4152043913","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15503bm.png?v=1790903151"},{"product_id":"abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753BM 15 HP Rotary Screw Air Compressor - Base Mount, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15753BM is a 15 HP base mount rotary screw air compressor for shops that have outgrown a piston unit and need steady air through a full shift. This is the 175 PSI build, delivering 41.7 CFM at 69 dBA, for plants running tooling or processes that specify a higher line pressure than a standard 125 PSI machine will hold. Base mount means the unit ships without a receiver, so you plumb it into an air tank you already own or size a tank to the job. At 478 lbs in a 37 x 28 x 40 in cabinet it sets down in about the space a 60 gallon vertical piston compressor already takes up. Power is 208-230-460V three-phase.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753BM (part number 4152043914)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: base mount, no receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 478 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 37 x 28 x 40 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with eco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor, low oil consumption\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. That is the reason to move off a piston machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is a fully integrated aluminum block with vertical oil separation, paired with an energy efficient motor and a controller that handles programmed maintenance, so the service schedule sits on the panel rather than on a clipboard. ABAC designs the air end for limited air loss and low oil consumption, which keeps running cost and oil carryover down over the life of the machine. At 69 dBA it is quiet enough to sit in the working space rather than in a closet built to contain it.\u003c\/p\u003e\u003ch3\u003eWhy 175 PSI\u003c\/h3\u003e\u003cp\u003eMost shop air tools are specified at 90 PSI at the inlet, and a 125 PSI compressor covers them with room to spare. The 175 PSI build exists for the cases that do not fit that pattern: long runs of undersized pipe where line loss eats the margin, a process or test rig that specifies a higher supply pressure, or a plant standardizing every compressor on one higher setpoint. Buying pressure you do not need costs airflow, because the same 15 HP air end gives up CFM as discharge pressure rises. Check what your highest pressure tool or process actually calls for at the point of use before choosing this build over the 125 PSI version.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003ePressure and airflow trade against each other on the same 15 HP frame. At 175 PSI this unit delivers 41.7 CFM, against 46.4 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003e150 PSI AS-15503BM\u003c\/a\u003e and 52.1 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003e125 PSI AS-15253BM\u003c\/a\u003e, all three in the same 478 lb cabinet. Within the 175 PSI line the 10 HP \u003ca href=\"\/products\/abac-as-10s-10-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-10S753BM\u003c\/a\u003e carries 29.9 CFM and the 20 HP \u003ca href=\"\/products\/abac-as-20-20-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-20753BM\u003c\/a\u003e carries 48.5 CFM, with this 15 HP frame between them at 41.7 CFM. If you do not already own a receiver, the same 175 PSI air end is sold as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003etank mount\u003c\/a\u003e at 776 lbs, and as a \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003etank mount with an integrated dryer\u003c\/a\u003e at 871 lbs.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, blasting and finishing booths, and any operation running a tool or process that calls for more line pressure than a 125 PSI machine will hold. At 41.7 CFM it will carry several bays of air tools, a plasma table, or a blast or finishing setup without the pressure sagging when a second operator pulls a trigger.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eBase mount is the starting point for a modular compressed air system. Size a receiver to your demand and pipe it downstream of the compressor, then add moisture control if the air goes to paint, tires or anything that hates water. At 41.7 CFM the usual pairing is a COOL series dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50 refrigerated air dryer\u003c\/a\u003e, whose 232 PSI maximum working pressure covers a 175 PSI system and which runs on 115V so it plugs in beside the compressor. Oil, oil filter and separator element are the service items, so keep a spare set on the shelf.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm receiver sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577696387347,"sku":"4152043914","price":9196.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15753bm.png?v=1790947798"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15253TM is a 15 HP rotary screw air compressor shipped on a 131 gallon air receiver, built for shops that need steady air through a full shift rather than the stop and start cycle of a piston unit. It delivers 52.1 CFM at 125 PSI and runs at 69 dBA on 208-230-460V three-phase power. Because the screw unit and the tank arrive as one assembly, installation comes down to setting it in place, wiring it and connecting the air line.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253TM (part number 4152043921)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs | Dimensions: 76\" x 27\" x 62\"\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy the tank is part of the machine\u003c\/h3\u003e\u003cp\u003eA rotary screw is built to run continuously, so the receiver is not there to give the compressor a rest the way a piston machine's tank is. It is there to absorb short bursts of demand, to hold line pressure steady when several tools trigger at once, and to knock some of the condensate out of the air before it reaches your piping. Buying the tank already mounted removes the sizing question, the second footprint and the interconnecting pipe, and it is why most shops replacing a worn out 80 gallon piston unit go straight to a tank mount screw.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B frame the mounting and the pressure move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e is the same air end with no tank at 478 lbs, for a shop that already owns a receiver, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e is this machine with a dryer built onto the same frame at 871 lbs. Moving up in pressure trades airflow in the identical cabinet: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e gives 41.7 CFM at 175 PSI. On volume, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e10 HP AS-10253TM\u003c\/a\u003e delivers 36.4 CFM on the same tank and the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20253TM\u003c\/a\u003e steps up to 60.6 CFM at 71 dBA. Pick the pressure first, because every step up costs airflow, then size the air end to the tool list.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, cabinet and woodworking shops, and any operation where a reciprocating compressor is working too hard to hold line pressure. At 69 dBA the package is quiet enough to sit near the point of use instead of in a separate compressor room, and the 131 gallon receiver carries it through short bursts of heavy demand without short cycling.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe compressor and the receiver come as one unit, so what is left is drying, filtration and drainage. At 52.1 CFM the usual match is a refrigerated dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65\u003c\/a\u003e, with a condensate drain on the tank so the water it knocks out actually leaves the system. If you would rather have the dryer factory piped and wired onto the frame, buy the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e instead and skip the second install.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577761431827,"sku":"4152043921","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15253tm.png?v=1790951007"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503TM is the 150 PSI build of the 15 HP machine in the AS-B screw range, delivered on a 131 gallon horizontal receiver as a single assembly. It puts out 46.4 CFM at a 150 PSI maximum and runs at 69 dBA, quiet enough to sit in the work area rather than a separate compressor room. Tank mount is the configuration to buy when there is no receiver already in the plant: compressor, tank and controls arrive piped and wired together, so installation comes down to setting it on the floor, bringing power to it and connecting the air line. At 776 lbs in a 76 x 27 x 62 in footprint it takes roughly the floor space of a workbench. Power is 208-230-460V three-phase.\u003c\/p\u003e\n\u003ch3\u003eKey specifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eModel: AS-15503TM (part number 4152043922)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum working pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eMounting: tank mount on a 131 gallon receiver\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven access for programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhy a screw instead of another piston\u003c\/h3\u003e\n\u003cp\u003eA piston compressor builds air in bursts and needs time to cool between them. A rotary screw is rated for continuous duty, so it holds a flat line pressure through a full shift instead of sagging and recovering between jobs. That is the reason shops using air most of the day move off a reciprocating machine that is cycling hard, running hot and filling the room with noise. The AS-B air end is built around a state of the art design that limits air loss, and ABAC pairs it with an energy efficient motor and a digital controller, so the operating menus and the service intervals sit on the panel rather than on a clipboard. The trade is that a screw dislikes short cycling, which is exactly what the 131 gallon receiver underneath this one is there to prevent.\u003c\/p\u003e\n\u003ch3\u003eHow it compares\u003c\/h3\u003e\n\u003cp\u003eAcross the AS-B range pressure, airflow and mounting all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e is the same 15 HP machine set for 125 PSI, trading pressure for airflow at 52.1 CFM on the identical tank, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e goes the other way to 175 PSI and 41.7 CFM. Buy pressure only to the level your highest tool actually needs, because every step up costs airflow. Stepping down in power, the \u003ca href=\"\/products\/abac-as-10-10-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-10503TM\u003c\/a\u003e gives 34.1 CFM at the same 150 PSI; stepping up, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TM\u003c\/a\u003e carries 54 CFM at 71 dBA. If you already own a receiver, the same air end comes as the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e base mount at 478 lbs on a 37 x 28 x 40 in footprint. If you want drying built in, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e is this exact machine with the refrigerated dryer already mounted and piped.\u003c\/p\u003e\n\u003ch3\u003eTypical applications\u003c\/h3\u003e\n\u003cp\u003eProduction and fabrication floors, larger automotive and fleet service shops, tire and truck bays, cabinet and woodworking shops, plasma and laser tables, packaging lines, and any operation running tooling or a test rig specified above 125 PSI. At 46.4 CFM it will keep a bank of air ratchets, a sander and a continuous blow off fed through a full shift, or several bays working at once without the line pressure sagging. The tank mount build is the one to buy for a new installation, or for a shop replacing a worn piston compressor outright, because it takes receiver sizing and tank piping out of the job.\u003c\/p\u003e\n\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\n\u003cp\u003eGive the cabinet clear air on the cooling side, keep it out of a hot corner, and run it on its own circuit sized to the motor nameplate. Oil, oil filter and separator element are the service items, and the digital controller tracks the intervals. Air leaving any screw carries moisture, so if it goes to paint, tires, pneumatic controls or anything that hates water, put a refrigerated dryer behind it. At 46.4 CFM the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is the minimum size and the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eCOOL 65\u003c\/a\u003e gives useful headroom; both run on 115V, so they sit beside the compressor without new wiring. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e range. Call us with your tool list and duty cycle and we will confirm connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C. Noise measured per ISO 2151:2004 using ISO 9614\/2 (sound intensity method).\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764872467,"sku":"4152043922","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15503tm.png?v=1790951864"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753TM 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15753TM is the 175 PSI build of the 15 HP machine in the AS-B screw range, shipped on a 131 gallon air receiver as a single assembly. It delivers 41.7 CFM at a 175 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the screw unit and the tank arrive mounted together, installation comes down to setting it in place, wiring it and connecting the air line.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753TM (part number 4152043923)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eWorking pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 776 lbs | Dimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end\u003c\/li\u003e\n\u003cli\u003eEco-friendly vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with menu driven operation and programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy 175 PSI costs airflow\u003c\/h3\u003e\u003cp\u003eA screw air end turns the same displacement whatever pressure you ask of it, so every step up in discharge pressure takes volume off the top. In this cabinet that is 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI and 41.7 CFM here at 175 PSI, all from the same 15 HP motor. Specify 175 PSI when a tool or a process genuinely needs it, for example an air over hydraulic press, a high pressure blow off, or a long distribution run that arrives at the bench well below the compressor setpoint. Buying the pressure as headroom costs you a fifth of the air for nothing.\u003c\/p\u003e\u003ch3\u003eWhy the tank is part of the machine\u003c\/h3\u003e\u003cp\u003eA rotary screw is built to run continuously, so the receiver is not there to give the compressor a rest the way a piston machine's tank is. It is there to absorb short bursts of demand, to hold line pressure steady when several tools trigger at once, and to knock condensate out of the air before it reaches your piping. Buying the tank already mounted removes the sizing question, the second footprint and the interconnecting pipe.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B frame the mounting and the pressure move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM\u003c\/a\u003e is the same air end with no tank at 478 lbs, for a shop that already owns a receiver, and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e is this machine with a refrigerated dryer built onto the same frame at 871 lbs. Drop the pressure and the airflow comes back: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e gives 52.1 CFM at 125 PSI on the same receiver. If you need 175 PSI and more volume, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003e20 HP AS-20753TM\u003c\/a\u003e holds the same pressure at 48.5 CFM and 71 dBA. Pick the pressure first, then size the air end to the tool list.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction and fabrication floors, automotive and fleet service bays, tire and truck shops, plasma cutting, and any operation running tools rated above 150 PSI where a reciprocating compressor is working too hard to hold line pressure. At 69 dBA the package is quiet enough to sit near the point of use instead of in a separate compressor room, and the 131 gallon receiver carries it through short bursts of heavy demand without short cycling.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe compressor and the receiver come as one unit, so what is left is drying, filtration and drainage. At 41.7 CFM the usual match is a refrigerated dryer rated above that figure, such as the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e, with a condensate drain on the tank so the water it knocks out actually leaves the system. If you would rather have the dryer factory piped and wired onto the frame, buy the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e instead and skip the second install.\u003c\/p\u003e\u003cp\u003ePart of the ABAC AS-B 5 to 20 HP screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C at free air delivery. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577764905235,"sku":"4152043923","price":9714.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15753tm.png?v=1790951864"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor","title":"ABAC AS-15253TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 125 PSI, 52.1 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15253TMD is the all in one version of ABAC's 15 HP AS-B screw compressor: compressor, 131 gallon receiver and refrigerated air dryer built onto a single frame and shipped as one machine. It delivers 52.1 CFM at a 125 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer is already plumbed and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint it occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15253TMD (part number 4152043930)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP, energy efficient\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52.1 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 125 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eDigital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhat the dryer adds to the package\u003c\/h3\u003e\u003cp\u003eABAC lists the same compressor and tank without the dryer at 776 lbs, so the refrigerated dryer accounts for roughly 95 lbs of the 871 lb total and none of the floor space: the cabinet and the 76 x 27 x 62 in footprint are identical either way. That trade matters more than it sounds. A 15 HP screw pushing 52.1 CFM of warm saturated air into cool shop piping will drop a real volume of water somewhere, and the only open question is whether it comes out at the machine or at the drops above your benches. The factory dryer is matched to the 52.1 CFM this unit actually produces, so there is no sizing exercise, no second electrical circuit, and no mismatch between a compressor bought this year and a dryer added later.\u003c\/p\u003e\u003ch3\u003eWhy the 125 PSI build\u003c\/h3\u003e\u003cp\u003eThe AS-15 cabinet is sold at three pressures and the airflow moves with it: 52.1 CFM at 125 PSI, 46.4 CFM at 150 PSI, and 41.7 CFM at 175 PSI, all from the same 15 HP motor and the same frame. Choosing 125 PSI buys about 25 percent more air than the 175 PSI build, which is the right trade whenever the tool list works at 90 to 100 PSI at the point of use, as most sanders, impact tools, spray guns and plasma torches do. Step up to 150 or 175 PSI only when a specific machine calls for it or a long run of undersized pipe eats the pressure on the way out, because header pressure you do not need is horsepower you pay for every hour the compressor runs.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TM\u003c\/a\u003e is the same compressor and the same tank without the dryer, at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-125-psi-rotary-screw-air-compressor\"\u003eAS-15253BM\u003c\/a\u003e is the bare base mount machine at 478 lbs for shops that already own a receiver. Moving up in pressure trades airflow: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e gives 46.4 CFM at 150 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e gives 41.7 CFM at 175 PSI, both in the identical cabinet. If the tool list calls for more air at the same 125 PSI, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-20253TMD\u003c\/a\u003e steps up to 20 HP and 60.6 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eAt 52.1 CFM this is a whole shop machine rather than a bench supply: a body shop running a booth alongside air tools, a cabinet or millwork shop on orbital sanders and nailers, a fabrication shop feeding a plasma table, or a small production line on pneumatic controls and instrument air. Dry air is the thread running through all of them. Paint, powder coat, plasma consumables and air logic fail in the same way when water reaches them, and here they are all fed from a discharge that has already passed through the dryer. The 131 gallon receiver gives the package room to ride out bursts of heavy demand without short cycling, and at 69 dBA it is quiet enough to sit near the point of use instead of in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left to decide is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on both the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Keep an oil, oil filter and separator element set on the shelf and let the controller's programmed maintenance schedule tell you when they are due. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and the full range of \u003ca href=\"\/collections\/fixed-speed-rotary-screw-air-compressors\"\u003efixed speed rotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765232915,"sku":"4152043930","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd.png?v=1790967821"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor","title":"ABAC AS-15503TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 150 PSI, 46.4 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15503TMD is the all in one version of ABAC's 15 HP AS-B screw compressor set up for higher pressure: compressor, 131 gallon receiver and air dryer built onto a single frame and shipped as one machine. It delivers 46.4 CFM at a 150 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer is already plumbed and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint it occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15503TMD (part number 4152043931)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 46.4 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 150 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eWhy 150 PSI, and what it costs you\u003c\/h3\u003e\u003cp\u003ePressure and airflow trade against each other on the same air end. The 150 PSI build of this machine carries 46.4 CFM where the 125 PSI build carries 52.1 CFM, from identical hardware in an identical cabinet at the same 871 lbs. Buy the pressure only if a tool, a press, a clamp or a test stand genuinely needs it. If nothing on the floor asks for more than 125 PSI, the lower pressure build gives you about 12 percent more air for the same power draw. Where 150 PSI is the requirement, running it here rather than regulating down from a 175 PSI machine keeps the compressor off its least efficient operating point.\u003c\/p\u003e\u003ch3\u003eWhy the dryer belongs on the compressor\u003c\/h3\u003e\u003cp\u003eA rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs. It also pushes warm, saturated air into the piping, and that water condenses out in the lines rather than in the compressor room. Drying at the source keeps condensate out of the distribution piping altogether instead of leaving traps, filters and drip legs downstream to catch it. In a paint booth, a powder coating line or a plasma table, that is the difference between a clean part and a reject.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. The \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TM\u003c\/a\u003e is the same compressor and the same tank without the dryer, at 776 lbs, and the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-150-psi-rotary-screw-air-compressor\"\u003eAS-15503BM\u003c\/a\u003e is the bare base mount machine at 478 lbs for shops that already own a receiver. Moving on pressure trades airflow: the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e gives 52.1 CFM at 125 PSI and the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TMD\u003c\/a\u003e gives 41.7 CFM at 175 PSI, both in the identical cabinet. If the tool list calls for more air at this same 150 PSI, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-20503TMD\u003c\/a\u003e steps up to 20 HP and 54 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, powder coating, plasma cutting, pneumatic controls and instrument air, press and clamp circuits that will not hold at 125 PSI, and any shop where moisture in the line shows up as a defect in the finished part. The 131 gallon receiver gives the machine room to ride out short bursts of heavy demand without short cycling, and at 69 dBA the package is quiet enough to sit near the point of use rather than in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Size the piping for 46.4 CFM at the far end of the run, not at the compressor. See the rest of the \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765265683,"sku":"4152043931","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd_d04c97ae-b263-450c-b1e8-4f6e0a315e0f.png?v=1790967824"},{"product_id":"abac-as-15-15-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor","title":"ABAC AS-15753TMD 15 HP Rotary Screw Air Compressor - 131 Gallon Tank Mount with Dryer, 175 PSI, 41.7 CFM, 69 dBA","description":"\u003cp\u003eThe ABAC AS-15753TMD is the all in one, high pressure build of ABAC's 15 HP AS-B screw compressor: compressor, 131 gallon receiver and refrigerated air dryer assembled onto a single frame and shipped as one machine. It delivers 41.7 CFM at a 175 PSI maximum and runs at 69 dBA on 208-230-460V three-phase power. Because the dryer arrives already piped and wired into the package, there is no second unit to size, site, pipe or power, and the air leaving the discharge is already dry. At 871 lbs in a 76 x 27 x 62 in footprint the whole package occupies roughly the floor space of the tank alone.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: AS-15753TMD (part number 4152043932)\u003c\/li\u003e\n\u003cli\u003eMotor: 15 HP\u003c\/li\u003e\n\u003cli\u003eAir delivery: 41.7 CFM\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eNoise level: 69 dBA\u003c\/li\u003e\n\u003cli\u003eTank: 131 gallon receiver, tank mount\u003c\/li\u003e\n\u003cli\u003eIntegrated refrigerated air dryer, factory piped and wired\u003c\/li\u003e\n\u003cli\u003ePower supply: 208-230-460\/3\/60\u003c\/li\u003e\n\u003cli\u003eWeight: 871 lbs\u003c\/li\u003e\n\u003cli\u003eDimensions: 76 x 27 x 62 in\u003c\/li\u003e\n\u003cli\u003eFully integrated aluminum block air end with vertical oil separation technology\u003c\/li\u003e\n\u003cli\u003eEnergy efficient motor and digital controller with programmed maintenance\u003c\/li\u003e\n\u003cli\u003eBrand: ABAC, part of the Atlas Copco group\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cem\u003eCFM measured per ISO 1217 Annex C, quoted at free air delivery for the 10S to 20 HP range. Noise measured per ISO 2151:2004 using ISO 9614\/2.\u003c\/em\u003e\u003c\/p\u003e\u003ch3\u003eBuilt for continuous duty\u003c\/h3\u003e\u003cp\u003eThe AS-B platform runs a fully integrated aluminum air end block with vertical oil separation, a design ABAC uses to hold down air loss and oil carryover over long run hours. A rotary screw is rated for 100 percent duty, so it holds line pressure through a full shift instead of recovering between jobs the way a piston machine does. The digital controller handles pressure setpoints, start and stop behavior and programmed maintenance intervals, so the machine looks after itself through the shift. Air delivery is rated to ISO 1217 Annex C and the sound level to ISO 2151, which means these figures compare directly against any other manufacturer quoting the same standards rather than a best case number.\u003c\/p\u003e\u003ch3\u003eWhy the dryer belongs on the compressor\u003c\/h3\u003e\u003cp\u003eA screw compressor pushes warm, saturated air into the piping, and that water condenses out in the lines rather than in the compressor room. Drying at the source keeps condensate out of the distribution piping altogether instead of leaving traps, filters and drip legs downstream to catch it. In a paint booth, a powder coating line or on a plasma table, that is the difference between a clean part and a reject. It also matters more at 175 PSI than at 125, because air compressed harder carries more moisture to drop out once it expands at the tool.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the 15 HP AS-B range the pressure, the mounting and the dryer all move independently. This is the highest pressure build, and the trade is air delivery: 41.7 CFM at 175 PSI against 46.4 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-150-psi-rotary-screw-air-compressor\"\u003eAS-15503TMD\u003c\/a\u003e at 150 PSI and 52.1 CFM from the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-dryer-125-psi-rotary-screw-air-compressor\"\u003eAS-15253TMD\u003c\/a\u003e at 125 PSI, all three in the identical cabinet at the same 871 lbs. Specify 175 PSI when a tool or a process genuinely needs the pressure, not as headroom, because every PSI of headroom is CFM you are not getting. If the air downstream is already treated, the \u003ca href=\"\/products\/abac-as-15-15-hp-131-gallon-tank-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753TM\u003c\/a\u003e is the same compressor and the same tank without the dryer at 776 lbs. Where a receiver is already installed, the \u003ca href=\"\/products\/abac-as-15-15-hp-base-mount-175-psi-rotary-screw-air-compressor\"\u003eAS-15753BM base mount\u003c\/a\u003e is the bare machine at 478 lbs in a 37 x 28 x 40 in footprint. If the shop regularly asks for more than 41.7 CFM at this pressure, the \u003ca href=\"\/products\/abac-as-20-20-hp-131-gallon-tank-mount-dryer-175-psi-rotary-screw-air-compressor\"\u003eAS-20753TMD\u003c\/a\u003e steps up to 20 HP and 48.5 CFM at 71 dBA. Pick on pressure first, then on CFM, then on whether the tank and dryer come in the package or get bought separately.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003ePaint and finishing work, powder coating, plasma cutting, pneumatic controls and instrument air, and any shop where moisture in the line shows up as a defect in the finished part. The 175 PSI rating suits shops running higher pressure tooling, long distribution runs where line loss eats into working pressure, and processes specified above 150 PSI at the point of use. The 131 gallon receiver gives the machine room to ride out short bursts of heavy demand without short cycling, and at 69 dBA the package is quiet enough to sit near the point of use rather than in a dedicated compressor room.\u003c\/p\u003e\u003ch3\u003eWhat to pair it with\u003c\/h3\u003e\u003cp\u003eThe dryer and the receiver are already in the box, so what is left is drainage, filtration and pipe. Put a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e on the tank and the dryer so the water they knock out actually leaves the system, add \u003ca href=\"\/collections\/air-filters\"\u003ecoalescing and particulate filtration\u003c\/a\u003e downstream if the air feeds paint or instruments, and run \u003ca href=\"\/collections\/aluminum-air-pipe\"\u003ealuminum compressed air pipe\u003c\/a\u003e so the distribution side does not put rust back into air you just dried. Part of the ABAC AS-B screw range from the Atlas Copco group. See the rest of our \u003ca href=\"\/collections\/rotary-screw-air-compressors\"\u003erotary screw air compressors\u003c\/a\u003e and our wider range of \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e. Call us with your tool list and duty cycle and we will confirm sizing, connection sizes and installation clearances before you pipe it in.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"208-230-460V 3-Phase","offer_id":67577765298451,"sku":"4152043932","price":12451.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-as-15-tmd_4deb74d0-9357-4e73-b411-da53534b8ad0.png?v=1790967830"},{"product_id":"abac-abc7-v2-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC7-2112DH2P 15 HP Ironman Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 52 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC7-2112DH2P is the C2 pump machine in the Ironman Duplex Series: two independent 7.5 HP motor and pump assemblies on a single 120 gallon horizontal tank. Each side runs a C2 two-stage cast iron pump rated 26 CFM, for 52 CFM combined at a maximum 175 PSI. Because the two assemblies are separate, one can come down for service while the other keeps air on the line, which is the reason most shops step up to a duplex rather than buying one larger simplex machine. Choose 230V single-phase (ABC7-2112DH2P) or 230V three-phase (ABC7-2312DH2P).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC7-2112DH2P (230V 1-phase) \/ ABC7-2312DH2P (230V 3-phase)\u003c\/li\u003e\n\u003cli\u003ePower: 15 HP total (2 x 7.5 HP)\u003c\/li\u003e\n\u003cli\u003ePumps: two C2 two-stage pumps, full cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 52 CFM combined (26 CFM per pump)\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60 or 230\/3\/60\u003c\/li\u003e\n\u003cli\u003eDrive: belt drive, two independent motor and pump assemblies\u003c\/li\u003e\n\u003cli\u003eAlternating control to decrease downtime\u003c\/li\u003e\n\u003cli\u003eDual control to increase output\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel settings\u003c\/li\u003e\n\u003cli\u003eWarranty: 2 year full, assembled in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat the duplex control actually does\u003c\/h3\u003e\u003cp\u003eTwo pumps on one tank only pay for themselves if the controller uses them properly, and the Ironman Duplex panel is built for that. Alternating control rotates which side leads, so run hours and service intervals are shared instead of one pump carrying the shop while the other sits. Dual control brings both sides on together when demand climbs, for the full 52 CFM. Between the two, each pump runs cooler, rests longer and reaches an oil change later than a single pump doing the same total work, and the panel settings are fully programmable so the changeover matches how your floor actually draws air. The practical benefit is the one that matters on a production day: a belt change, an oil service or a failed pump takes half the capacity offline, not all of it.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eAcross the Ironman duplex machines on the 120 gallon horizontal tank, the pump choice sets the airflow. The \u003ca href=\"\/products\/abac-abc5-duplex-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e10 HP ABC5-21120HD\u003c\/a\u003e pairs two C1 pumps for 32 CFM, and the \u003ca href=\"\/products\/abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e15 HP ABC7-21120HD\u003c\/a\u003e pairs two C1 pumps for 42 CFM. This machine keeps the same 15 HP total and the same tank but steps the pumps up to C2 for 52 CFM, which is the cheapest way to add 10 CFM without moving up a motor size or a service panel. Above it, the \u003ca href=\"\/products\/abac-abc10-duplex-20-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e20 HP ABC10-23120HD\u003c\/a\u003e reaches 64 CFM, and the \u003ca href=\"\/products\/abac-abc10-2312dhp-20-hp-120-gallon-horizontal-ironman-duplex-air-compressor\"\u003eABC10-2312DHP\u003c\/a\u003e is the C2 version of that pair. If redundancy is not the point, the single pump \u003ca href=\"\/products\/abac-abc7-2180v2p-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2P\u003c\/a\u003e uses the same C2 pump on an 80 gallon vertical tank in a far smaller footprint. Size on the CFM your tools actually draw, then confirm your panel can carry the phase you pick.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC builds the Ironman Duplex Series for professional work that needs a consistent air supply: metal and wood shops, auto body and repair shops, tire inflation, hammering, grinding, fastening, orbital sanding and equipment operation. In practice that means production floors, multi-bay service centers, fabrication and welding bays, and fleet maintenance operations where several tools draw at once and a compressor going down stops the whole shop. A duplex also suits a shop with a wide gap between its light and heavy demand: one side carries the quiet hours and both run when the floor is full, so neither pump spends the day at full duty.\u003c\/p\u003e\u003ch3\u003ePower, installation and air treatment\u003c\/h3\u003e\u003cp\u003eTake three-phase power if the panel has it, since three-phase motors start easier and run cooler on a compressor that cycles all day. Both sides can run together, so size the circuit for the pair even though the control normally alternates them, and leave clearance around the flywheels for cooling air and service access. A 120 gallon receiver collects real water, so plan the drain. A two-stage piston running to 175 PSI also puts warm, wet air into the line, and that moisture carries down to whatever is on the end of it. If the air reaches paint, plasma, pneumatic controls or anything that rusts, pair this compressor with a refrigerated dryer rated at or above its 52 CFM output, such as the \u003ca href=\"\/products\/abac-cool-65-refrigerated-air-dryer-115v\"\u003eABAC COOL 65\u003c\/a\u003e or, for margin on a hot shop floor, the \u003ca href=\"\/products\/abac-cool-75-refrigerated-air-dryer-115v\"\u003eCOOL 75\u003c\/a\u003e, plus a filter regulator at the drop. Browse the rest of our \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the Atlas Copco group. The C2 build steps up from the 42 CFM C1 duplex while still spreading run time across two pumps, which keeps each one cooler and shortens recovery under heavy demand. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":67579199553811,"sku":"2020141043","price":8921.0,"currency_code":"USD","in_stock":true},{"title":"230V 3-Phase","offer_id":67579199586579,"sku":"2020141044","price":8752.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc7-2112dh2p-duplex-120-gallon-horizontal-ironman-air-compressor.png?v=1791414430"},{"product_id":"abac-abc10-2312hp-10-hp-120-gallon-horizontal-ironman-air-compressor","title":"ABAC ABC10-2312HP 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Horizontal, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10-2312HP pairs a 10 HP motor with the C2 two-stage cast iron pump on a 120 gallon horizontal ASME tank, delivering 32 CFM at a maximum 175 PSI. The horizontal layout sits low and long, 74 in end to end but only 50 in tall, which suits shops that would rather run the compressor along a wall or under a mezzanine than give up vertical footprint. This is a three-phase machine only. Choose 230V three-phase (ABC10-2312HP) or 460V three-phase (ABC10-43120HP).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-2312HP \/ ABC10-43120HP\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, belt drive\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, fully cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at maximum pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60 or 460\/3\/60\u003c\/li\u003e\n\u003cli\u003eDimensions (L x W x H): 27 x 74 x 50 in\u003c\/li\u003e\n\u003cli\u003eWeight: 728 lbs\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard, discharge valve, magnetic starter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a two-stage cast iron pump\u003c\/h3\u003e\u003cp\u003eThe C2 is the cast iron pump ABAC builds the Ironman range around, and the second stage is what carries the air up to 175 PSI rather than the 125 to 135 PSI a shop is used to seeing from a lighter single-stage machine. Compressing in two steps with cooling in between means lower discharge temperatures per stage, and cast iron cylinders shed that heat and wear slowly instead of glazing. The practical result is a pump rated for heavy daily duty that can be serviced and rebuilt rather than replaced, which is the difference between a shop compressor and a consumable one.\u003c\/p\u003e\u003ch3\u003eWhat the 120 gallon horizontal tank changes\u003c\/h3\u003e\u003cp\u003eStorage is what keeps line pressure flat when several tools draw at once. A 120 gallon receiver gives the motor far fewer starts than an 80 gallon build on the same 32 CFM pump, and fewer starts means less heat, less contactor wear and steadier pressure at the drop. The horizontal layout spends that capacity on length instead of height: 74 in of wall and 50 in of clearance, against the 74 in of height a 120 gallon vertical needs. Plan for 728 lbs on the floor and check your door and ceiling clearance before delivery day.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eSame pump, same 32 CFM, different footprint. The \u003ca href=\"\/products\/abac-abc10-2312vp-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003eABC10-2312VP vertical build\u003c\/a\u003e stands 74 in tall on a 30 x 41 in base and weighs 765 lbs, trading floor space for height. This horizontal unit runs 74 in long and only 50 in tall at 728 lbs, which is the one to pick under a mezzanine or a low ceiling. If you want the automatic tank drain, low oil level shut off and belt guard aftercooler fitted at the factory, the \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC10-23120HFF full feature horizontal\u003c\/a\u003e is the same machine with the protection package already on it. If 32 CFM is already marginal, the \u003ca href=\"\/products\/abac-abc10-2312dhp-20-hp-120-gallon-horizontal-ironman-duplex-air-compressor\"\u003eABC10-2312DHP duplex\u003c\/a\u003e puts two 10 HP pumps on one 120 gallon tank for 64 CFM and lets you service one side while the other keeps air on the line.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eProduction shops, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several air tools or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs. ABAC rates the Ironman range for professional heavy duty work: hammering, grinding, orbital sanding, fastening, spraying, tire inflation and general equipment operation. At 32 CFM it will carry a pair of busy sanders or ratchets, a plasma cutter, or a blast cabinet in short sessions.\u003c\/p\u003e\u003ch3\u003eInstallation and air treatment\u003c\/h3\u003e\u003cp\u003ePlan on a three-phase circuit sized to the motor nameplate and a disconnect within sight of the machine; there is no single-phase option in this frame size. Leave clearance around the flywheel and belt guard for cooling air and for belt service, and pipe the discharge with a flexible connector so vibration does not load the shop line. Oil, the air filter element and the belts are the routine service items. Where the air feeds paint, plasma or pneumatic controls, add a refrigerated dryer rated above the compressor's 32 CFM: the \u003ca href=\"\/products\/abac-cool-50-refrigerated-air-dryer-115v\"\u003eABAC COOL 50\u003c\/a\u003e is rated 50 CFM and runs on standard 115V single-phase power, so it sits beside the compressor without new wiring. A \u003ca href=\"\/collections\/coalescing-air-filters\"\u003ecoalescing filter\u003c\/a\u003e downstream protects finishing work, and a \u003ca href=\"\/collections\/condensate-drains\"\u003econdensate drain\u003c\/a\u003e keeps the water the tank collects off your floor.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the Atlas Copco group. The 120 gallon reservoir cuts motor starts and holds a steadier line pressure than an 80 gallon build, while the horizontal tank keeps overall height down where ceiling clearance is tight. See the rest of our \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e, the full range of \u003ca href=\"\/collections\/air-dryers\"\u003eair dryers\u003c\/a\u003e, or browse all \u003ca href=\"\/collections\/air-compressors\"\u003eair compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":67616727335187,"sku":"2020141030","price":4722.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":67616727367955,"sku":"2020141040","price":4722.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-2312hp-120-gallon-horizontal-ironman-air-compressor.png?v=1791439701"},{"product_id":"abac-abc10-2312vp-10-hp-120-gallon-vertical-ironman-air-compressor","title":"ABAC ABC10-2312VP 10 HP Two-Stage Ironman Air Compressor - 120 Gallon Vertical, 175 PSI, 32 CFM C2 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC10-2312VP pairs a 10 HP motor with the C2 two-stage cast iron pump on a 120 gallon vertical ASME tank, delivering 32 CFM at a maximum 175 PSI. The vertical tank puts the full 120 gallon reserve into a 30 x 41 in footprint, which suits shops that have ceiling height to spare but not much open floor. This is a three-phase machine only. Choose 230V three-phase (ABC10-2312VP) or 460V three-phase (ABC10-43120VP).\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModels: ABC10-2312VP (230V) \/ ABC10-43120VP (460V)\u003c\/li\u003e\n\u003cli\u003eWarthog part numbers: 2020141031 (230V), 2020141046 (460V)\u003c\/li\u003e\n\u003cli\u003eMotor: 10 HP, belt drive\u003c\/li\u003e\n\u003cli\u003ePump: C2 two-stage, four-cylinder V-shape, fully cast iron construction\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM at maximum pressure\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon vertical, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/3\/60 or 460\/3\/60\u003c\/li\u003e\n\u003cli\u003eDimensions: 30 x 41 x 74 in\u003c\/li\u003e\n\u003cli\u003eWeight: 765 lbs\u003c\/li\u003e\n\u003cli\u003eFully enclosed belt guard, discharge valve, magnetic starter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy the cast iron pump matters\u003c\/h3\u003e\u003cp\u003eABAC builds two pump families for its stationary machines. The hybrid pumps mix an aluminum head with cast iron cylinders and suit shops that run air in bursts. The Ironman C2 is fully cast iron, four cylinders in a V arrangement, and ABAC positions it as the premium alternative for the toughest working conditions. Cast iron sheds heat better and tolerates long stretches under load, which is what separates a compressor that survives a decade of two-shift production from one that gets replaced after three years of it. The magnetic starter protects the motor on every start, and the fully enclosed belt guard keeps the drive out of reach without choking off cooling air. That construction is also why this unit weighs 765 lbs rather than the few hundred a comparable aluminum-pump machine would.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eSame pump, same 32 CFM, different footprint. The \u003ca href=\"\/products\/abac-abc10-2312hp-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC10-2312HP horizontal build\u003c\/a\u003e runs 74 in long and only 50 in tall at 728 lbs, which is the one to pick under a mezzanine or a low ceiling. This vertical unit stands 74 in tall on a 30 x 41 in base and weighs 765 lbs, trading height for floor space. If you want the automatic tank drain, low oil level shut off and belt guard aftercooler, step up to the \u003ca href=\"\/products\/abac-abc10-ff-10-hp-120-gallon-vertical-ironman-air-compressor\"\u003eABC10-23120VFF full feature vertical\u003c\/a\u003e. If 32 CFM is already marginal, the \u003ca href=\"\/products\/abac-abc10-2312dhp-20-hp-120-gallon-horizontal-ironman-duplex-air-compressor\"\u003eABC10-2312DHP duplex\u003c\/a\u003e puts two 10 HP pumps on one 120 gallon tank for 64 CFM and lets you service one side while the other keeps air on the line. Below this machine, the \u003ca href=\"\/products\/abac-abc7-2180v2p-7-5-hp-80-gallon-vertical-ironman-air-compressor\"\u003e7.5 HP ABC7-2180V2P\u003c\/a\u003e runs the same C2 pump at 24 CFM on an 80 gallon vertical tank, which is the step down if the panel will not carry a 10 HP three-phase load.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC rates the Ironman range for professional heavy duty work from wood and metal workshops to auto body and repair shops: hammering, spraying, grinding, fastening, orbital sanding, tire inflation and general equipment operation. In practice this is the machine for production shops, fabrication and welding bays, truck and fleet maintenance, tire shops running multiple lifts, and any operation where several air tools or a plasma cutter draw at the same time and the compressor needs to hold pressure through the shift rather than recover between jobs. A plasma table and a pair of impact guns will pull a 20 CFM machine down inside a minute; 32 CFM with 120 gallons behind it gives the pump time to catch up. The 120 gallon reservoir also cuts motor starts, which is the single biggest factor in how long the contactor and the motor windings last.\u003c\/p\u003e\u003ch3\u003eInstallation notes\u003c\/h3\u003e\u003cp\u003ePlan on a three-phase circuit sized to the motor nameplate and a disconnect within sight of the machine. The 74 in height needs headroom for the tank and clearance above it for service, so check the ceiling before the 30 x 41 in footprint sells you on it. Leave clearance around the flywheel and belt guard for cooling air and for belt service, and pipe the discharge with a flexible connector so vibration does not load the shop line. Keep the room ventilated; a compressor this size moves a lot of heat into a closed room. Oil, the air filter element and the belts are the routine service items, and belt tension is worth checking in the first month after commissioning. Where the air goes to paint, instruments or anything that will not tolerate moisture, add a \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryer\u003c\/a\u003e downstream of the receiver.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the Atlas Copco group. The 120 gallon reservoir holds a steadier line pressure than an 80 gallon build, while the vertical tank frees up the floor space a horizontal receiver of the same capacity would take. Browse the full \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressor\u003c\/a\u003e range, or the rest of our \u003ca href=\"\/collections\/air-compressors\"\u003eair compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 3-Phase","offer_id":67616867549459,"sku":"2020141031","price":5628.0,"currency_code":"USD","in_stock":true},{"title":"460V 3-Phase","offer_id":67616867582227,"sku":"2020141046","price":5592.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc10-2312vp.png?v=1791252322"},{"product_id":"abac-abc5-2112dhp-10-hp-120-gallon-horizontal-ironman-duplex-air-compressor","title":"ABAC ABC5-2112DHP 10 HP Ironman Duplex Air Compressor - 120 Gallon Horizontal, 175 PSI, 32 CFM C1 Cast Iron Pump","description":"\u003cp\u003eThe ABAC ABC5-2112DHP Ironman duplex mounts two independent 5 HP motor and pump assemblies on a single 120 gallon horizontal ASME tank. Each side runs a C1 two-stage cast iron pump rated 16 CFM, for 32 CFM combined at a maximum 175 PSI. Because the two assemblies are separate, one can come down for service while the other keeps air on the line, which is the reason most shops step up to a duplex in the first place. It runs on 230V single-phase power.\u003c\/p\u003e\u003ch3\u003eKey specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eModel: ABC5-2112DHP\u003c\/li\u003e\n\u003cli\u003eWarthog part number: 2020141042\u003c\/li\u003e\n\u003cli\u003ePower: 10 HP total (2 x 5 HP)\u003c\/li\u003e\n\u003cli\u003ePumps: two C1 two-stage pumps, cast iron cylinders\u003c\/li\u003e\n\u003cli\u003eAir delivery: 32 CFM combined (16 CFM per pump)\u003c\/li\u003e\n\u003cli\u003eMaximum pressure: 175 PSI\u003c\/li\u003e\n\u003cli\u003eTank: 120 gallon horizontal, ASME tank and safety valves\u003c\/li\u003e\n\u003cli\u003ePower supply: 230\/1\/60\u003c\/li\u003e\n\u003cli\u003eAlternating control, so the lead pump rotates and run time is shared\u003c\/li\u003e\n\u003cli\u003eFully programmable control panel\u003c\/li\u003e\n\u003cli\u003eBelt drive with fully enclosed belt guards\u003c\/li\u003e\n\u003cli\u003eMagnetic starter and discharge valve standard\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy a duplex on single-phase power\u003c\/h3\u003e\u003cp\u003eA single 10 HP piston compressor normally calls for three-phase service. Splitting the same output across two 5 HP assemblies keeps each motor within what a 230V single-phase supply can carry, which is what puts 10 HP of output within reach of a shop on utility single-phase. Both pumps feed the same receiver, and either side can be isolated for a belt or valve change without shutting the floor down.\u003c\/p\u003e\u003ch3\u003eWhat alternating control actually does\u003c\/h3\u003e\u003cp\u003eABAC builds the Ironman Duplex range around alternating control, which rotates the lead pump so wear is spread across both assemblies instead of accumulating on one. Through a quiet morning one pump carries the load on its own and the second never starts, so neither side racks up hours it does not need. When every bay is working, both run together and the pair delivers the full 32 CFM. The fully programmable control panel is what sets those parameters, so the changeover point and the cut in and cut out pressures are tuned to how your shop actually draws air rather than left at a factory default.\u003c\/p\u003e\u003ch3\u003eHow it compares\u003c\/h3\u003e\u003cp\u003eWithin the Ironman duplex range the pumps scale with the output. The \u003ca href=\"\/products\/abac-abc7-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC7 15 HP duplex\u003c\/a\u003e pairs two 7.5 HP C1 pumps for 42 CFM, the \u003ca href=\"\/products\/abac-abc7-v2-duplex-15-hp-120-gallon-horizontal-ironman-air-compressor\"\u003e15 HP ABC7-2112DH2P\u003c\/a\u003e reaches 52 CFM on C2 pumps, and the \u003ca href=\"\/products\/abac-abc10-2312dhp-20-hp-120-gallon-horizontal-ironman-duplex-air-compressor\"\u003eABC10-2312DHP 20 HP duplex\u003c\/a\u003e steps up to two C2 pumps for 64 CFM on the same 120 gallon horizontal platform. If your service is three-phase and redundancy is not the point, the single pump \u003ca href=\"\/products\/abac-abc10-2312hp-10-hp-120-gallon-horizontal-ironman-air-compressor\"\u003eABC10-2312HP\u003c\/a\u003e reaches the same 32 CFM from one C2 pump on the same tank. Size on the CFM your tools actually draw, then confirm the incoming service matches.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cp\u003eABAC rates the Ironman Duplex range for extensive use, the consistent supply that metal and wood workshops and auto body and repair shops need, and lists agriculture and farm, food and beverage and general industrial work among its applications. On a single-phase floor that means service garages, body shops, small production and fabrication cells, and fleet maintenance bays that need air all day and cannot afford to lose the whole compressor to one failed pump. The 120 gallon horizontal receiver keeps the pumps from short cycling between tool triggers and gives impact wrenches and sanders a reserve to draw on.\u003c\/p\u003e\u003ch3\u003ePlanning the installation\u003c\/h3\u003e\u003cp\u003eTreat this as two compressors sharing one receiver. Each side runs on its own 230V single-phase circuit sized to its motor nameplate, so size the service to the pair rather than to a single 5 HP machine. Leave clearance down both sides for cooling airflow and for belt guard and pump access, since service on one side happens while the other is still running. Drain the receiver on a schedule or fit an automatic drain, because condensate left standing is what ends a tank's life early.\u003c\/p\u003e\u003ch3\u003eAir treatment\u003c\/h3\u003e\u003cp\u003eA piston compressor delivers saturated air, so spray finishing, plasma cutting, and air logic all want drying downstream. At 32 CFM combined the \u003ca href=\"\/products\/abac-cool-35-refrigerated-air-dryer-115v\"\u003eABAC COOL 35\u003c\/a\u003e covers both pumps running together with a little headroom, and it runs on a 115V outlet rather than needing its own three-phase feed. See the rest of our \u003ca href=\"\/collections\/refrigerated-air-dryers\"\u003erefrigerated air dryers\u003c\/a\u003e if the line feeds more than this machine.\u003c\/p\u003e\u003cp\u003ePart of ABAC's Ironman cast iron range from the \u003ca href=\"\/collections\/atlas-copco\"\u003eAtlas Copco\u003c\/a\u003e group. Standard features across the two-stage Ironman series include a fully enclosed belt guard, fully cast iron pump design, ASME tank and safety valves, a discharge valve, and a magnetic starter. Splitting demand across two C1 pumps keeps each one running cooler and cuts duty cycle on both, which is what extends pump life in shops where air is drawn all day long. Browse the full range of \u003ca href=\"\/collections\/piston-air-compressors\"\u003episton air compressors\u003c\/a\u003e.\u003c\/p\u003e","brand":"ABAC","offers":[{"title":"230V 1-Phase","offer_id":67617266303251,"sku":"2020141042","price":7862.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0825\/3141\/8387\/files\/abac-abc5-2112dhp-duplex-120-gallon-horizontal-ironman-air-compressor.png?v=1791270343"}],"url":"https:\/\/aircompressorstore.com\/collections\/abac-10-to-15-hp-air-compressors.oembed","provider":"Warthog Air Compressor Store","version":"1.0","type":"link"}